Menu 13
NAAC Accredited (Grade A)
नैक द्वारा ग्रेड A से मान्य
Departments  >>  Production and Industrial Engineering  >  Publications

Year 2003

Authors Title Publication Paper type Volume Number Pages Year Publisher
Ghosh, S; Acherjee, B; Kuar, AS;  Application of Grey Wolf Optimizer Algorithm in Electrochemical Machining Process Optimization Industrial Automation and Robotics Book chapter     45-60 2023 CRC Press
Duggirala, Aparna; Acherjee, Bappa; Mitra, Souren;  Laser Welding of Materials: A Comprehensive Overview Futuristic Manufacturing Book chapter     143-162 2023 CRC Press
Rukaiya Kausher, Rambabu Singh, Anand Kumar Sinha, Satya Narayan Sethy, Sudhir Kumar, Shatrudhan Pandey, Adham E Ragab, Ahmed Mohamed Assessing Impacts of Mining-Induced Land Use Changes on Groundwater and Surface Water Quality Using Isotopic and Hydrogeochemical Signatures Sustainability Journal 15 14 11041 2023 MDPI
Muralidhar Singh M, Manish Kumar, P Sivaiah, Vijaya G., Amit Kumar, Dheeraj Kumar, Shatrudhan Pandey, Abhishek Kumar Singh, Ahmed Farouk Deifalla, S M Mozammil Hasnain Simulation of metal ceramic single layer coatings for solar energy applications Materials Science for Energy Technologies Journal       2023 Elsevier
Manish Kumar, Shatakshi Singh, Sunggon Kim, Ashutosh Anand, Shatrudhan Pandey, SM Mozammil Hasnain, Adham E Ragab, Ahmed Farouk Deifalla A hybrid model based on convolution neural network and long short-term memory for qualitative assessment of permeable and porous concrete Case Studies in Construction Materials Journal     e02254 2023 Elsevier
Jai Kumar Sharma, Sateesh Kumar, Nishant Kumar, S M Mozammil Hasnain, Shatrudhan Pandey, Ahmed Farouk Deifalla, Adham E Ragab Computational modeling of sigmoid functionally graded material (SFGM) plate Materials Research Express Journal       2023 IOP Science
Md Modassir Khan, Arun Kumar Kadian, Rabindra Prasad Sharma, SM Mozammil Hasnain, Ahmed Mohamed, Adham E Ragab, Ali Zare, Shatrudhan Pandey Emission Reduction and Performance Enhancement of CI Engine Propelled by Neem Biodiesel-Neem Oil-Decanol-Diesel Blends at High Injection Pressure Sustainability Journal 15 11 9084 2023 MDPI
Abhimannyu Sharma, Dheeraj Kumar, Amit Kumar, Nadeem Faisal, Naresh Kumar, Shatrudhan Pandey, SM Mozammil Hasnain, Tahani Mohamed Al-Hazani, Abdullah A AlKahtane, Saad Alkahtani, Rajeshwari Chatterjee Designing, Modeling, and Fabrication of a Novel Solar-Concentrating Spittoon against COVID-19 for Antibacterial Sustainable Atmosphere Sustainability Journal 15 12 9286 2023 MDPI
LN Pattanaik Nuances of Supply Chain Paradigms: Evolution and Future Research Scope. Journal of Management & Public Policy Journal 14 2   2023  
Gayatri Paul, Puja Jha, Ankita Jha, Aditya Roy Effect of Molybdenum Disulfide Dispersed Nanolubricants on the Tribological Properties of Mating Stainless Steel Pair Journal of Materials Engineering and Performance Journal     1-15 2023 Springer US
Prakash Kumar, Binay Kumar Effect of ZrB2 and Fly Ash on Tribological and Mechanical Properties of Aluminium 7075-Based Metal Matrix Composite at Elevated Temperatures in Reciprocating Motion International Journal of Metalcasting Journal     1-20 2023 Springer International Publishing
Ritesh Kumar Singh, Sanjiv Kumar Tiwari, Sharad Chandra Srivastava, Binay Kumar Hybrid Taguchi-GRA-CRITIC Optimization Method for Multi-Response Optimization of Micro-EDM Drilling Process Parameters Tehnički vjesnik Journal 30 3 804-814 2023 Strojarski fakultet u Slavonskom Brodu; Fakultet elektrotehnike, računarstva i informacijskih tehnologija Osijek; Građevinski i arhitektonski fakultet Osijek
Nishant, S.K. Jha, P. Prakash Effect of tool rotation speed on microstructure and mechanical properties of underwater friction stir welding 6061 aluminium alloy Materials Today: Proceedings Journal       2023 Elsevier
Nishant, S.K. Jha, P. Prakash Effect of tool rotation speed on mechanical properties of underwater friction stir welding of 6061-T6 and 5083-H12 aluminium alloys Materials Today: Proceedings Journal       2023 Elsevier
Nitish Kaushik, Sanjay Kumar Jha, Ravi Shankar Anand  Size effect of electrode diameter on the hole quality in micro EDM drilling of CFRP composite Materials Today: Proceedings Journal       2023 Elsevier
Nitish Kaushik, Sanjay Kumar Jha, Ravi Shankar Anand Experimental Investigation of Micro EDM Drilling in the CFRP using Response Surface Methodology Frontiers in Materials Journal 10   1147882 2023 Frontiers
Shatrudhan Pandey, Karan Kumar Mishra, Pampa Ghosh, Abhishek Kumar Singh, Sanjay Kumar Jha Characterization of tin-plated steel Frontiers in Materials Journal 10   1113438 2023 Frontiers
Pratap S, Datta Somak Fabrication of array microelectrodes: achieving geometrical characteristics using reverse micro-EDM process  Physica Scripta Journal 98   85003 2023 IOP Science
Chakraborty, Tapas; Sahu, Deepti Ranjan; Mandal, Amitava; Acherjee, Bappa;  Feasibility of Jatropha and Rice bran vegetable oils as sustainable EDM dielectrics Materials and Manufacturing Processes Journal 38 1 50-63 2023 Taylor & Francis
Kanishka, Kumar; Acherjee, Bappa;  A systematic review of additive manufacturing-based remanufacturing techniques for component repair and restoration Journal of Manufacturing Processes Journal 89   220-283 2023 Elsevier

 

Year 2022 to 2019

Authors Title Publication Paper type Volume Number Pages Year Publisher Indexing IF/C.S DOI
Kumar, Dhiraj; Sarkar, Niladri Shekhar; Acherjee, Bappa; Kuar, Arunanshu Shekhar;  Beam wobbling effects on laser transmission welding of dissimilar polymers: Experiments, modeling, and process optimization Optics & Laser Technology Journal 146   107603 2022 Elsevier SCIE 5 https://doi.org/10.1016/j.optlastec.2021.107603
Anwer, G; Acherjee, B;  Laser Welding Innovations for Polymers and Hybrid Structures. Lasers in Engineering (Old City Publishing) Journal 53     2022 Old city publishing SCIE 0.5  
Ansari, MO; Chattopadhyaya, S; Ghose, J; Sharma, S; Kozak, D; Li, C; Wojciechowski, S; Dwivedi, SP; Kilinc, HC; Krolczyk, J;  Productivity Enhancement by Prediction of Liquid Steel Breakout during Continuous Casting Process in Manufacturing of Steel Slabs in Steel Plant Using Artificial Neural Network with Backpropagation Algorithms. Materials 2022, 15, 670   Journal       2022 s Note: MDPI stays neutral with regard to jurisdictional claims in published … SCIE 3.4 https://doi.org/10.3390/ma15020670
Ansari, Md Obaidullah; Chattopadhyaya, Somnath; Ghose, Joyjeet; Sharma, Shubham; Kozak, Drazan; Li, Changhe; Wojciechowski, Szymon; Dwivedi, Shashi Prakash; Kilinc, Huseyin Cagan; Królczyk, Jolanta B;  Productivity Enhancement by Prediction of Liquid Steel Breakout during Continuous Casting Process in Manufacturing of Steel Slabs in Steel Plant Using Artificial Neural Network with Backpropagation Algorithms Materials Journal 15 2 670 2022 MDPI SCIE 3.4 https://doi.org/10.3390/ma15020670
Pattanaik, LN; Agarwal, Paras; Narayan, Urja; Ranjan, Saloni;  Optimal adaptation of supply base in dynamic demand cycles of a reconfigurable supply chain International Journal of Integrated Supply Management Journal 15 4 434-453 2022 Inderscience Publishers (IEL) Scopus 4.3 https://doi.org/10.1504/IJISM.2022.125991
Acherjee, Bappa;  Numerical study of thermo-mechanical responses in laser transmission welding of polymers using a 3-D thermo-elasto-viscoplastic FE model Welding in the World Journal 66 7 1421-1435 2022 Springer SCIE 2.1 https://doi.org/10.1007/s40194-022-01300-w
Ghosh, Debasree; Ghose, Joyjeet; Datta, Pulak; Kumari, Pallavi; Paul, Suraj;  Strategies for phase change material application in latent heat thermal energy storage enhancement: Status and prospect Journal of Energy Storage Journal 53   105179 2022 Elsevier SCIE 9.4 https://doi.org/10.1016/j.est.2022.105179
Pattanaik, Laxmi Narayan; Kant, Rajeev;  Optimization of a multi-objective lean assembly problem with reconfigurable machine cells Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture Journal     1E+16 2022 SAGE Publications Sage UK: London, England SCIE 2.6 https://doi.org/10.1177/09544054221111895
Jha, Sanjay Kumar; Anand, Ravi Shankar; Prakash, Prashant;  Effect of the process parameters on the mechanical properties of the weld joint in the friction stir welding process International Journal of Materials Engineering Innovation Journal 13 2 110-127 2022 Inderscience Publishers (IEL) Scopus 1.7 https://doi.org/10.1504/IJMATEI.2022.124195
Prakash, Prashant; Anand, Ravi Shankar; Jha, Sanjay Kumar;  Experimental Analysis of Tensile Strength of Different Thicknesses and Dissimilar Aluminum Alloys in Friction Stir Welding Journal of Materials Engineering and Performance Journal     01-Oct 2022 Springer SCIE 2.3 https://doi.org/10.1007/s11665-022-07694-4
Tiwari, SK; Singh, RK; Kumar, B;  Optimizing PM Intervals for Manufacturing Industries Using Delay-time Analysis and MOGA. Jordan Journal of Mechanical & Industrial Engineering Journal 16 3   2022   UGC care list    
Gayatri Paul, Prasanta Kumar Das, Indranil Manna Chrono-photographic Visualization and Characterization of the Flow Regimes in Rewetting by Bottom Flooding Experimental Thermal and Fluid Science Journal 139   110727 2022 Elsevier SCIE 3.2 https://doi.org/10.1016/j.expthermflusci.2022.110727
Binay Kumar, Prakash Kumar, , Materials Today: Proceedings, Preparation of hybrid reinforced aluminium metal matrix composite by using ZrB2: A systematic review Materials Today: Proceedings Journal 61 1   2022 Elsevier Scopus 3.4  
A. Anand and S. K. Tiwari,  Materials Today: Proceedings, 61, 1, 73-77, 2022. Preparation and investigation of mechanical properties of 1350-h19 Al-Zn-Al2O3 hybrid metal matrix composites by stir casting process. Materials Today: Proceedings Journal 61 1 73-77 2022 Elsevier Scopus 3.4  
Dileep Madapana, Ravi Bathe, Indranil Manna, Jyotsna Dutta Majumdar Tribocorrosion Behaviour of Laser-Induced Periodic Surface Structured Ti6Al4V Journal of Bio- and Tribo-Corrosion Journal 9   9 2022   Scopus 5.8  
Verma, Neha; Sharma, Vinay;  Sustainability Synergy with Lean Green and Six Sigma International Journal of Research and Analysis in Science and Engineering Jornal 1 2 06-Jun 2021 Springer SCIE 7.9 https://doi.org/10.1016/j.eiar.2020.106396 
Verma, Neha; Sharma, Vinay; Badar, M Affan;  Entropy-based lean, energy and six sigma approach to achieve sustainability in manufacturing system Arabian Journal for Science and Engineering Journal 46 8 8105-8117 2021 Springer Berlin Heidelberg SCIE 2.9 https://doi.org/10.1007/s13369-021-05826-x 
Oraon, Manish; Mandal, Soumen; Sharma, Vinay;  Predicting the deformation force in the incremental sheet forming of AA3003 Materials Today: Proceedings Journal 45   5069-5073 2021 Elsevier Scopus 3.4 https://doi.org/10.1016/j.matpr.2021.01.578 
Ghosh, Debasree; Kumar, Prasoon; Sharma, Siddha; Guha, Chandan; Ghose, Joyjeet;  Numerical investigation on latent heat thermal energy storage in a phase change material using a heat exchanger Heat Transfer Journal 50 5 4289-4308 2021 Wiley Online Library Scopus 5.1 https://doi.org/10.1002/htj.22075
Pattanaik, Laxmi Narayan;  Simulation optimization of manufacturing takt time for a leagile supply chain with a de-coupling point International Journal of Industrial Engineering and Management Journal 12 2 102-114 2021 University of Novi Sad Scopus 2.6 http://doi.org/10.24867/IJIEM-2021-2-280
Verma, Neha; Sharma, Vinay;  Implementation Sustainable Value Stream Mapping (Sus-VSM) in manufacturing industry. Ilkogretim Online Journal 20 6   2021   UGC care list   doi: 10.17051/ilkonline.2021.06.069
Oraon, Manish; Sharma, Vinay;  Application of Artificial Neural Network: A Case of Single Point Incremental Forming (SPIF) of Cu67Zn33 Alloy Management and Production Engineering Review Journal 12 1 17-23 2021 Polska Akademia Nauk. Czytelnia Czasopism PAN Scopus 2.5 http://dx.doi.org/10.24425/mper.2021.136868
Acherjee, Bappa;  Laser transmission welding of dissimilar plastics: 3-D FE modeling and experimental validation Welding in the World Journal 65 7 1429-1440 2021 Springer SCIE 2.1 https://doi.org/10.1007/s40194-021-01079-2
Acherjee, Bappa;  Laser transmission welding of polymers–a review on welding parameters, quality attributes, process monitoring, and applications Journal of Manufacturing Processes Journal 64   421-443 2021 Elsevier SCIE 6.2 https://doi.org/10.1016/j.jmapro.2021.01.022
Acherjee, Bappa;  State-of-art review of laser irradiation strategies applied to laser transmission welding of polymers Optics & Laser Technology Journal 137   106737 2021 Elsevier SCIE 5 https://doi.org/10.1016/j.optlastec.2020.106737
Duggirala, Aparna; Kalvettukaran, Paramasivan; Acherjee, Bappa; Mitra, Souren;  Numerical simulation of the temperature field, weld profile, and weld pool dynamics in laser welding of aluminium alloy Optik Journal 247   167990 2021 Elsevier SCIE 3.1 https://doi.org/10.1016/j.ijleo.2021.167990
Prabhakar, Vivek; Sagar, Ankit; Singh, Ritesh;  A comprehensive method for modelling leanness enablers and measuring leanness index in MSMEs using an integrated AHP-ISM-MICMAC and multi-grade fuzzy approach International Journal of Six Sigma and Competitive Advantage Journal 13   377-391 2021 Inderscience Publishers (IEL) Scopus    
Dewangan, Shailesh; Kumar, S Deepak; Jha, Sanjay Kumar; Prakash, Anand;  Prediction of formability of MIG and TIG welded joints by Erichsen cupping test and fuzzy-logic technique International Journal of Materials Engineering Innovation Journal 12 3 246-258 2021 Inderscience Publishers (IEL) Scopus 1.7  
 Sengupta, P., Basu, S., Manna, I. Structure–property correlation in a novel ZrB2–SiC ultrahigh-temperature ceramic composite with Al-alloy sinter additive  J Mater Sci Journal 56   19029–19046 2021   SCIE 4.5  
 Debnath, M.K., Anishetty, S., Majumdar, J.D., Manna I. Wear and Corrosion Protection of Interstitial Free Steel by Sputter Deposition of Alloy Coating as a Novel Alternative to Galvanizing.   J. of Materi Eng and Perform Journal 30    5682–5691 2021 Springer SCIE 2.3  
Dileep, M., Bathe, R., Manna, I. et al.  Ultrafast Laser-Induced Periodic Structuring of Titanium Alloy (Ti-6Al-4V).    J. of Materi Eng and Perform Journal 30   4000-4011 2021 Springer SCIE 2.3  
Rajkumar Ohdar, Niranjan Kumar Singh, Archana Kumari, Randhir Kumar Grey-Fuzzy Logic Based Approach in Multi-Response Optimization of Semi-Solid Forging of A356 Aluminium Alloy Materials Science Forum   1016     2021   Scopus    
Anand, Ravi Shankar; Prakash, Prashant; Jha, Sanjay Kumar; Singh, Abhishek Kumar Numerical investigations of effect of input process parameters on heat generation in friction stir welding Materials Today: Proceedings Journal 33   5354-5361 2020 Elsevier Scopus 3.4  
 Dewangan, Shailesh; Jha, Sanjay Kumar; Mandal, A;  Optimization of dry sliding wear parameters of thixoformed A356-5TiB2 in-situ composites using RSM Materials Today: Proceedings Journal 33 50 61-5065 2020 Elsevier Scopus 3.4  
 Dewangan, Shailesh; Kumar, S Deepak; Jha, Sanjay Kumar; Biswas, Chandan Kumar;  Optimization of Micro-EDM drilling parameters of Ti–6Al–4V alloy Materials Today: Proceedings Journal 33   5481-5485 2020 Elsevier Scopus 3.4  
Kaushik, Nitish; Kumar, Prakash; Ghose, Joyjeet; Jha, Sanjay K;  Study of mechanical properties of Al2014-B4C-Gr hybrid nano composite Materials Today: Proceedings Journal 33   5573-5576 2020 Elsevier Scopus 3.4  
Malhotra, Anhad; Rajak, Sonu; Jha, Sanjay Kumar;  An eco-innovative green design method by QFD and TRIZ tools-A case study of brass-ware manufacturing Pertanika J. Sci. Technol. Journal 27   2109-2121 2019   UGC care list    
Jha, SK; Karthik, D; Mandal, A;  Fatigue analysis of A356-TiB2 (5wt%) in-situ nano composites Materials Today: Proceedings Journal 18   774-779 2019 Elsevier Scopus   https://doi.org/10.1016/j.matpr.2019.06.494 
Prakash, Prashant; Jha, Sanjay Kumar; Lal, Shree Prakash;  Numerical investigation of stirred zone shape and its effect on mechanical properties in friction stir welding process Welding in the World Journal 63   1531-1546 2019 Springer Berlin Heidelberg SCIE 2.2 https://doi.org/10.1007/s40194-019-00787-0 
Ghosh, Debasree; Guha, Chandan; Ghose, Joyjeet;  Numerical investigation of paraffin wax solidification in spherical and rectangular cavity Heat and Mass Transfer Journal 55   3547-3559 2019 Springer Berlin Heidelberg SCIE 2.2 https://doi.org/10.1007/s00231-019-02680-4 
Acherjee, Bappa;  3-D FE heat transfer simulation of quasi-simultaneous laser transmission welding of thermoplastics Journal of the Brazilian Society of Mechanical Sciences and Engineering Journal 41 10 466 2019 Springer Berlin Heidelberg Berlin/Heidelberg SCiE 2.2 https://doi.org/10.1007/s40430-019-1969-3 
Jamal, Faisal; Rath, Sushant; Acherjee, Bappa;  Process modelling of flat rolling of steel Advances in Materials and Processing Technologies Journal 5 1 104-113 2019 Taylor & Francis SCIE 2.2 https://doi.org/10.1080/2374068X.2018.1526471 
Kumar, Avinash; Pattanaik, LN; Agrawal, Rajeev;  Optimal sequence planning for multi-model reconfigurable assembly systems The international journal of advanced manufacturing technology Journal 100   1719-1730 2019 Springer London SCIE 3.4 https://doi.org/10.1007/s00170-018-2826-8 
Pattanaik, Laxmi Narayan; Jena, Abinash;  Tri-objective optimisation of mixed model reconfigurable assembly system for modular products International Journal of Computer Integrated Manufacturing Journal 32 1 72-82 2019 Taylor & Francis SCIE 4.1 http://dx.doi.org/10.1080/0951192X.2018.1550673 
Pattanaik, LN; Baug, TK; Koteswarapavan, Ch;  A hybrid ELECTRE based prioritization of conjoint tools for lean and sustainable manufacturing Production Engineering Journal 13   665-673 2019 Springer Berlin Heidelberg Scopus 1.7 https://doi.org/10.1007/s11740-019-00920-4 
Chandra, Pramod; Sharma, Vinay; Kant, Shashi;  From commodity to brand: The country of origin branding perspective for Indian medicinal and aromatic plants Business Strategy & Development Journal 2 1 04-Dec 2019 Wiley Online Library UGC care list   https://doi.org/10.1002/bsd2.31 
Ghosh, Debasree; Guha, Chandan; Ghose, Joyjeet;  Numerical Simulation on Heat Transfer Analysis in Zinc Solidification Process Using Enthalpy Porosity Method   Journal       2019   UGC care list    
Verma, Ram Babu; Jha, Sanjay Kumar;  Implementation of 5s framework and barriers modelling through interpretive structure modelling in a micro small medium enterprise International Journal of Recent Technology and Engineering Journal 8 3 7010-7019 2019   Scopus   http://dx.doi.org/10.35940/ijrte.C6041.098319 

 

YEAR 2017-2018

  1. Prakasha, P., Jha, S. K. and Lal, S. P. (2017), numerical analysis of tool pin profile effect on heat generation in friction stir welding process, in , Begel House Inc., .
  2. LN and Pattanaik (2017), Analytical Tools in Research, Educreation Publishing.
  3. Pandey, S., Jha, S. K., Kumar, P. and Bharat, A. K. (2017), 'Analysis of Defects for Aluminium Copper Bimetal Fabricated by Centrifugal Casting', ELK Asia Pacific Journals.
  4. Pandey, S. and Jha, S. K. (2017), Casting Defects and its Optimization Method in Centrifugal Casting Process: A Review, in .
  5. Kumar, S. D., Karthik, D., Mandal, A. and Kumar, J. S. P. (2017), Optimization of Thixoforging process parameters of A356 alloy using Taguchi's experimental design and DEFORM Simulation, in .
  6. Prakash, A., Jha, S. K., Prasad, K. D. and Singh, A. K. (2017), 'Productivity, quality and business performance: an empirical study', International Journal of Productivity and Performance Management 66.
  7. Saw, S. K., Ghose, J. and Sarkhel, G. (2017), 'Potentiality of luffa fiber used as reinforcement in polymer composites', Green Energy and Technology 0.
  8. (2017), 'Surface quality finish in laser cutting using Taguchi design', Tehnicki vjesnik - Technical Gazette 24.
  9. Sharma, V., Chattopadhyaya, S. and Hloch, S. (2017), 'Kvaliteta završne obrade kod laserskog rezanja uporabom Taguchi dizajna', Tehnicki Vjesnik 24.
  10. Verma, N. and Sharma, V. (2017), Sustainable competitive advantage by implementing lean manufacturing "a Case study for Indian SME, in .
  11. Dewangan, D. K., Agrawal, R. and Sharma, V. (2017), 'Enablers of eco-innovation to enhance the competitiveness of the Indian manufacturing sector: An integrated ISM-fuzzy MICMAC approach', International Journal of Business Innovation and Research 13.
  12. Datta, S., Deepanshu, N. and Pratihar, D. K. (2017), 'Modelling of input-output relationships of metal inert gas welding process using soft computing-based approaches', International Journal of Computational Intelligence Studies 6.
  13. Chattopadhyay, M., Biswas, A., Singh, R. and Sur, A. (2017), 'knowledge and practice of the diabetic eye diseases amongst persons with diabetes- a cross-sectional survey', Journal of Evidence Based Medicine and Healthcare 4.
  14. Ansari, M. O., Ghose, J. and Kumar, R. (2017), Neural network based breakout predicting system for all four strands of caster in a continuous casting shop—A case study, in .
  15. Acherjee, B., Maity, D., Kuar, A. S., Mitra, S. and Misra, D. (2017), 'Optimization of laser transmission welding parameters using chicken swarm optimization algorithm: Chicken swarm algorithm optimization of laser transmission welding', Handbook of Research on Manufacturing Process Modeling and Optimization Strategies .
  16. Acherjee, B., Maity, D. and Kuar, A. S. (2017), 'Parameters optimisation of transmission laser welding of dissimilar plastics using RSM and flower pollination algorithm integrated approach', International Journal of Mathematical Modelling and Numerical Optimisation 8.
  17. Acherjee, B. (2017), Selection of optimal parameters for laser transmission welding of polycarbonate using desirability function analysis, in .
  18. Kuar, A. S., Maity, D. and Acherjee, B. (2017), 'Quality improvement of electrochemical discharge machining process using firefly algorithm: a case study', International Journal of Swarm Intelligence 3.
  19. Kant, R., Pandey, V. and Pattanaik, L. N. (2017), An NSGA II-based approach for optimization of reconfigurable cellular manufacturing system, in .
  20. Haidar, S., Sekh, M., Ghose, J. and Sutradhar, G. (2017), 'Frictional Behavior of Aluminium MMC Foam Synthesized Using Dual Foaming Agent', International Journal of Surface Engineering and Interdisciplinary Materials Science 5.

YEAR 2016-2017

  1. Rajeev Agrawal, Abhinav Goyal, Ware house location optimization for supply chain using differential Evolution and GIS, International Journal of Service and Computing Oriented Manufacturing, Vol. 2, Nos. 3/4, 2016,pp 245-257, 2016.
  2. Satyajit Mahato, Amit Rai Dixit, Rajeev Agarwal, Application of Lean Six Sigma for cost optimised solution of a field quality problem: a case study, Journal of Engineering Manufacture, SAGE Publishing, 2016.  
  3. V Sharma, S Chattopadhyaya, S Hloch, Surface quality finish in laser cutting using Taguchi design, Technical gazette, Vol.24 No.1, 2017.
  4. Kapil Deo Prasad, Sanjay Kumar Jha, Ritesh Kumar Singh, Implementation Of Quality Improvement Tools In Brassware Manufacturing Unit To Improve Quality & Enhance Productivity, International Journal of Applied Engineering Research (IJAER), Volume 11, Number 5 pp 3580-3590, 2016.
  5. S.C.Srivastava, Shariqual Hodda, A Brief Theory on Latest Trend of Filament Winding Machine, International Journal of Advanced Engineering Research and Science, Vol. 3, No. 3, 2016, 2349-6495.
  6. S.C.Srivastava, J.Singh, R.Kumar, Flexural Analysis of FGM Plate Under Uniform Line Load by Using Meshless, International Journal of Research in Engineering and Applied Sciences, pp. 151-161, Vol. 6, No. 3, 2016, 2249-3905.
  7. Prakash, S. K Jha. , K. D Prasad & A. Singh, Productivity, Quality and Business Performance: An Empirical Study, International Journal of Productivity and Performance Management, Emerald, Vol: 66, PP: 78-91, 2017, 1741-0401.
  8. Sharma, V., Agrawal, R., Sengar, A. and Bharti, K. (2016), 'Nameless Submission for Responsible Value Chains', IBA JoUrNAl of MANAgEMENt & lEADErShIp 8, 42.
  9. Prakash, S., Acherjee, B., Kuar, A. and Mitra, S. (2016), 'Robust Parameters Design and Optimization of an Underwater Nd: YAG Laser Microchanneling Process Using the Taguchi Method.', Lasers in Engineering (Old City Publishing) 33.
  10. Pattanaik, L. and Jena, A. (2016), Research Issues in Design and Operation of Reconfigurable Assembly Systems, in .
  11. Hassan, M., Jha, S. K. and Pandey, V. (2016), 'Metal Foam by Powder Metallurgy Routes: A Review Paper', Journal of Production Research & Management 6.
  12. Haidar, S., Roy, S. and Ghose, J. (2016), 'Software simulation for mechanical properties of aluminium MMC foam', American Journal of Materials Synthesis and Processing 1.
  13. Acherjee, B., Maity, D., Kuar, A. and Mitra, S. (2016), Optimal process parameters selection of lase r transmission welding of polycarbonate using cuckoo search algorithm, in .
  14. Kant, Rajeev; Pandey, Vijay; Pattanaik, LN, (2016), LEAN, AGILE & LEAGILE SUPPLY CHAIN: A COMPARATIVE STUDY, in .
  15. Verma, N. and Sharma, V. (2016), Energy value stream mapping a tool to develop green manufacturing, in .
  16. Tiwari, S. K., Singh, R. K. and Srivastava, S. C. (2016), 'Optimisation of green sand casting process parameters for enhancing quality of mild steel castings', International Journal of Productivity and Quality Management 17.
  17. Sharma, S., Singh, R. P. and Kumar, S. (2016), 'Development of nano-structured metals processed by severe plastic deformation', Indian Journal of Science and Technology 9.
  18. Sharma, S., Singh, R. P. and Kumar, S. (2016), 'Bonding characteristics of Al and Al-alloy strips: Processed by severe plastic deformation', International Journal of Engineering and Technology 8.
  19. Prasad, K. D., Jha, S. K. and Singh, R. K. (2016), 'Implementation of quality improvement tools in brassware manufacturing unit to improve quality & enhance productivity', International Journal of Applied Engineering Research 11.
  20. Pattanaik, L. N., Agrawal, R. and Kumari, L. (2016), Model of a fuzzy autonomation system for a steel wire roll mill, in .
  21. Kumar, S., Choudhary, A. K. S., Anwar, J. and Sharma, V. (2016), 'Optimization of process parameters in direct metal deposition technique using Taguchi method', International Journal of Mechanical Engineering and Technology 7.
  22. Acherjee, B., Maity, D. and Kuar, A. S. (2016), 'An approach to select the optimal process parameters of laser transmission welding using firefly algorithm', International Journal of Innovative Computing and Applications 7.
  23. Acherjee, B., Kuar, A. S., Mitra, S. and Misra, D. (2016), 'Study of laser transmission welding process using a volumetric heat source model and experimental analysis', Lecture Notes in Mechanical Engineering.

 

YEAR 2015-16

 

1.         Vijay Pandey, Puneet Saini, Joyjeet Ghose, Product development using modular design structure matrix and quality function deployment, International Journal of Production Research and Management, STM Publishers, Issue 5, Vol. 3, pp 5-19, 2015, ISSN: 2347 – 9930.

2.         Randhir Kumar and Vijay Pandey, Job shop scheduling with alternate process plan by using genetic algorithm, International Journal of  Research in advent technology, Issue 3, Vol. 9, pp. 91-98, 2015, ISSN: 2321-9637.

3.         Mohd. Hassan, Sanjay Kumar Jha, Vijay Pandey, Metal foam by powder metallurgy routes: A review paper, International Journal of Production Research and Management, STM Publishers, Issue 6, Vol. 1, pp 9-15, 2016, ISSN: 2347 – 9930.

4.         L. N. Pattanaik and Gaurav Yadav, (2015), "Decision Support model for Automated Railway Level Crossing System using Fuzzy Logic Control", Procedia Computer Science (Elsevier), Vol 48, pp.73-76.(ISSN 1877-0509).

5.         L. N. Pattanaik and Himanshu Agarwal (2015), "Magnetorheological Finishing (MRF) of a Freeform Non-magnetic Work Material", Journal for Manufacturing Science and Production, Vol 15 (ISSN 2191-0375) De Gruyter.

6.         Rajeev Kant, L. N. Pattanaik and V. Pandey (2015), "Framework for strategic implementation of cellular manufacturing in lean production environment", Journal of Manufacturing Technology Research, Vol 6, No. 3-4 (ISSN:1943-8095) Scopus Indexed.

7.         Neha Verma, Vinay Sharma, “Energy value stream mapping a tool to develop green manufacturing” Procedia engineering, Science Direct, Elsevier (2016) 149 526-534

8.         Subodh Kumar, Ajit Kumar Singh Choudhary, Vinay Sharma, “Optimization of process parameters in direct metal deposition techniques using Taguchi methods”, (2016) international journal of Mechanical Engineering and Technology, Volume 7, issue 3

9.         Arpita Roychoudhury, Vinay Sharma and B. K. Singh, “Microwave Welding: A New Tool For - Welding of Thermoplastics” Journal of Mechatronics and Intelligent Manufacturing,(2015) Volume 3, Number 3-4

10.       Manoharan. P. K, Jha. S. K and Singh. B. K, “ Analysis Of Load And Gradient Effect On Hand Force Responses During Brick Carrying In A Brick Kiln”, International Journal of Applied Engineering Research, PP. 35332-35336, Volume 10, No. 15, August 2015, ISSN: 0973-4562; Publisher: Research India Publications

11.       Prasad. K. D, Jha. S. K  and Singh. R. K, “Implementation Of Quality Improvement Tools In Brassware Manufacturing Unit To Improve Quality & Enhance Productivity”, International Journal of Applied Engineering Research, PP. 3580-3590, Volume 11, No. 5, March 2016, ISSN: 0973-4562; Publisher: Research India Publications.

12.       R K Singh, 2016,  Facility Location Selection Using MAUT and CCSD Method, International Journal of Science, Engineering and Technology Research (IJSETR), Volume 5, Issue 2, pp 405-408 .

13.       SK Tiwari, RK Singh, SC Srivastava, 2016,  Optimisation of green sand casting process parameters for enhancing quality of mild steel castings, International Journal of Productivity and Quality Management 17 (2), 127-141

14.       R. K. Singh, 2016, Facility Location Selection Using Extent Fuzzy AHP, International Advanced Research Journal in Science, Engineering and Technology Vol. 3, Issue 2, pp. 47-51.

15.       R. K. Singh, A MCDM Approach for Measuring Project Complexity,  International Journal of Engineering and Management Research, Volume-6, Issue-1, January-February-2016, Page Number: 294-302 .

16.       SK Tiwari, RK Singh, SC Srivastava, Reduction of Reworks in Green Sand Casting Process: A Six Sigma Prospective, International Journal of Applied Engineering Research (IJAER),   Volume 11, Number 5 (2016) pp 3141-3150.

17.       N. Muralidaran, S.C.Srivastava, N.L.Sarda, “Ever changing Business and Technology Landscape: Transformation Alternatives” published in the journal International Journal of Advances in Computational Engineering and Networking (IJACEN) Vol. 3, No. 1, 2015 ISSN/ISBN No. 2320-2106 SJIF Impact factor  2.849.

18.       N. Muralidaran, S.C.Srivastava, N.L.Sarda, "LFDS: Scalable and High Performance Logging for Mission critical Real Time   Applications", IJSEIA, Australia (Scopus Index Journal), pp. 13-28, Vol. 9, No. 6, 2015, ISSN/ISBN No. 1738-9984.

19.       N. Muralidaran, S.C.Srivastava, N.L.Sarda,“Implementation insight for High Performance Messaging Solution”, International Journal of Computer Sciences and Engineering, pp. 165-174,  Vol. 3, No, 5, 2015 ISSN/ISBN No.2347-2693 SJIF Impact factor  2.162.

20.       N. Muralidaran , S.C.Srivastava, N.L.Sarda, “Lean and efficient Business Tier for Performance Scaling”,International Journal of Computer Applications pp. 31-40, Vol. 118, No. 7, 2015  New York, USA ISSN/ISBN No 0975 – 8887 IJCA  Impact factor 0.715.

21.       Shamim Haidar, Sudipta Roy, Joyjeet Ghose. Software Simulation for Mechanical Properties of Aluminium MMC Foam. American Journal of Materials Synthesis and Processing. Vol. 1, No. 1, 2016, pp. 1-9. doi: 10.11648/j.ajmsp.20160101.11

22.       Md Obaidullah Ansari, Joyjeet Ghose, Rajshree Samantray. Automatic Mould width Adjustments System of Slab Caster during Casting. Discovery, 2015, 45(209), 127-131

23.       Haidar Shamim , Ghose, J and Sutradhar G., 2015, Synthesis and Compressive Characterization of Aluminium- SiCp Composite Foam by Stir - casting Technique Using  Dual Foaming Agent, International Journal of Advanced Information Science and Technology (IJAIST), ISSN:2319:2682, Vol.36, No.36, pp 1- 6, April  2015

24.       Md Obaidullah Ansari, Rajashree Samantray, Joyjeet Ghose, Neural Network Based Breakout Prediction System in Continuous Casting Shop, Applied Mechanics and Materials Vols. 813-814 (2015) pp 550-556, ISBN-13: 978-3-03835-664-6, doi:10.4028 /www.scientific.net /AMM.813-814.550

25. Prasad. K. D, Jha. S. K and Singh. R. K, “Implementation of Quality Improvement Tools in Brassware Manufacturing Unit to Improve Quality & Enhance Productivity”, International Journal of Applied Engineering Research, PP. 3580-3590, Volume 11, No. 5, March 2016. (ISSN: 0973-4562; Publisher: Research India Publications; Scopus; Impact Factor: 0.127).

 

26. Mohd. Hassan, Jha. S. K ,& Pandey. P, “ Metal Foam by Powder Metallurgy Route: A Review Paper”, Journal of Production Research and Management, PP. 9-15, Volume 6, Issue 1, Feb 2016. (ISSN: 2249-4766; Publisher: STM).

 

B. PUBLISHED IN INTERNATIONAL PROCEEDINGS

1.         Rajeev Kant, Vijay Pandey, L.N. Pattanaik, Lean, Agile & Leagile Supply Chain: A Comparative Study, Proceeding of 2nd International Conference on Advancement and recent innovations in mechanical, production and industrial engineering, Department of Mechanical Engineering, I.T.S. Engineering college, Greater Noida, ELK Asia Pacific Journals – Special Issue, Vol. 1, pp. 102-106, 15-16 April, 2016, ISBN: 978-81-930411-8-5.

2.         Mohd. Hassan, Sanjay Kumar Jha, Vijay Pandey, Analysis and Optimization of Parameters in Submerged Arc Welding Process using Taguchi Methods and Regression Analysis, Proceeding of 2nd International Conference on Advancement and recent innovations in mechanical, production and industrial engineering, Department of Mechanical Engineering, I.T.S. Engineering college, Greater Noida, ELK Asia Pacific Journals – Special Issue, Vol. 2, pp. 173-177, 15-16 April, 2016, ISBN: 978-81-930411-8-5.

3.         Mohd. Hassan, Sanjay Kumar Jha, Vijay Pandey, Submerged Arc Welding: A Review Paper, Proceeding of 2nd International Conference on Advancement and recent innovations in mechanical, production and industrial engineering, Department of Mechanical Engineering, I.T.S. Engineering college, Greater Noida, ELK Asia Pacific Journals – Special Issue, Vol. 2, pp. 102-106, 15-16 April, 2016, ISBN: 978-81-930411-8-5.

4.         L. N. Pattanaik, Rajeev Agrawal and Lakshmi Kumari, (2016), "Model of a fuzzy autonomation system for a steel wire roll mill", Proceeding of 3rd IEEE International Conference on Recent Advances in Information Technology, RAIT-2016, March 3-5, ISM Dhanbad. ISBN 978-1-4799-8578-4.

5.         Rajeev Kant, V. Pandey and L. N. Pattanaik (2015), "An NSGA-II based approach for optimization of reconfigurable cellular manufacturing system", presented in  International Conference on Computational Intelligence, 10-11 December, BIT-Mesra, Ranchi, India. 

6.         Rajeev Agrawal, Satyajit Mahato & Amit Rai Dixit , “Process excellence in IT sector in an emerging economic scenario” , 3rd IEEE International Conference on Recent Advances in Information Technology (RAIT-2016), during March 03-05, 2016, at Indian School of Mines, Dhanbad, India. ISBN: 978-1-4799-8579-1/16, IEEE Explore, DOI: 10.1109/RAIT.2016.7507973, Page(s):636 – 640,

7.         Nitesh Kumar, Binay Kumar, Lokesh C Pathak, (2015) “ Preparation and mechanical properties of sintered ZRB2-Graphite composites by Spark Plasma sintering (SPS) method” ELK Asia Pacific Journals-Special Issue 2015 ISBN- 978-81-930411-4-7.

 

C. PUBLISHED IN NATIONAL PROCEEDINGS

1.         L.N. Pattanaik, Rajeev Agrawal & Lakshmi Kumari,”Autonomation : Next Generation Automated Manufacturing in Rolling Mill”, National Seminar on Indigenous Development and Manufacturing of rolling Mills A Make in India Approach, Organised by Jharkhand state Centre ,Institution of Engineers (I) and MECON Limited,Ranchi,24-25th novemner,2015

 

Year 2014-15

 

1.         Arpita Roychoudhury, Vinay Sharma “Microwave Welding: A Comparative Analysis with Contemporary Methods of Welding Thermoplastic Based on Prioritization Matrix”, (October-2014) International Journal of Scientific & Engineering Research, Volume 5, Issue 10, pp 1199-1206

2.         Rajeshwari Chatterjee, Vinay Sharma, Samrat Mukherjee,and Surender Kumar, “Life Cycle Assessment of Bio-diesel Production—A Comparative Analysis” (April 2014) Springer Journal of Institutions of Engineers (India), Section C, Volume 95, Issue 2, pp 143-149, Print ISSN- 2250-0545

3.         Rajeshwari Chatterjee, Vinay Sharma, Samrat Mukherjee,and Surender Kumar, “Value stream mapping based on energy and cost system for biodiesel production”, Int. J. Sustainable Manufacturing, Inderscience Publisher (2014) Vol. 3, No. 2, pp95 115

4.         Rajeshwari Chatterjee, Vinay Sharma, Samrat Mukherjee, and Surender Kumar , “Quantitative assessment of biodiesel production: A model-based scenarios of sustainable development” Journal of Renewable and Sustainable Energy 6, 013129 (2014), American Institute of Physics

5.         Sujeet Kumar Mishra, Vinay Sharma, and Ashok Misra “Effect of rate of deformation on electromagnetic radiation during quasi-static compression of sintered aluminium preforms”, (March 2014), International Journal of Materials Research: Vol. 105, No. 3, pp. 265-271.

6.         Arpita Roychoudhury, B.K.Singh, Vinay Sharma, “Microwave Assisted Welding: A New Tool for Welding of Plastics” Kaav International Journal of Science, Engineering &Technology, (2014), Vol-1, Issue-1, pp35-45 (ISSN:2348-5477)

7.         Haidar Shamim , Ghose, J and Sutradhar G., 2015, Synthesis and Compressive Characterization of Aluminium- SiCp Composite Foam by Stir - casting Technique Using  Dual Foaming Agent , International Journal of Advanced Information Science and Technology (IJAIST), ISSN:2319:2682, Vol.36, No.36, pp 1- 6, April  2015

8.         L. N. Pattanaik and Gaurav Yadav, (2015), "Decision Support model for Automated Railway Level Crossing System using Fuzzy Logic Control", Procedia Computer Science (Elsevier), Vol 48, pp.73-76.(ISSN 1877-0509).

9.         Rajeev Kant, L. N. Pattanaik and V. Pandey (2015), "Heuristic for enabling lean characteristics in cellular manufacturing using reconfigurable machines" ELK Asia Pacific Journals Special Issue ISBN 978-81-930411-4-7.

10.       L. N. Pattanaik and Himanshu Agarwal (2015), "Magnetorheological Finishing (MRF) of a Freeform Non-magnetic Work Material", Journal for Manufacturing Science and Production, Vol 15 (ISSN 2191-0375) De Gruyter.

11.       Rajeev Kant, L. N. Pattanaik and V. Pandey (2015), "Framework for strategic implementation of cellular manufacturing in lean production environment", Journal of Manufacturing Technology Research, Vol 6, No. 3-4 (ISSN: 1943-8095) Scopus Indexed.

12.       Singh. A. K, Jha. S. K, and Prakash. A, “Adoption of Green Manufacturing (GM) in Selected Indian Industries”, International Journal of Applied Engineering Research, PP. 20383-20404, Volume 9, No. 23, December 2014. (ISSN: 0973-4562; Publisher: Research India Publications; Scopus; Impact Factor: 0.127).

13.       Prasad. K. D, Jha. S. K and Prakash. A, “Quality, Productivity and Business Performance in Home Based Brassware Manufacturing Units”, International Journal of Productivity and Performance Management, Vol: 64, issue: 2, Feb 2015. (http://dx.doi.org/10.1108/IJPPM-02-2014-0029; ISSN: 1741-0401; Publisher: Emerald).

14.       Om Prakash and Vijay Pandey, “Reducing the Bullwhip Effect in a Supply Chain Using Artificial Intelligence Technique,  International Journal of Production Research and Management, Volume 4, Issue 2, April, 2014, Pages 31-42, ISSN: 2249 – 4766.  1.     N. Muralidaran, S.C.Srivastava, N.L.Sarda, “Ever changing Business and Technology Landscape: Transformation Alternatives” published in the journal International Journal of Advances in Computational Engineering and Networking (IJACEN).

15.       N. Muralidaran, S.C.Srivastava, N.L.Sarda, “Choice of Design Techniques for Scaling Mission Critical High Volume Applications” presented in the proceedings of BUSTECH-2015”, March 22-27, 2015, NICE, France by ‘International Academy, Research, and Industry Association’ (IARIA) Included in the IARIA digital library, www.thinkmind.org.(Scopus Index Journal).

16.       N. Muralidaran, S.C.Srivastava, N.L.Sarda, "LFDS: Scalable and High Performance Logging for Mission critical Real Time   Applications", IJSEIA, June 2015. Australia (Scopus Index Journal).

17.       N. Muralidaran , S.C.Srivastava, N.L.Sarda, “Lean and efficient Business Tier for Performance Scaling”,International Journal of Computer Applications (0975 – 8887), DL, Volume 118 – No. 7, May 2015, New York, USA.

18.       N. Muralidaran, S.C.Srivastava, N.L.Sarda,“Implementation insight for High Performance Messaging Solution”, International Journal of Computer Sciences and Engineering, IJCSE, Volume-3, Issue-5, May 2015.

19.       Binay Kumar, S. C Srivastava, Surender Kumar,  (2014) “An adaptive factory scheduling controller using a hybrid AI based methodology”  An international journal, Manufacturing technology and research, Jan- July, 2014,    Vol-10   No. -1 Page 1-6 ISSN N0- 0973-0281.

20.       Nitesh Kumar, Binay Kumar, Lokesh C. Pathak ( 2015) “Preparation of and Mechanical properties of Sintered ZRB2- Graphite Composites by Spark Plasma Sintering (SPS) Method.” ELK Asia Pacific journals-Special Issue, ISBN : 978-81-930411-4-7

21.       R. K Singh, “A Hybrid Simulated Annealing Based Approach to Resolve TOC Product Mix Decision Problem”, International Advanced Research Journal in Science, Engineering and Technology, 2015, Vol. 2, Issue 4, pp 7-10.

22.       Kapil Deo Prasad, Sanjay Kumar Jha, Ritesh Kumar Singh, “Understanding quality in home based brassware manufacturing units in India”, ELK Asia Pacific Journals – Special Issue, 2015, pp 347-360, ISBN: 978-81-930411-4-7.

23.       S. K. Tiwari, R. K. Singh, S. C. Srivastava, “Assessing the Success of Six Sigma: An Empirical Study”, Asian Journal of Engineering and Applied Technology, 2015, Vol. 4, No. 1, pp 12-23.

24.       S. C. Srivastava, R. K. Singh, “Establishment of AGVs fleet size in FMS Using Petri-Net”, International Journal of Science, Engineering and Technology Research (IJSETR), 2014, Vol. 4, No. 4, ISSN: 1092-1097.

25.       S. K. Tiwari, R. K. Singh, S. C. Srivastava, “Optimization of Green Sand Casting Process Parameters for Enhancing Quality of Mild Steel Castings”, International Journal of Productivity and Quality Management, Inderscience, 2014, in press.

26. Prasad. K. D, Jha. S. K and Prakash. A, “Quality, Productivity and Business Performance in Home Based Brassware Manufacturing Units”, International Journal of Productivity and Performance Management,Vol: 64,PP. 270-287, issue: 2, Feb 2015. (http://dx.doi.org/10.1108/IJPPM-02-2014-0029; ISSN: 1741-0401; Publisher: Emerald).

27. Manoharan. P. K, Jha. S. K and Singh. B. K, “ Analysis Of Load And Gradient Effect On Hand Force Responses During Brick Carrying In A Brick Kiln”, International Journal of Applied Engineering Research, PP. 35332-35336, Volume 10, No. 15, August 2015. (ISSN: 0973-4562; Publisher: Research India Publications; Scopus; Impact Factor: 0.127).

 

 

B. PUBLISHED IN INTERNATIONAL PROCEEDINGS

1.         Arpita Roychoudhury, Vinay Sharma, B. K. Singh, “Microwave Assisted Welding: A New Tool for - Welding Of Thermoplastics”, International Conference on Industrial, Mechanical and Production Engineering: Advancements and Current Trends Department of Mechanical Engineering, MANIT, Bhopal November 27-29, 2014

2.         MD. Obeidullah Ansari, Joyjeet Ghose,  Rajshree Samantray, Automatic Mould width Adjustments System of Slab Caster during Casting. 2015. International Conference on Computing, Communication, Electrical, Electronics, Devices and Signal Processing (CCEEDS) and International Conference on Electrical, Electronics, Engineering Trends, Communication, Optimization and Sciences (EEECOS/E3COS) organized by Sri Sunflower College Of Engineering and Technology, Lankapalli (Challapalli)-521126, Krishna Dist., A.P., INDIA . 28th – 30th March. 2015. Pp 590-593.

3.         Rajeev Kant, L. N. Pattanaik and V. Pandey (2015), "Heuristic for enabling lean characteristics in cellular manufacturing using reconfigurable machines", International Conference on Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering (ARIMPIE-2015), April 10-11, 2015.

4.         L. N. Pattanaik and Gaurav Yadav, (2015), "Train Detection at Railway Level Crossing Using Background Subtraction Approach of Image Processing", International Conference on Signal processing, Control & Data Analytics (ICSCD-2015) Online, March 2015, San Diego, USA. (Best Paper Award)

5.         L. N. Pattanaik and Gaurav Yadav, (2014), "Decision Support model for Automated Railway Level Crossing System using Fuzzy Logic Control", International Conference on Intelligent Computing, Communication & Convergence (ICCC-Dec. 2014), Bhubaneswar, India.

6.         Rajeev Agrawal, Abhinav Goyal, Debjani Sambasivam, Arya K Bhattacharya, “Parallelization of Industrial Process Control Program based on the Technique of Differential Evolution using Multi-threading”, International Conference on Industrial Engineering and Engineering Management, 2014, organized by IEEE, ISBN-978-1-4799-6410-9

7.         Akshaye Malhotra, Vijay Pandey, S.K.Sahana, Somak Datta, “Ant colony optimization for scheduling of PCBs using single machine” Proc. Of the Int. Conf: ARIMPIE-2015, ELK Asia Pacific Journals – Special Issue, pp 441-447.

8.         S.K. Tiwari, R.K. Singh, S.C. Srivastava, "Optimization of green sand casting process parameters for enhancing quality of mild steel castings"Int. J. of Productivity and Quality Management Inder Science Publishers, Online July 2014

 

C. PUBLISHED IN NATIONAL PROCEEDINGS

1.         Rajshree Samantray, MD. Obeidullah Ansari, Joyjeet Ghose, Vijay Pandey, 2015 ATIG Welding of Austenitic Stainless Steel-A Review. National Welding Seminar, 22-24 Jan 2015, Jamshedpur, organised by Indian Institute of Welding.

2.         Rajeev Agrawal, Abhinav Goyal,  Mohammad Rumman, Shubham Mehra, “Supply Chain Optimization using Linear Programming Model and GIS to Reduce the Overall Freight Cost” International Conference on Industrial, Mechanical and Production Engineering: Advancement and Current Trends (IC IMPACT), November 27-29th, 2014.Maulana Azad National Institute of Technology, Bhopal – 462051, India ,Page:574-580,ISBN:978-93-84935-03-0.

3.         N. Muralidaran, S.C.Srivastava, N.L.Sarda, “Ever changing Business and Technology Landscape: Transformation Alternatives” presented in the proceedings of ‘ICEECMPE’, November 8th 2014, New Delhi.

 

 

 

 

 

YEAR 2013-14

 

1.         Pattanaik, L. N. (2013), "Applications of Soft computing tools in Metal forming: A state-of-art review", Journal of Machining and Forming Technologies, Vol 5, Issue 1-2, pp 29-44. (ISSN 1947-4369).

2.         Subodh Kumar, Vinay Sharma, Ajit Kumar Singh Choudhary, Somnath Chattopadhyaya, Sergej Hloch, ” Determination of layer thickness in direct metal deposition using dimensional analysis”, The International Journal of Advanced Manufacturing Technology, August 2013, Volume 67, Issue 9-12, pp 2681-2687

3.         Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, “Developing Green Supply Chain System for Indian Enterprises”, Int. J. Business Excellence, Vol. 6, No. 3, 2013, pp 270-291

4.         V N Sundharam, Vinay Sharma, I S Stephan Thangaiah , “An integration of BSC and AHP for sustainable growth of manufacturing industries” Inderscience,  International Journal. Business Excellence, Vol. 6, No. 1, 2013,pp77-92

5.         P. Prakash,  S. K. Jha “A Study Of Process Parameters Of Friction Stir Welded AA 6061 Aluminum Alloy”, International Journal of Innovative Research in Science, Engineering and Technology, PP. 2304-09, Volume 2, Issue 6, 2013.

6.         A. Singh, S. K. Jha “Green Manufacturing Practices In Brick Industries: A Case Study Using AHP”, International Journal of Innovative Research in Science, Engineering and Technology, PP. 2236-42, Volume 2, Issue 6, 2013.

7.         Subir kumar, and Dr. S.C. Srivastava," Designing a cellular Manufacturing System by GA Based Approach, An International Journal Manufacturing Technology and Research , July- December, 2013 Volume 9, No.2 ISSN No.: 0973-0281 pp.27-31.

8.         Pankaj Upadhyay, and Dr. S. C. Srivastava, "Improving a Flexible Manufacturing Scheduling using Genetic Algorithm", Journal of Academia and Industrial Research (JAIR), Volume 2, Issue 2 July 2013, ISSN: 2278-5213, pp.146-150.

9.         Binay Kumar,  Ritesh Kumar Singh, Surendra Kumar, Sanjeev K Tiwari “Design for variety in the initial  stages of product development”, Page No- 16-22, Manufacturing technology and Research, July-dec,2013,Vol 9 N0-2, ISSN No- 0973-0281                       .

10.       Saw, S. K., Purwar, R., Nandy, S., Ghose, J., and Sarkhel, G. 2013. Fabrication, characterization, and evaluation of Luffa cylindrica fiber reinforced epoxy composites,  BioRes. 8(4), 4805-4826, Nov 2013. ISSN: 1930-2126.

11. Singh. A. K, Jha. S. K, and Prakash. A, “Adoption of Green Manufacturing (GM) in Selected Indian Industries”, International Journal of Applied Engineering Research, PP. 20383-20404, Volume 9, No. 23, December 2014. (ISSN: 0973-4562; Publisher: Research India Publications; Scopus; Impact Factor: 0.127).

12. Jha. S. K, Singh. A. K and Prakash. A, “Understanding Green Manufacturing (GM)”, Journal of Production Research and Management, PP. 33-45, Volume 4, Issue 1, May 2014. (ISSN: 2249-4766; Publisher: STM).

13. Singh. A. K, Jha. S. K and Prakash. A, “Green Manufacturing (GM) Performance Measures: An Empirical Investigation from Indian MSMEs”, International Journal of Research in Advent Technology, PP. 51-65, Volume 2, No. 4, April 2014. (ISSN: 2321-9637; Impact Factor: 0.765).

 

B. Published in International Proceedings

1.         Manish Oraon, Vinay Sharma, “Effectiveness of tool profile in sheet metal incremental forming”, 5th International Scientific and Expert Conference of the  International TEAM Society, TEAM 2013, Vol.No.1, November 2013. pp 55-59, ISSN 1847-9065.

C. Published in National Proceedings

1.         N.K. Mahto, Vijay Pandey, and D. Mahto. " Automation of Mechanical Design Transformer", Proceeding of National Conference on Research And Innovations In Mechanical Engineering (RIME-2014), Department of Mechanical Engineering, Technocrats Institute of Technology & Science College, Bhopal, March 5-6, 2014.

2.         Rajashree samantray, khushboo Rani, and Vijay Pandey. " Agile, Lean & Leagile: Comparative Analysis", Proceeding of National Conference on Research And Innovations In Mechanical Engineering (RIME-2014), Department of Mechanical Engineering, Technocrats Institute of Technology & Science College, Bhopal, March 5-6, 2014.

 

YEAR 2012-13

 

A. Published in International Journals

  1. R.K. Singh and Lyes Benyoucef, Fuzzy Logic and Interval Arithmetic Based TOPSIS Method for Multi-criteria Reverse Auctions",  Service Science, Vol. 4, No. 2, 2012, pp. 1–17
  2.  R.K. Singh and Lyes Benyoucef, A consensus based group decision making methodology for strategic selection problems of supply chain coordination, Eng. Applications of Artificial Intelligence, Volume 26, Issue 1, January 2013, Pages 122–134.
  3. KD Prasad, SK Jha, RK Singh, Productivity Assessment of Utensils Manufacturing Unit: A Case Study, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), June 2013, Vol. 2, Issue 6.
  4. Pattanaik, L. N. (2013), "Applications of Soft computing tools in Metal forming: A state-of-art review", Journal of Machining and Forming Technologies, Vol 5, Issue 1-2, pp 29-44. (ISSN 1947-4369).
  5. Subodh Kumar, Vinay Sharma, Ajit Kumar Singh Choudhary, Somnath Chattopadhyaya, Sergej Hloch, ” Determination of layer thickness in direct metal deposition using dimensional analysis”, The International Journal of Advanced Manufacturing Technology, August 2013, Volume 67, Issue 9-12, pp 2681-2687
  6. Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, “Developing Green Supply Chain System for Indian Enterprises”, Int. J. Business Excellence, Vol. 6, No. 3, 2013, pp 270-291
  7. V N Sundharam, Vinay Sharma, I S Stephan Thangaiah , “An integration of BSC and AHP for sustainable growth of manufacturing industries” Inderscience,  International Journal. Business Excellence, Vol. 6, No. 1, 2013,pp77-92
  8. Rajeshwari Chatterjee, Vinay Sharma, Surender Kumar, “Life cycle assessment of energy performance of biodiesel produced fromJatropha curcas”J. Renewable Sustainable Energy, American Institute of Physics,
  9. Vinay Sharma, Sanjeev Kumar, S. Chattopadhyaya,“A Comparative Analysis of Internal Environmental Management Performance Between Indian Small and Medium Sized Enterprises for Implementation of Sustainable Supply Chain, International Journal of Advanced Manufacturing Systems, Vol 14, issue 2, 2002, pp 49-61
  10. Rajeshwari Chatterjee, Vinay Sharma, Surender Kumar, “Eco-efficiency from cradle to grave design systembased on atmospheric conditions in the biodieselmanufacturing sector produced from Jatropha curcasfor sustainable cleaner production”International Journal of Sustainable Manufacturing, Inderscience, Vol. 2, No. 4, 2012, pp- 261-275
  11. Vinay Sharma, J. Ghose , S. Kumar “Compressive and Acoustic Behavioural Analysis of Al-MMCFoam for Industrial Applications”, Springer, Journal of The Institution of Engineers (India): Series C , 2012) volume 93(1) pp. 33–40
  12. J. Ghose , Vinay Sharma, S. Kumar , “Acoustic Absorption Characteristics of Closed Cell Aluminium Foam”Applied Mechanics and Materials, Trans Tech Publications, Vols. 110-116 (2012) pp. 1145-1149
  13. Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma , “Sustainable Supply Chain Management: A Case Study From IndianAutomotive Industry”, Advanced Materials Research Vols. Trans Tech Publications, 472-475 (2012) pp 3359-3370
  14. Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, “Sustainable supply chain: vendor and customer participation” ,International Journal of Modelling in Operations Management, Vol. 2, No. 4, 2012, pp 360, 377
  15. Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, “Green Supply Chain Management: A Case Study from Indian Electrical and Electronics Industry”, International Journal of Soft Computing and Engineering (IJSCE) ISSN: 2231-2307, Volume-1, Issue-6, January 2012, pp 276, 281.
  16. Anand Prakash, S. K. Jha “Scenario Planning for Service Quality: A Monte Carlo simulation study”, International Journal of Strategy and Management, Emerald publication, PP. 331-352, Volume 5, Issue 3, 2012.
  17. P. Prakash,  S. K. Jha “A Study Of Process Parameters Of Friction Stir Welded AA 6061 Aluminum Alloy”, International Journal of Innovative Research in Science, Engineering and Technology, PP. 2304-09, Volume 2, Issue 6, 2013.
  18. A. Singh, S. K. Jha “Green Manufacturing Practices In Brick Industries: A Case Study Using AHP”, International Journal of Innovative Research in Science, Engineering and Technology, PP. 2236-42, Volume 2, Issue 6, 2013.
  19. Rajeev Agrawal, L.N. Pattanaik And S Kumar, “Scheduling of a Flexible Job-Shop using a Multi-objective Genetic Algorithm”,(2012) International Journal of Advances in Management Research (Emerald) ISSN:0972-7981,Vol.9 Iss:2,page 178-188,IF-0.712
  20. Rajeev Agrawal, Koushik Kabiraj, Ravi Singh “Modeling a controller for an Articulated Robotic Arm”, Intelligent Control & Automation, Scientific Research Publishing Inc. USA, Vol. 3 No. 3, August 2012.,Impact Factor:028 (Statistics from Google Scholar).
  21. Somak Datta, D.K. Pratihar, P.P. Bandyopadhyay, Modeling of input–output relationships for a plasma spray coating process using soft computing tools, Applied Soft Computing, Vol. 12, pp 3356 -3368, 2012.
  22. Somak Datta, D.K. Pratihar, P.P. Bandyopadhyay, Hierarchical adaptive neuro-fuzzy inference systems trained by evolutionary algorithms to model plasma spray coating process, Journal of Intelligent & Fuzzy Systems, Vol. 24, pp.355-362, 2013.
  23. Pankaj Upadhyay, and Dr. S. C. Srivastava, "Priority Rule Based Genetic Algorithm Approach for Non Polynomial Complete Job Shop Scheduling Problem", An International Journal Manufacturing Technology and Research ,January- June, 2013 Volume 8, No.1 ISSN No.: 0973-0281 pp.73-78.
  24. Subir kumar, and Dr. S.C. Srivastava," Designing a cellular Manufacturing System by GA Based Approach, An International Journal Manufacturing Technology and Research , July- December, 2013 Volume 9, No.2 ISSN No.: 0973-0281 pp.27-31.
  25. Pankaj Upadhyay, and Dr. S. C. Srivastava, "Improving a Flexible Manufacturing Scheduling using Genetic Algorithm", Journal of Academia and Industrial Research (JAIR), Volume 2, Issue 2 July 2013, ISSN: 2278-5213, pp.146-150.
  26. Binay Kumar,  Ritesh Kumar Singh, Surendra Kumar, Sanjeev K Tiwari “Design for variety in the initial  stages of product development”, Page No- 16-22, Manufacturing technology and Research, July-dec,2013,Vol 9 N0-2, ISSN No- 0973-0281                       .
  27. Saw, S. K., Purwar, R., Nandy, S., Ghose, J., and Sarkhel, G. 2013. Fabrication, characterization, and evaluation of Luffa cylindrica fiber reinforced epoxy composites,  BioRes. 8(4), 4805-4826, Nov 2013. ISSN: 1930-2126.
  28. Singh. A. K, Shukla. S. S and Jha. S. K, “Green Manufacturing Practices In Brick Industries: A Case Study Using AHP”, International Journal of Innovative Research in Science, Engineering and Technology, PP. 2236-42, Volume 2, Issue 6, 2013. (ISSN: 2319-8753; Impact Factor: 1.672).

 

  1. Prakash. P, Jha. S. K and Lal. S. P, “A Study Of Process Parameters Of Friction Stir Welded AA 6061 Aluminum Alloy”, International Journal of Innovative Research in Science, Engineering and Technology, PP. 2304-09, Volume 2, Issue 6, 2013. (ISSN: 2319-8753; Impact Factor: 1.672).

 

  1. Prasad. K. D, Jha. S. K and Singh. R. K, “Productivity Assessment Of Utensils Manufacturing Unit: A Case Study”, International Journal of Innovative Research in Science, Engineering and Technology, PP. 2360-69, Volume 2, Issue 6, 2013. (ISSN: 2319-8753; Impact Factor: 1.672).  

 

B. Published in International Proceedings

  1. Manish Oraon, Vinay Sharma, “Effectiveness of tool profile in sheet metal incremental forming”, 5th International Scientific and Expert Conference of the  International TEAM Society, TEAM 2013, Vol.No.1, November 2013. pp 55-59, ISSN 1847-9065.
  2. Pattanaik, L. N. and B. K. Jena (2012), "Optimization of Aluminum die casting process using ANN",4th International and 25th AIMTDR conference, JU, Kolkata.
  3. Arpith. S, Meghla Clara Costa , Rajeev Agrawal, “Manufacturing Management Model To Optimize Production Technologies”, 3rd International Conference on  Production and Industrial Engineering (CPIE 2013)  organized by Department of Industrial and Production Engineering  Dr B R Ambedkar National Institute Of Technology, Jalandhar, India, March 29-31, 2013,Page 32-36.
  4. Ankit Tibrewal, Aditya Prakash & Rajeev Agrawal, “Modeling of Solar Panels Automatic Tracking System Based on Delta PLC”, 3rd International Conference on  Production and Industrial Engineering (CPIE 2013)  organized by Department of Industrial and Production Engineering  Dr B R Ambedkar National Institute Of Technology, Jalandhar, India, March 29-31, 2013,
  5. Naval Kishore Gupta & Rajeev Agrawal, “A Framework For Supply Chain Integration And E-manufacturing” , 1st International Conference on Best Practices in Supply Chain Management BPSCM-2012,Organised by ITER (Faculty of engineering and Technology), Shikhsha ‘O’ Anusandhhan    University,Bhubaneswar,Odissa,22-23rd Nov ,2012.

 

C. Published in National Proceedings

  1. Rajeshwari Chatterjee and Vinay Sharma, “ Evaluation of Environmental Impact of Biodiesel produced from Jatropha Curcas by life cycle assessment and eco-efficiency for sustainable cleaner production”, 9th All India Peoples Technology Congress, organised by Forum of Scientists, Engineers & Technologists, 8-9 February, 2013     
  2. Arpita Roychoudhury, B. K. Singh, Vinay Sharma, “Microwave Assisted Welding: A New Tool for Welding of Plastics”27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing - Vision 2020, 25th – 26th May, 2012, BIT Mesra Ranchi , India
  3. Manish Oraon, Vinay Sharma and Surender Kumar, “Effect of tool geometry in sheet metal incremental forming”27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing - Vision 2020, 25th – 26th May, 2012, BIT Mesra Ranchi , India
  4. Aniruddha Ghosh, S. Chattopadhyaya, Sergej Hloch and Vinay Sharma , “Numerical Simulation of Transient Temperature during Submerged Arc Welding Process” 27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing - Vision 2020, 25th – 26th May, 2012, BIT Mesra Ranchi , India
  5. Sujeet Kumar Mishra, Vinay Sharma and Ashok Misra, “ Some Studies on the Electromagnetic radiation under compression in sintered Aluminium Preforms” 27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing - Vision 2020, 25th – 26th May, 2012, BIT Mesra Ranchi , India
  6. Arpith. S, Partho Banerjee, Neha Verma, Ankita Chakrabortty, and Vijay Pandey. " Recent trends in manufacturing", Proceeding of National Conference on Emerging trends in mechanical engineering, T.I.T., Bhopal, November 29-30, 2012.
  7. Ankita Chakrabortty, Neha Verma, Partho Banerjee, Arpith. S, and Vijay Pandey. " Micromachining and actuation control of micro-edm",             Proceeding of National Conference on Emerging trends in mechanical engineering, T.I.T., Bhopal, November 29-30, 2012.
  8. Partho Banerjee,Arpith S.,Ankita Chakrabortty,NehaVerma, and Vijay Pandey. " Just In Time: A model for better Productivity", Proceeding of National Conference on Emerging trends in mechanical engineering, T.I.T., Bhopal, November 29-30, 2012.
  9. NehaVerma, Partho Banerjee, Arpith S.,Ankita Chakrabortty, and Vijay Pandey. "Precision forming approach in vehicle assemblies", Proceeding of National Conference on Emerging trends in mechanical engineering, T.I.T., Bhopal, November 29-30, 2012.
  10. Navaneeta Mahanty and Vijay Pandey. "Green supply chain management for developing countries like India: A review", Proceeding of All India Seminar on Technology Solution in Manufacturing,  Institution of Engineers (I), Jharhkhand State Centre, IE(I), B.I.T., Mesra, Ranchi, March 1-2, 2013.
  11. Asifa Imam, Ankita Chakrabortty, and Vijay Pandey. "Filament winding: A technology for manufacturing of composites", Proceeding of All India Seminar on Technology Solution in Manufacturing,  Institution of Engineers (I), Jharhkhand State Centre, IE(I), B.I.T., Mesra, Ranchi, March 1-2, 2013.
  12.  Utkarsh, Sushant Kumar Thakur, amd Vijay Pandey. "Warehouse design and optimization by order picking: a literature overview", Proceeding of All India Seminar on Technology Solution in Manufacturing,  Institution of Engineers (I), Jharhkhand State Centre, IE(I), B.I.T., Mesra, Ranchi, March 1-2, 2013.
  13. Prashant Kumar, S.K.Jha and S.C.Srivastava, “ Design, development and analysis of the friction stir welding process” e-Proceeding of All India Seminar on Technology Solution in Manufacturing, B.I.T Mesra, Ranchi, 01st -02nd  march -2013.
  14. T.K.Baug, L. N. pattanaik & S.K.Jha, “ Selection of lean tools for achieving sustainability in manufacturing” e-Proceeding of All India Seminar on Technology Solution in Manufacturing, B.I.T Mesra, Ranchi, 01st -02nd  march -2013.
  15. A.K.Singh and S.K.Jha, “ Sustainability assessment using Analytical Hierarchy Process: A case study” e-Proceeding of All India Seminar on Technology Solution in Manufacturing, B.I.T Mesra, Ranchi, 01st -02nd  march -2013.
  16. Prashant Prakash, Sanjay Kumar Jha & S. P. Lal, “Investigations of friction stir welding of metallic materials.” E-Proceeding of International conclave on Innovation in Engineering and Management, BIT Mesra, Patna Centre, 22nd -23rd February -2013.       
  17. Rajeev Agrawal ,Amit Kumar, Om Prakash ,Design of Supply Chain Model for E-Manufacturing Framework, , All India Seminar On “Technology Solution In Manufacturing”, under the aegis of IE(India) organized   by   IE(I), JSC in association with Department of Production Engineering, BIT, Mesra, Ranchi will be held during 01st & 02ndMarch, 2013.
  18. Subhash Kumar, Rajeev Agrawal,  Simulation of Robotic spray paint application for offline programming , All India Seminar On “Technology Solution In Manufacturing”, under the aegis of IE(India) organized   by   IE(I), JSC in association with Department of Production Engineering, BIT, Mesra, Ranchi will be held during 01st & 02ndMarch, 2013.
  19. Rajeev Agrawal, Sudhir Kumar,Srikrishna L. Purohit, L.N Pattanaik, Improving Machinability of High Carbon Steel through Heat Treatment Processes , All India Seminar On “Technology Solution In Manufacturing”, under the aegis of IE(India) organized   by   IE(I), JSC in association with Department of Production Engineering, BIT, Mesra, Ranchi will be held during 01st & 02ndMarch, 2013.
  20. Ankita Chakrabortty, Naval Kishor Gupta, Rajeev Agrawal, “Optimum Resources Utilization to Overcome Energy Crisis and Pollution Control”, National Conference on Sustainable Development and Global Competitiveness, Organised by  Environmental Science & Engineering Group, BIT, Mesra, Ranchi , Dec.4-5,2012.
  21. Partho Banerjee & Rajeev Agrawal, “An Industrial Model for Environmental Sustainability   – A Primer”, National Conference on Sustainable Development and Global Competitiveness Environmental Science & Engineering Group, BIT, Mesra, Ranchi , Dec.4-5,2012.
  22. Arpith S. & Rajeev Agrawal, “Environmental Management System in Manufacturing Industries” , National Conference on Sustainable Development and Global Competitiveness Environmental Science & Engineering Group, BIT, Mesra, Ranchi , Dec.4-5,2012.
  23. Himanshu Agarwal & Rajeev Agrawal, “Making Every Village a Knowledge Centre for Sustainable Development,” National Conference on Sustainable Development and Global Competitiveness Environmental Science & Engineering Group, BIT, Mesra, Ranchi , Dec.4-5,2012.
  24. Pattanaik, L. N., Sudhir Kumar and S. Purohit, "Improving Machinability of High Carbon Steel Through Heat Treatment Processes", Proceedings of  All India Seminar on Technology Solution in Manufacturing, March 1–2, 2013, Ranchi.
  25. Anurag Anand and Pattanaik, L. N., "Development of a Need Assessment Model For Reconfigurable Manufacturing System", Proceedings of All India Seminar on Technology Solution in Manufacturing, March 1–2, 2013, Ranchi.

 

YEAR 2011-12

 

A. Published in International Journals

1.         Brijesh Ainapur, Ritesh Singh & P.R.Vittal, TOC Approach for Supply Chain Performance Enhancement, International Journal of Business Research and Management (IJBRM), Volume 2, Issue 4: 2011, 163-178.

2.         R.K. Singh and Lyes Benyoucef, Fuzzy Logic and Interval Arithmetic Based TOPSIS Method for Multi-criteria Reverse Auctions",  Service Science, Vol. 4, No. 2, June 2012, pp. 1–17

3.         R.K. Singh and Lyes Benyoucef,, A consensus based group decision making methodology for strategic selection problems of supply chain coordination, Eng. Applications of Artificial Intelligence, publish on line (http://dx.doi.org/10.1016/j.engappai.2012.03.013).

4.         Brijesh Ainapur, Ritesh Singh & P.R.Vittal, Strategic Study on Enhancement of Supply Chain Performance, International Journal of Business Insights and Transformation, Volume 5, Issue 1, Oct 11 – March 12.

5.         L.N. Pattanaik and V. Kumar, “Product family formation for reconfigurable manufacturing using a bi-criterion evolutionary algorithm”, International Journal of Industrial Engineering- Theory, Application and Practice, Vol 18(9), 2011, pp. 493-505.

6.         V. Sharma, J. Ghose & S. Kumar, “Compressive and Acoustic Behavioural Analysis of Al-MMC Foam for industrial Applications” Journal of The Institution of Engineers (India): Series C (January–March 2012) pp 33–40

7.         Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, “Environmental Management for small Sized Indian Enterprises in Manufacturing” Manufacturing Engineering, Vol X, No2, 2011, pp54-56

8.         Joyjeet Ghose, Vinay Sharma, Surender Kumar. “Acoustic Absorption Characteristics of Closed Cell Aluminium Foam” Applied Mechanics and Materials Vols. 110-116 (2012) pp 1145-1149

9.         Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, “Sustainable Supply Chain Management: A Case Study From Indian Automotive Industry” Advanced Materials Research Vols. 472-475 (2012) pp 3359-3370

10.       Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, “Green Supply Chain And Operations Practice and Performance Of Small Scale Rubber Product Manufacturing Unit” IJETSE International Journal of Emerging Technologies in Sciences and Engineering, Vol. 4, No. 2, July 2011, pp 1-8

11.       Joyjeet Ghose, Vinay Sharma, Nitin Kumar, Ajay Krishnamurthy, Surender Kumar, Zlatko Botak, “Taguchi-Fuzzy Based Mapping of EDM-Machinability of Aluminium Foam” Tehnicki vjesnik 18, 4(2011), pp 595-600

12. Prakash. A , Jha. S. K and Mohanty. R. P, “Scenario Planning for Service Quality: A Monte Carlo simulation study”, International Journal of Strategy and Management, PP. 331-352, Volume 5, Issue 3, 2012.( http://dx.doi.org/10.1108/17554251211247599; ISSN: 1755-425X; Publisher: Emerald).

 

13. Manoharan. P. K, Jha. S. K and Singh. B. K, “Modeling the risk factors in ergonomic processes using fuzzy logic”, LNEE, Computer, Informatics, Cybernetics and Applications, PP.827-832, Volume 107, Part-I, 2012. (doi:10.1007/978-94-007-1839-5-89  ; Publisher: Springer).

14. Suman. S and Jha. S. K, “Knowledge based decision support system in steel industries”, International Journal of Manufacturing Technology and Research, PP. 16-21, Volume 8, No 1, 2012.(ISSN: 0973-0281).

15. Suman. S, Singh. R. K, Jha. S. K and Jha. V. K, “A Multi Objective DSS for Optimization of Ferro- Alloy Cost Using LIPSOL”, International Journal of Technical Research (IJTR), PP. 26-35, Volume 1, No 1, 2012. (ISSN: 2278-5787).

16. Pathak. P, Jha. S.K and Singh. A.P, “Tribological Approach for Improvement in Productivity and Quality of Flat Rolled Steel Products: A Review”, International Journal of Applied Science & Technology Research Excellence, PP. 196-202, Volume 2, Issue 2, 2012.(ISSN: 2250-2726).

17. Manoharan. P. K, Jha. S. K and Singh. B. K, “Ergonomics investigation using Psycho-physiological study for Brick kilns’ In Jharkhand”, International Journal of Environmental Sciences   , PP. 1484-1491, Volume 2, No 3, 2012.( DOI: 10.6088/ijes.00202030033; ISSN: 0976-4402; Publisher: IPA).

 

B. Papers/Abstracts in Conference Proceedings

1.         Ishwar Bhiradi, Anamika Rai, Prof. Rajeev Agrawal, “Implementation of Advanced Planning and Scheduling Framework for small Scale Industry”, ICAM-2011 “Agile Manufacturing Systems Approach for Enhancing Agility of Organizations and Processes”, Organised by Dayalbagh Educational Institute (India) durin December 18-20, 2011, Page 168-174.

2.         Viraj Shah, Sudhir Kumar, Rajeev Agarwal, L N Pattnaik, Fuzzy Model For the Austenite Grain Refinement In the Plate Rolling Low Carbon Steel”, ICAM-2011 “Agile Manufacturing Systems Approach for Enhancing Agility of Organizations and Processes”, Organised by Dayalbagh Educational Institute (India) during December 18-20,2011, Page 641-646.

3.         Viraj Shah ;Sudhir Kumar, Rajeev Agrawal, L.N Pattanaik “Fuzzy Model For Optimum Pass Schedule In Plate Rolling Of Low Carbon Steel”, 27th National Convention of Production Engineers National Seminar on “Advancements in Manufacturing - Vision 2020” ,organized   by   IE(I), JSC in association with Birla Institute of Technology, Mesra, Ranchi at the Department of Production Engineering, Birla   Institute   of Technology, Mesra, Ranchi during  May   25 – 26, 2012

4.         Prashant Kumar, Ishwar Bhiradi, Rajeev Agrawal “Finite Element Analysis On The Mechanical Properties Of Forged A356 Alloy”, 27th National Convention of Production Engineers National Seminar on “Advancements in Manufacturing - Vision 2020” ,organized   by   IE(I), JSC in association with Birla Institute of Technology, Mesra, Ranchi at the Department of Production Engineering, Birla   Institute   of Technology, Mesra, Ranchi during  May   25 – 26, 2012

5.         Subhash Kumar, Rajeev Agrawal “Modeling of The Micro-thermal Actuators and Its Deformation”, 27th National Convention of Production Engineers National Seminar on “Advancements in Manufacturing - Vision 2020” ,organized   by   IE(I), JSC in association with Birla Institute of Technology, Mesra, Ranchi at the Department of Production Engineering, Birla   Institute   of Technology, Mesra, Ranchi during  May   25 – 26, 2012

6.         Rajeev Agrawal, Koushik Kabiraj, Gagan Kishore Nand “A simplified approach to control a robotic arm using a training robot”, 27th National Convention of Production Engineers National Seminar on “Advancements in Manufacturing - Vision 2020” ,organized   by   IE(I), JSC in association with Birla Institute of Technology, Mesra, Ranchi at the Department of Production Engineering, Birla   Institute   of Technology, Mesra, Ranchi during  May   25 – 26, 2012

7.         Anamika Rai, Rajeev Agrawal “Development of an educational plan to assess student skill level: a review”, National Seminar on Academic Institutes-Industries Interaction, Jointly Organised by CIT, Ranchi and by Institution Of Engineers (India), Jharkhand State Chapter, 24th-25th Dec, 2011, Page 328-332.

8.         Rajeev Agrawal, Siddharth G. Menon “Design, Simulation and Control of sophisticated hexapod robot”, All India Seminar on Recent Advancements in Robotics & Mechatronics, Organised by Mechanical Engineering department ,The Institution of Engineers(India) in association with Bengal Engineering & Science University (BESU),Shibpur,Howrah, August 19-20,2011.

9.         Anurag Bodra, Anamika Rai, Vijay Pandey and Prem Prakash Prasad."Artificial Intelligence tools in Manufacturing", Proceeding of 27th National Convention of Production Engineers and National Seminar on Advancements in Manufacturing - Vision 2020, Institution of Engineers (I), Jharhkhand State Centre, IE(I), B.I.T., Mesra, Ranchi, May   25 – 26, 2012.

10.       Anamika Rai, Mayank Pawar, Vijay Pandey and Prem Prakash Prasad." Printed Circuit Board Assembly Problem: A Review", Proceeding of 27th National Convention of Production Engineers and National Seminar on Advancements in Manufacturing - Vision 2020, Institution of Engineers (I), Jharhkhand State Centre, IE(I), B.I.T., Mesra, Ranchi, May   25 – 26, 2012.

 

YEAR 2010-11

 

A. Published in International Journals

1.         Vijay Pandey, “Standard for Exchange of Products (STEP) based feature Recognition System for Prismatic Parts”, International Journal of Production Research & Management, Volume 1, Issue 1, April, 2011, Pages 19-37.

2.         Vinay Sharma, Somnath Chattopadhyaya, Sergej Hloch, “Multi response optimization of process parameters based on Taguchi—Fuzzy model for coal cutting by water jet technology”, International Journal of Advanced Manufacturing Technology, Springer- Verleg, (March 2011)  Published online,

3.         Vinay Sharma, Minakshi Kumari, Santosh Kumar, “Reliability Improvement of Modern Aircraft Engine through Failure Modes and Effects Analysis of Rotor Support System”, Emerald, International Journal of Quality & Reliability Management, Vol 28, Issue 6 

4.         V N Sundharam, Vinay Sharma, I S Stephan Thangaiah “Reengineering of Manufacturing Industries Operation using Balanced Scorecard - A Case Study” International Journal of Advanced Operations Management (IJAOM), Inderscience Publication ,accepted for publication in Special Issue

5.         Joyjeet Ghose, Vinay Sharma, Surender Kumar, “Compressive Behavioural Analysis of Al-MMC Foam”, International Journal of Industrial & Production Engineering & Technology,(2011) Volume 1, Number 1, pp35-43

6.         Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma “Environmental Management for small Sized Indian Enterprises in Manufacturing”, Annals of Faculty Engineering Hunedoara – International Journal of Engineering - Journal of Manufacturing Engineering (ISSN 1335-7972), (2011), no 2, Vol X, , pp 54-56

7.         Rajeshwari Chatterjee, Vinay Sharma, Surender Kumar “Resource Utilization and Environmental Impact of Biodiesel Produced from Jatropa Curcas”, International Journal of Manufacturing Technology and Research’ ‘Jan-June 2011,(ISSN: 0973-0281), Vol. 7, No. 1,pp 81-91

8.         Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma “Performance of Sustainable Logistic Practices of SMES in Delhi” International Journal of Research In Computer Application & Management (ISSN 2231-1009), 2011, Volume No: 1 Issue No. 3 (May) pp 85-89

9.         Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, “ Performance of Eco Procurement Practices and Green Supply chain Performance of SMEs in Delhi, B Shastra- International Journal of Management” (ISSN 2229-2010), March  2011, Vol 2 Issue 1, pp 43-46

10.       Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, “Approaching Green Supply Chain Management Through Reusing & Recyclable Packing Method”, International Journal of Retailing and Marketing, (ISSN 0976-318X), October 2010, special issue, pp 98-102

11.       Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, “Role of Environmental conscious design and manufacturing for implementation of green supply chain” International Journal of Management Research and Technology, (ISSN 0974-3502) serial publications, 2010, vol 4 no 2, pp533-539

12.       Rajeev Agrawal, S.Kumar, Design Issues for Automatic Guided Vehicles In Material Handling Operations” in International Journal of Manufacturing Technology and Research, Vol. 6/No 2  (2010)  55-60.

13.       M K Pandey, R K Singh, S Venkataramanaiah, and M K Tiwari, Sequential metamodelling application to improve porthole die design, J. Engineering Manufacture, 2010, Vol. 224 (2), 279-294.

14.       R.K. Singh and Lyes Benyoucef, A fuzzy TOPSIS based approach for e-sourcing, Eng. Applications of Artificial Intelligence,   2011, 24, 437–448.

15.       Anoop Verma, Nishikant Mishra and R. K. Singh, Effect of machine flexibility on the performance of FMS subjected to frequent breakdowns, Int. J. Services Operations and Informatics, 2011,  Vol. 6, Nos. 1/2, 45-70.

16.       R.K. Singh and Lyes Benyoucef, A Fuzzy Logic Based Approach for Resolving Multi-Issue Reverse Auction Problem of e-procurement, International Journal of Manufacturing Technology and Research, 2010, Vol. 6/No 2, 42-50.

17. Prakash. A, Jha. S. K and Kallurkar. S. P, “Attitudes of Indian Towards service Quality for Life Insurance in India”, International Journal of Research in Computer Application and Management, VOL. 1, ISSUE NO. 9, PP -57-63, Nov 2011. (ISSN: 2231-1009)

18.Jha. V. K, Jha. S. K and Prakash. P, “Data Mining Application Using Decision Tree and ANN For Predicting Surface Roughness Of End Milling Manufacturing Process”, International Journal of Computer Science Engineering and Information Technology Research, VOLUME NO. 1, ISSUE NO. 2, PP -61-68, 2011.(ISSN, Print: 2249-6831; Impact Factor:6.87; Publisher: Transstellar)

19. Pathak. P, Jha. S. K, Sengupta. P. P and Singh. A. P, “Development Of Superior Quality Rolling Oils For Performance Improvement Of 5-STAND TANDEM COLD MILL”, THE ANNALS OF “DUNAREA DE JOS UNIVERSITY OF GALATI FASCICLE VIII, TRIBOLOGY,Vol. XVII, Issue 2,PP. 25-31, 2011.(ISSN: 1221-4590).

20. Pathak. P, Jha. S. K, Sengupta. P. P and Singh. A. P, “Investigations into High speed Rolling of Thin Gauge Strips for Improving their Rolling Rate at 5-STAND TANDEM COLD MILL”, Journal of STEEL INDIA, PP. 181-188, Volume 34, No. 2, SEP 2011.(ISSN: 0970-1311).

B. Published in National Journal

 

1.         V N Sundharam, Vinay Sharma, I S Stephan Thangaiah, “Business Process Reengineering and Value Chain Analysis” Crescent Journal of Business, (ISSN 2231-2994) 2011,  vol1, No.1, pp 74-87

2.         Joyjeet Ghose, Vinay Sharma, Surender Kumar, “Al-MMC FOAM: Synthesis and Characterisation”, STM Journal, Journal of Materials & Metallurgical Engineering, February, 2011, Volume 1, Issue 1, pp 1-10

3.         Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, “What role can green supply chain management play in mitigating global warming”, Journal of chemistry in Asia ( ISSN 0975-9468)  Sept 2010, vol 1,  no2 &3, pp179- 192

4.         Joyjeet Ghose, Vinay Sharma, Surender Kumar, “Manufacturing and Characterisation of AL-MMC Foam for Industrial Applications. Technoinsight (ISSN 0975-4946), 2010. Vol II, No. 1, A national journal published by Rajiv Gandhi Forum, Orissa.

5.         S. Chattopadhyaya, P. Sehgal, Vinay Sharma, Aniruddha Ghosh, “Industrially robust ND: YAG lasers for cutting, drilling and welding steels, OEM Update for efficient manufacturing” Welding Special ,B2B Purchase, National Magazine for Project Procurement, Vol. 1 , Issue 09, pp. 40-42. Feb. 2010,

6.         Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma “Green  Manufacturing;: Green Value Chain Practices for the Indian Enterprises”, ISST journal of Mechanical Engineering,(ISSN-0976-7371) Vol. 1 Jan-June 2010 pp73-75

7.         Gopal Verma,  Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma “Energy Management In Small & Medium Indian Enterprises: An Approach”, , ISST Journal of Electrical & Electronics Engineering Vol. 1 No.1, (January - June 2010), p.p. 11-15

C. Papers/Abstracts in Conference Proceedings Reference to Proceedings:

 

Papers Published in Conferences (International):

1.         Vinay Sharma, Somnath Chattopadhyaya, Sergej Hloch, “ Multi response optimization of cutting coal through water jet”, International Seminar on Recent Advances in Geosciences,  ISM Dhanbad, January 11-13 2011, pp- 208-216, ISBN NO- 1-30-31808-39

2.         Joyjeet Ghose, Vinay Sharma and Surendra Kumar, “Measurement of interfacial frictional forces during compressive deformation of Al-MMC foam” International Conference on Industrial Tribology 2010 02-04 Dec, 2010, RDCIS, SAIL, Ranchi

3.         Manish Oraon, Vinay Sharma,” Sheet Metal Micro Forming: Future Research Potentials” , Proceeding  of International conference on Advance Mechanical Engineering (AMAE) 2010, Dec 21-22 2010, Trivandrum

4.         Joyjeet Ghose, Vinay Sharma and Surendra Kumar, Morphological Characterization of Aluminium Foam by Image Processing Technique, 3rd International & 24th AIMTDR (All India Manufacturing Technology, Design and Research) Conference A.U. College of Engineering (A), Andhra University, Visakhapatnam,, December 13-15, 2010.

5.         V N Sundharam, Vinay  Sharma, I S Stephan Thangaiah “Quality Functional Deployment in Liquor Manufacturing Industry – A case Study”, XIV Annual International Conference of the Society of Operations Management Management SOM 2010,  organized by the National Institute of Industrial Engineering (NITIE), Mumbai, in partnership with The School of Managements (The University of Texas at DALLAS, Shailesh J Mehta School of Management IIT Bombay, Insead Social Innovation Centre France and S.P.Jain Institute of Management & Research SPJIM) 17-19, December 2010.

6.         J Ghose, Vinay Sharma, S. Kumar, “Multi Functional Behavioural Analysis Of AL-SIC Metal Matrix Composite Foam Produced By (TiH2-CaCO3) Dual Foaming Agent”, Proceedings of the ASME 2010 International Manufacturing Science and Engineering Conference MSEC2010, Bayfront Convention Center, Erie, Pennsylvania, USA, October 12-15, 2010

7.         Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, “Environmental Management for Small Sized Indian Enterprises in Manufacturing” Advanced topics in Manufacturing and Management, University of Czestochowa, faculty of Management, Poland,  2010, (ISBN- 978-83-61118-30-5), pp-103-106

8.         Rajeev Agrawal, L.N.Pattnaik, S.Kumar, Scheduling of a Flexible Job-Shop using a Multi Objective Genetic Algorithm, 3rd International & 24th All India Manufacturing Technology Design & Research - 2010  (AIMTDR – 2010) ,Organised by Department of Mechanical Engineering, AU College of Engineering (A), Andhra University, Visakhapatnam – 530 003, Andhra Pradesh, India, 13-15 Dec. 2010.Page 809-814.

9.         S.C Srivastava,Binay Kumar,Dr. Ritesh Kumar Singh,Pankaj Bhardwaj (2010) “A Petri-Net based Methodology for Establishment of AGVs fleet size in FMS”, 24th AIMTDR conference Dec. 2010 at Visakhapatnam .

10.       R.K.Singh and Lyes Benyoucef, Improved Decision Neural Network Based Approach For Multi-Criteria Supply Chain Coordination Problems, 7th CIRP ICME, Capri, Naples, Italy, 2010.

11.       R.K.Singh and Lyes Benyoucef, A Fuzzy Multi Attribute Decision Making Method for   E-Sourcing, IMS’2010, The 7th International Symposium On Intelligent & Manufacturing Systems, IUS , Sarajevo, Bosnia-Herzegovina.

12.       Pathak P, Jha. Sanjay Kumar, Singh A P, and Mondal N, “Study on effect of roll bite lubrication on rolling parameters of hot strip mill” Poster presentation on 7th International conference on Industrial Tribology, R&D SAIL, Ranchi, 2nd -4th Dec -2010.

Papers Published in Conferences (National):

 

1.         Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, “Implementation of cleaner production towards environmental quality improvement of SMEs in India” National conference in mechanical engineering for new generation industry, (EFME 2011), Industry- Institute partnership cell (AICTE sponsored) Ideal Institute of Technology in association with Ministry of New and Renewable Energy, Government of India, 12-13 March 2011, Allied Publishers pvt ltd. (ISBN no 978-81-8424-667-4) pp 93-99

2.         Thakur Abhinav Kumar, Vinay Sharma, Bijay Kumar Singh, “Eco Friendly Material Processing And its Important Relevance in Indian Context”, Eco-friendly conference for sustainable Development, GLA Institute Mathura, 19-21 November 2010

3.         Joyjeet Ghose, Vinay Sharma, Surender Kumar “Synthesis of AL-MMC Foam and its Potential Industrial Applications, Proceedings of National Conference On Recent Advances in Manufacturing (Ram-2010) S. V. National Institute of Technology Surat, 19-21 July, 2010,pp 39-44, (excel publication ISBN: 93-80697-05-8)

4.         Subodh Kumar,, Vinay Sharma, A. K. S. Choudhary, “A Review of Laser Based Direct Metal Rapid Prototyping Technology”,  Proceedings of National Conference On Recent Advances in Manufacturing (Ram-2010) S. V. National Institute of Technology Surat, 19-21 July, 2010, pp 186-191(excel publication ISBN: 93-80697-05-8)

5.         Rajeev Agrawal, Review of Variables Describing Robotic Arc Weld Seam Quality, National conference on Advances in Materials and Product Design, Organised by Dept of Mech. Engg. S.V.N.I.T, Surat, 22-23 Nov. 2010.Page 110-116, ISBN-978818465293-2

6.         Binay Kumar, Surender Kumar (2010) “The impacts of product modularity to support green life-cycle Engineering” Eco-friendly conference for sustainable development, GLA Mathura ( Nov 19-21, 2010).

 

YEAR  2009-10

 

International Journals

1.         Ashish Jagani, Vijay Pandey, Evaluation of Circle Fitting Algorithm for Coordinate Measuring Machine, International Journal of Mechanical Engineering, July-December 2009, Volume 2, Issue 2, Serial Publications, New Delhi.

2.         Pattanaik, L. N., Kumar, V., (2009), Multiple levels of reconfiguration for robust cells formed using modular machines, International Journal of Industrial and Systems Engineering (Inderscience Publishers), Vol 5, No. 4, pp-424-441.

3.         Rajeev Agrawal, S.K. Shukla, S. Kumar, M.K. Tiwari, Multi-Agent system for distributed computer aided process planning problem in e-manufacturing environment, International Journal of Advance Manufacturing Technology, Springer vol44, issue 5, page 579-594, 2009

4.         Pathak P, Jha. Sanjay Kumar, Singh A P, Tribological Approach for Improvement in Surface Quality of Hot and Cold Rolled Steel Strips, International Journal of Manufacturing Technology & Research, Vol. 5, No.1-2, Jan-Jun 2009.

National Journals

1.         Vijay Pandey, Ashish Jagani, Dimensional Measurement Verification of CMM Software Using Matlab Code, Journal of SCI-TECH Research - Volume 1, Issue 1, ISSN: 0974-9780, Jan-Jun 2009.

2.         S.Chattopadyaya, P. Sehgal, Vinay Sharma, Aniruddha Ghosh, A Critical Linguistic Assessment of the Process Parameters on The Relative Ranks of the Yield Parameters for Nd: Yag Laser Drilling, Indian Welding Journal, October, 2009, PP, 21-25.

3.         Sanjeev Kumar, S. Chattopadhyaya, Vinay Sharma, Green  Manufacturing: Green Value Chain Practices for the Indian Enterprises, ISST journal of Mechanical Engineering, Vol. 1 Jan-June 2010

6.         Proceedings

International Conference/Seminar Proceedings

1.         Vijay Pandey, Ashish Jagani, Evaluation of Circle Fitting Algorithm for Coordinate Measuring Machine, Proceeding of Indo-German Conference on PDE, Scientific Computing and Optimization in Applications (supported by INSA-DFG, CSIR & DST), Department of Mathematics & Statistics, IIT, Kanpur, October 7-9, 2009.

2.         Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, Approach of Green Supply Chain Management for Indian Enterprises, , 5th SIMSR-ASIA Marketing Conference at SIMSR (K.J. Somaiya Institute of Management Studies and Research), Mumbai India, 2nd - 3rd January 2010.

National Conference/Seminar Proceedings

1.         Rajeev Agrawal, S. Kumar, Advanced Planning And Scheduling System In Rolling Mill Industries, 25th National Convention of Mechanical Engineers, 6-7 November 2009, IEI Delhi State Center, New Delhi.

2.         Pathak P, Jha. Sanjay Kumar, Singh A P, Rai D, Improvement in rolling rate of thin gauge steel strips at a tandem cold mill, CD Proceeding of 3rd National workshop on Precision Forming: Modeling, analysis and system development, B.I.T Mesra, Ranchi, 15th -16th Feb -2010.

3.         Pattanaik, L. N., Applications of Soft Computing Tools in Metal Forming - A Review, Proceedings 3rd National Workshop on Precision Forming: (Modeling, Analysis & System Development), 15th and 16th February, 2010.

4.         Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, Supply Chain Management: a semiotics Approach, National Conference on Techno-Lingual Communication, Sunderdeep Engineering College Gaziabad, UP, 27 March 2010

5.         Sanjeev Kumar, Somnath Chattopadhyaya, Vinay Sharma, Approach to lean and Green supply chain system: a case study, Managerial Challenges of 21st Century in corporate world, BIT Noida Campus,UP, 12-13 February 2010.

 

Year before 2009

 

Research publication in Journals:

1.         L.N. Pattanaik and B.P. Sharma, “Implementing lean manufacturing with cellular layout : a case study”, International Journal of Advance Manufacturing Technology, Springer Publications, DOI 10.1007/s00170-008-1629-8, August 2008.

2.         Rajeev Agrawal, S.K. Shukla, S. Kumar and M.K. Tiwari, “Multi-Agent system for distributed computer aided process planning problem in e-manufacturing environment”, International Journal of Advance Manufacturing Technology, Springer Publications, DOI 10.1007/s00170-008-1844-3, December 2008.

3. Ranjan. R, Jha. S. K and Singh. S, "Frictional Conditions during sinter forming,” Journal of CMTI- Manufacturing Technology Today, Vol.2, Issue – 10, PP-12-16, Oct – 2003.(ISSN: 0972-7396).

4. Pandey. V, Jha. S. K and Ranjan. R, "A case study of value engineering in Bicycle design ,” Journal of VE for the Indian Value engineering Society - INVAVE, Vol. 12, No. 1&2 , PP-9-17,April – September 2003.

5. Jha. S. K and Jha. A. K, “Manufacturing metal artefacts by Dokra casting: a treatise with techno – economic aspects with respect to Jharkhand state”, Journal of Current Sciences, Vol. 5, Number 1, pp 127 – 132, 2004.(ISSN: 0972-6101).

6. Jha. S. K, “Effect of musculoskeletal discomforts on productivity of rural artefacts manufacturing industries workers in Jharkhand”, Journal of Current Sciences, Vol. 5, Number 2, pp 495 – 500. 2004.(ISSN: 0972-6101).

7. Jha. S. K and Kumar. S “Assessment of productivity of items manufactured by rural artefacts community- with special reference to Jharkhand state (India)”, The international journal of applied management and technology, Vol. 4, No. 2, PP – 288 -320, November 2006.(ISSN: 1554-4740; Publisher: Walden University Publishing, USA).

8. Jha. L. M and Jha. S. K, “Multi-Agent Based Web Manufacturing Management System in Tribal Artifact Production”, The international journal of applied management and technology, Vol. 5, No. 1, PP. 139-158, May 2007.(ISSN: 1554-4740; Publisher: Walden University Publishing, USA).

9. Jha. S. K, Singh. S and Kumar. S, “Investigations into heterogeneous deformation of sintered preform due to Die – work piece interfacial friction”, Indian Journal of Tribology, Tribology society of India, Vol.3,No 1, PP 7-13, Jan-June 2008.

10. Pathak. P, Singh. A. P, Rai. D, Roy. B and Jha. S. K, “Tribological Approach for Improvement in Surface Quality of Hot and Cold Rolled Steel Strips”, International Journal of Manufacturing Technology & Research, Vol. 5, No.1-2,pp. 93-100, Jan-Jun 2009.(ISSN: 0973-0281).

Research publication in Journals

1.         R.K.Singh, M. K. Tiwari, Nitesh Khilwani,  Justification for the Selection of Reconfigurable Manufacturing System: A Fuzzy Analytical Hierarchy Based Approach , International Journal of Production Research, 2007, 45(4), 3165-3190

2.         R.K.Singh, A.K.Choudhury, M.K.Tiwari, Improved Decision Neural Network (IDNN) based consensus method to solve a multi-objective group decision making problem, Advanced Engineering Informatics, 2007, 21, 335-348.

3.         Vijay Pandey and Surender Kumar. "Feature Recognition from Axis-symmetric Rotational Parts: A Syntactic Approach", The International Journal of Applied Management and Technology", Vol. 5, No., 2, pp. 113-135, 2007, A refereed journal published by the School of Management, Walden University.

4.         S.K. Jha, S. Singh and S. Kumar, Investigations into Heterogeneous Deformation of Sintered Preforms due to Die-Workpiece Interfacial Friction, Indian Journal of Tribology, Tribology Society of India, 2 (3), pp: 1-6, 2008.

5.         S. Singh, A.K. Jha, and S. Kumar, Upper Bound Analysis and Experimental Investigations of Dynamic Effects during Sinter-Forging of Irregular Polygonal Preforms, Journal of Materials Processing Technology, Elsevier, 194, pp: 134-144, 2007.

6.         S. Singh, A.K. Jha, and S. Kumar, High-Speed Sinter-Forging of Annular Ring Component, Tamkang Journal of Science and Engineering: An International Journal, Tamkang University Press, 10 (1), pp: 1-12, 2007.

7.         S. Singh, A.K. Jha, and S. Kumar, Dynamic Effects during Sinter-Forging of Axi-Symmetric Hollow Disc Preforms, International Journal of Machine Tools and Manufacture, Elsevier, 47, pp: 1101-1113, 2007.

8.         S. Singh, Upper Bound Analysis of Flashless Closed-Die Sinter-Forging of Cylindrical Preform into Double-Hub-Flange Component, Manufacturing Technology and Research: An International Journal, BIT Mesra Press, Vol. 3 (1 & 2), pp: 68-78, 2007.

b)         Proceedings

1.         Vinay Sharma, Failure mode and effects analysis of electronics stand by display system of modern aircraft, International Conference on quality management practices for organizational excellence, 16-17 august, Mumbai.

2.         S.P. Lal, G. Kaur and S. Singh, Forest Eco-Tourism: An Emerging Industry for Fast Track Economy Growth, Proceedings of International Conference on Spectrum of Hospitality and Tourism Industry in the Global Scenario, Department of Hotel Management and Catering Technology, BIT Mesra, Ranchi, Jharkhand, 15th January 2008, pp. 1-6.

3.         S. Singh, S.P. Lal, and S. Kumar, Cleaner Technologies & Strategies for Sustainable Development: Present Scenario & Future Directions (With Reference to Indian SMEs), Proceedings of the National Workshop on Cleaner Production for Sustainable Development: Status, Challenges, Opportunities and Vision, BIT Mesra, Ranchi, Jharkhand, 8th & 9th December 2007, pp. 1-39.

4.         K. Kumar, N.K. Singh, A. Dubey and S.P. Lal, LD Slag Utilization: A Case Study of Cleaner Technology, Proceedings of the National Workshop on Cleaner Production for Sustainable Development: Status, Challenges, Opportunities and Vision, BIT Mesra, Ranchi, Jharkhand, 8th & 9th December 2007, pp. 134-146.

5.         A.M. Dubey, J. Ghose and S.P. Lal, A Systematic Approach to the Control of Industrial Water Pollution, Proceedings of the National Workshop on Cleaner Production for Sustainable Development: Status, Challenges, Opportunities and Vision, BIT Mesra, Ranchi, Jharkhand, 8th & 9th December 2007, pp. 108-111.

6.         S. Singh, S.P. Lal and S. Kumar, Product Takeback: A Successful Solution to Environmental-Conscious Manufacturing, Proceedings of the All India Seminar on Eco-Friendly Manufacturing, The Institution of Engineers (I), Ranchi, Jharkhand, 22nd & 23rd September 2007, pp. 62-69.

7.         J. Ghose, S. Singh, S.P. Lal and S. Kumar, Product Remanufacturing for Eco-Friendliness, Proceedings of the All India Seminar on Eco-Friendly Manufacturing, The Institution of Engineers (I), Ranchi, Jharkhand, 22nd & 23rd September 2007, pp. 99-104.

8.         S. Singh, S.P. Lal and S. Kumar, Institute-Industry Interaction for Competitiveness, Proceedings of the National Workshop on Industry Institute Interaction (NWIII), BIT Sindri, Dhanbad & SPFU, Ranchi, Jharkhand, 13th & 14th July, 2007, pp. 1-31.

9.         S. Singh, G. Kaur and S. Kumar, Sustainable Development and Cybernetic Control Model of Indian Coastal Tourism, Proceedings of International Conference on Spectrum of Hospitality and Tourism Industry in the Global Scenario, Department of Hotel Management and Catering Technology, BIT Mesra, Ranchi, Jharkhand, 15th January 2008, pp. 1-6.

10.       S. Kumar, S. Singh and J. Ghose, A Life Cycle Assessment of Machining and Sand Casting, Proceedings of the National Workshop on Cleaner Production for Sustainable Development: Status, Challenges, Opportunities and Vision, BIT Mesra, Ranchi, Jharkhand, 8th & 9th December 2007, pp. 52-59.

11.       A.K. Sharma, P.D. Mishra, K.P. Sarkhel and S. Singh, Fly Ash Utilization: A Case Study Of Sustainable Alternative to Incineration (Thrust Areas and Emerging Trends In India), Proceedings of the National Workshop on Cleaner Production for Sustainable Development: Status, Challenges, Opportunities and Vision, BIT Mesra, Ranchi, Jharkhand, 8th & 9th December 2007, pp. 154-164.

12.       S. Singh, Upset-Forging of Sintered Aluminium Truncated Conical Preforms, Proceedings of the 10th Asian Symposium on Precision Forging (ASPF), National Physical Laboratory, New Delhi, 5th - 7th November, 2007.

13.       S. Singh, Rotary Forging of Sintered Axi-Symmetric Disc Preforms, Proceedings of the National Conference on Advances in Materials and Manufacturing Technology (AMMT-2007), Punjab Engineering College, Chandigarh, 21st & 22nd September 2007.

14.       R. Agarwal, Green Supply Chain Management: A Strategic Analysis Tool,  In Context to Indian Automobile Industry”,  National Seminar on “ Eco-Friendly Manufacturing” , Organised by Institution Of Engineers (India), Jharkhand State Chapter,  in collaboration with  Department of Production Engineering. , Birla Institute of Technology, Mesra, Ranchi, 22nd-23rd September 2007.

15.       J. Ghose, S. Singh and S. Kumar, Environmentally-Benign Manufacturing Case Study of Machining and Sand Casting Processes, Proceedings of the All India Seminar on Eco-Friendly Manufacturing, The Institution of Engineers (I), Ranchi, Jharkhand, 22nd & 23rd September 2007, pp. 19-28.

Research publication in Journals

1.         International Journal of Applied Management and Technology, Vol. 4, No. 2, November 2006, pp. 288-320, Assessment of productivity of items      manufactured by rural artefacts community with special reference to         Jharkhand State (India), S.K. Jha, S. Kumar.

2.         Tamkang Journal of Science & Engineering: An International Journal, Tamkang University Press, Vol. 9, No. 4, 2006, pp. 313 – 324,            Analysis of Rotary Forging of Sintered Preforms, Part – I: Indentation Phase, S. Singh, S. Kumar, A.K. Jha.

3.         Journal of Manufacturing Technology Today, CMTI, India, Vol. 2, No. 5, 2006, pp. 23 – 27, Forging of Sintered Components: Technology Management Issues, S. Singh, S. Kumar, A.K. Jha.

4.                     International Journal of Advance Manufacturing Technology, Springer, Volume 29, No- 11-12, 2006, pp. 1194-1202, Psycho-Clonal based approach to Solve a TOC Product Mix Decision Problem, R.K.Singh, S.Kumar, Prakash, and M.K.Tiwari.

5.                     International Journal of Production Research, Taylor & Francis, Vol. 44, No. 7, 2006, pp. 1399-1429, Lean Tool Selection In A Die Casting Unit: A Fuzzy Based Decision Support Heuristic,  R.K.Singh, S.Kumar, A.K.Choudhury, and M.K.Tiwari.

6.                     Production Planning & Control, Taylor & Francis, Vol. 17, No. 4 , 2006, pp. 407 – 423, Implementing the Lean Sigma Framework in an Indian SME: A Case Study, R. K. Singh, M. Kumar, J. Antony, M. K. Tiwari and D. Perry.

7.                     Journal of Engineering Manufacture IMechE:Part B, Professional Engineering Publishing, Vol. 220, No. 10, 2006, pp. 1735-1749, An Integrated Fuzzy based Decision Support System for the Selection of Lean Tools: A Case Study from the Steel Industry, R.K.Singh, A.K.Choudhury; and M.K.Tiwari, R.S. Maull.

8.                     International Journal of Production Research, Taylor & Francis, Published Online DOI: 10.1080/00207540600844043, 2006, Justification for the Selection of Reconfigurable Manufacturing System: A Fuzzy Analytical Hierarchy Based Approach, R. K. Singh, Nitesh Khilwani, M. K. Tiwari.

9.                     International Journal of Advance Manufacturing Technology, Springer, Vol. 29, No. 11-12, 2006, pp. 1212-1231, An interactive approach to solve the operation sequencing  problem using simulated annealing Vijay Pandey, M. K. Tiwari, and S. Kumar.

10.       Tamkang Journal of Science & Engineering: An International Journal, Tamkang University Press, Vol. 9, No. 4, 2006, pp. 325 – 330,            Analysis of Rotary Forging of Sintered Preforms, Part – II: Rotary Phase, S. Singh, S. Kumar, A.K. Jha.

11.                   Tamkang Journal of Science & Engineering: An International Journal, Tamkang University Press, Vol. 7, No. 4, 2006, pp. 227 – 236, Energy Analysis during High-Speed Sinter-Forging of Truncated Conical             Preforms, S. Singh, S. Kumar, A.K. Jha.

12.                   International Journal of Advanced Manufacturing Technology, Springer, Published on line D.O.I. 10.1007/s00170-006-0892-9. 2006, Development of Intelligent Agent Based AGV Controller for Flexible Manufacturing System S.C. Srivastava, M. K. Tiwari, S. Kumar, and A. K. Choudhary.

13.       Science and Technology of Welding and Joining, Institute of Metal Mineral and Mining, Vol. 11, pp. 337-340, 2006, Two modes of metal flow phenomenon in friction stir welding, S. Muthukumaran and S. K. Mukherjee.

14.       International Journal of Advanced Manufacturing and Technology, Springer publications (published online on 15 December 2006), A Study on Electromagnetic Properties during Friction Stir Weld Failure, S. Muthukumaran, Kumar Pallav, V.K. Pandey and S. K. Mukherjee.

15.       International Journal of Advanced Manufacturing and Technology, Springer publications (Published on line on 2nd December 06), Condition monitoring   of first mode of metal transfer in friction stir welding by image processing techniques, Preetish Sinha, S Muthukumaran, R.Sivakumar and S.K.Mukherjee.

16.                   International Journal of Advanced Manufacturing Technology Published Online, 2006. Cell Formation in the Presence of Reconfigurable Machines, L. N. Pattanaik, P. K. Jain, N. K. Mehta.

17.                   Journal of Manufacturing Technology Today, CMTI, India, Vol. 2, No. 5, 2006, pp. 23–27, 2006. Forging of Sintered Components: Technology Management Issues, S. Singh, S. Kumar, A. K. Jha.

b)         Proceedings

1.         International conference on Cleaner technology and Environmental Management, 4-6th January 2007, Organised by Pondicherry Engineering College, Pondicherry, Friction Stir Welding–A Cleaner Joining process, S. Muthukumaran and S. K. Mukherjee.

2.         National seminar on Focus Human Resource, 8-9, April 2006, College of Agribusiness Management, Pantnagar, Stress, health and productivity:    Case study of artefacts manufacturing units of Jharkhand, S.K. Jha, S. Kumar.

3.         National seminar on Bharatiya Heritage in Engineering and Technology, 11-           13, May 2006, Indian Institute of Sciences, Bangalore, Dokra brass             artefacts from Jharkhand: Glorious past and uncertain future, S.K. Jha, S. Kumar.

4.         21st National Convention of Production Engineers & National Seminar on Best Practices in Manufacturing, 9-10 Dec, 2006, The Institution of Engineers (India) Jharkhand State Centre and Department of Production Engineering, B.I.T. Mesra, Ranchi, A strategic framework of an effective advanced planning and scheduling system, R. Agarwal.

6.         National Workshop on lean manufacturing implementation on 8-9 September, 2006, Birla Institute of Technology, Mesra, Ranchi, Implementation of lean manufacturing in industries–A case study, S. Muthukumaran.

7.         National Workshop on Lean Implementation, Sept 9-10, 2006, BIT, Mesra, Ranchi. Methodologies for Implementing Lean Manufacturing by Understanding Products, Demands and Processes, L. N. Pattanaik.

8.         21st National Convention of Production Engineers and National Seminar on Best Practices in Manufacturing, Dec 10-11, 2006, BIT, Mesra, Ranchi. Machine and System Level Design Methodologies

 for Reconfigurable Manufacturing Systems, L. N. Pattanaik.

9.         National Conference on Achieving Technological Excellence in New Millenium, January 23-24, 2007, Department of Mechanical Engineering, BIT, Mesra, Ranchi. Experimental evaluation of heat source size for modelling of arc welding, A.N. Sinha.

International

1.         S. Kumar, S K Mukherjee and P K Srivastava, "Effect of Over-Voltage on Materail Removal Rate During Electrochemical Machining", Tamkang Journal of Science and Engineering, 2005.

2.         S Kumar and P K Srivastava, "Tribochemistry of Lubrication Issues of Magnetic Dosk Storage devices”, Tribology International Journal, 2005.

3.         R.K.Singh, S.Kumar, Prakash, and M.K.Tiwari "Psycho-Clonal based approach to Solve a TOC Product Mix Decision Problem", International Journal of Advance Manufacturing Technology, 2005, Published Online: DOI 10.1007/s00170-005-0019-8

4.         R.K.Singh, S.Kumar, A.K.Choudhury, and M.K.Tiwari "Lean Tool Selection In A Die Casting Unit: A Fuzzy Based Decision Support Heuristic", International Journal of Production Research, 2006, Vol. 44, No. 7, 1399-1429.

5.         Vijay Pandey, M. K. Tiwari, S. Kumar,  "An interactive approach to solve the operation sequencing  problem using simulated annealing", International Journal of Advance Manufacturing Technology, Published On- line, DOI 10.1007/s00170-005-0007-z.

6.         Vinay Sharma, Surender Kumar "A study  of process parameters for coal cutting under Indian environmental condition using hydro jet cutting system",  International Journal of Manufacturing Technology and Management, Vol. 7, Nos. 2/3/4, 2005

7.         Saranjit Singh, "Forging of Sintered Components: Technology Management Issues", Journal of Manufacturing Technology Today, CMTI, vol. 5, No. 2, February 2006, pp. 23 - 27.

 

 

CONFERENCE PROCEEDINGS

International

1.         S. Muthukumaran, "Parameter Optimisation for Tensile Properties in Friction Stir Welding using Taguchi Technique" has been accepted for 7th International Trends in Welding Research Conference, May 16-20, 2005. Georgia, USA.

2.         R.K.Singh and S.Kumar "Molecular Manufacturing: an emerging technology of 21st century", International Symposium on Intelligence Based Materials & Manufacturing, B.I.T, Mesra, Ranchi, August 2005. pp.225-232.

3.         R.K.Singh, S.Kumar and M.K.Tiwari "An Intelligent Model For Multi- Preference, Multi- Criteria, Decision Making To Select A Process Mapping Tool For Minimization of Wastes", International Symposium on Intelligence Based Materials & Manufacturing, B.I.T, Mesra, Ranchi, August 2005. pp.342-343.

4.         S.C. Srivastava, Ujjawal Nag, Vijay Pandey and Surender Kumar, "Evolving Artificial Neural Network With The Use of Hybrid Strength Pareto Evolutionary Algorithm and Back Propagation Algorithm", Proceeding of International Symposium on Intelligence Based Materials and Manufacturing, B.I.T., Mesra, Ranchi, August 18-20, 2005.

5.         Pattanaik L.N.et al., "Cell formation using modular-reconfigurable machines", Proceedings of 16th International Symposium, 19-22nd, October 2005, Optiza, Croatia. 

National

1.         Saurbh Agarwal, Surender Kumar and Vijay Pandey, "Using Mechatronics in Product Development", 18th -19th February 2006, Proceeding of All India Seminar on Product Development, Jointly organized by MNNIT Allahabad and Institution of Engineers (I), Allahabad Local Centre.

2.         L.N. Pattanaik, et al, "Genetic Algorithm based approach to machine grouping in cellular manufacturing using a new similarity measure", Proceedings of All India Seminar on CAD/CAM, Robotics and Futuristic Factories, BIT, Mesra, Ranchi, 10-11 December, 2005.

3.         Vinay Sharma, et. al. "Expert System for Lubricant Condition Monitoring", Recent Advances in Industrial Tribology and Maintenance” 21st-22nd January 2006, NIT, Rourkela, Orissa.

4.         S.C.Srivastava, Aakash Roy, Vinay Sharma and S.Kumar. "A Hybrid Artificial Intelligence based approach to Intelligent Manufacturing Systems". All India Seminar on CAD/CAM, Robotics and Futuristic Factories,B.I.T Mesra,Ranchi,December10-11,2005.

5.         Vinay Sharma, et. al. "Automation of Water Jet Machine", CAD/ CAM, Robotics and futuristic factory, 10th¬¬-11th December 2005, Institution of Engineers (India), Jharkhand State Centre.

6.         Vinay Sharma, et. al. "Hierarchical Oriented Multi-Agent Based Data Mining Distribution For Manufacturing Sector", CAD/ CAM, Robotics and futuristic factory, 10th¬¬-11th December 2005, Institution of Engineers (India), Jharkhand State Centre.

G.        Seminar/Conference/Short Term Course attended by Faculty Members

1.         Saranjit Singh, One-day workshop on "Academic Reforms", TEQIP Programme, BIT Mesra, Ranchi.

2.         S. K. Jha, R. K. Singh, S. C. Srivastava, R. K. Ranjan, Rajeev Agarwal, A. N. Sinha, UGC - Refresher course on "Automation In Manufacturing" held at Department of Production Engineering, BIT Mesra, Ranchi, 28th Nov – 17th Dec, 2005.

3.         R.K. Singh, International Symposium on "Intelligence Based Materials & Manufacturing", B.I.T Mesra, Ranchi, August 2005.

4.         Short term Training Programme on "An Modelling in Metal Processing: Concepts, Theory and Applications", at IIT Kanpur, 1-4, February 2005.

5.         S.K. Jha, S.C. Srivastava, Short term Course on "Mechatronics, Robotics and Industrial Automation", Under TEQIP scheme, at Bengal Engineering and Science University, Shibpur, 2-7, January 2006.

6.         S.K. Jha, Workshop and Exhibition on "Technology Development: Utilisation and Transfer", at BIT Mesra, Ranchi, 6th March 2006.

1. JOURNALS (International / National)

 

1.         S. Kumar, S K Mukherjee and P K Srivastava, “Effect of Over-Voltage on Materail Removal Rate During Electrochemical Machining”, Tamkang J. of Sci. and Engineering, 2005.

2.         S Kumar and P K Srivastava, “Tribochemistry of Lubrication Issues of Magnetic Dosk Storage devices”, Tribology International Journal, 2005.

3.         Sanjay Kr. Jha, “Manufacturing metal artifacts by Dokra casting: A treatise with techno economic aspects with respect to Jharkhand state”, Journal of current sciences, Vol 5, No 1, 2004, pp 127 – 132.

4.         Sanjay Kr. Jha, “Effect of musculoskeletal discomforts on productivity in rural artifacts manufacturing industries workers of Jharkhand”, Journal of current sciences, Vol 5, No 2, 2004, pp 495 – 500.

5.         Vijay Pandey, R.K. Srivastava, "Dynamic Modification of Machine Tool Structure". Journal of Mechanical Engineering, Institution of Engineers (India), Vol. 84, October, 2004.

6.         R.K.Singh, Prakash, S Kumar & M.K. Tiwari “Psycho-clonal based approach to solve a TOC product mix decision problem”, Int. J. of Advanced Manufacturing Technology. (Accepted for publication).

7.         Vijay Pandey, M.K. Tiwari and Surender Kumar. "An Interactive Approach to Solve the Operation Sequencing Problem Using Simulated Annealing", Int. J. of Advanced Manufacturing Technology. (Accepted for publication).

8.         Kumar S., Ranjan R K, “High speed forging of solid powder discs of large cyliderness ratio”, Indian Academy of Science, Sadhana, Bangalore Vol. 29, Part 5, pp 525-533. (Oct. 2004)

9.         Kumar S., Ranjan R K, “An upper bound solution closed die sinter forging of hexagonal shapes at high speed”, Indian Academy of Science, Sadhana, Bangalore Vol. 29, Part 3, pp 525-533. (June. 2004)

10.       Saranjit Singh, A K Jha, S Kumar, “An energy analysis during forging of sintered truncated conical perform at high speed”, Tamkag Journal of Sci. and Engg. (An Int. J.), Vol. 7, No. 4, pp 227-236 (Dec. 2004).

11.       Kumar S., Ranjan R K, “High speed forging of solid powder polygonal discs with bulging”, Tamkag Journal of Sci. and Engg. (An Int. J.), Vol. 7, No. 4, pp 219-226 (Dec. 2004).

12.       Vinay Sharma, Surender Kumar “A study  of process parameters for coal cutting under Indian environmental condition using hydro jet cutting system”,  Int. J. Manufacturing Technology and Management, Vol. 7, Nos. 2/3/4, 2005

2. CONFERENCE PROCEEDINGS (International / National)

 

1.         S Kumar, S K Mukherjee and P K Srivastava, “Nano Aspectes of Electrochemical Machining”, Proceedings of NANOSPHERE, 2004 page 59-65.

2.         S Kumar, S K Mukherjee and P K Srivastava, “Effect of Electrolyte on current carrying process in electrochemical Machining”, proceedings of Advances in Manufacturing Technology in the Era of Globalization, page 349-353, January 21-22, 2005, Pune.

3.         Vinay Sharma, S Mutthukumaran “Parametric Optimization For Quality Surface Finish In Laser Cutting Using Fractional Factorial Design”, Proc. of 21st AIMTDR, Vellore Institute of Technology, Vellore, December 2004.

4.         Vinay Sharma, Vijay Pandey, Surender Kumar, “Integrated Curriculum Design and its Analysis”, National Workshop on “Curriculum Development for Technical Education” from 3rd to 4th April 2004.

5.         Surender Kumar, A.K.Jha, “Perspectives on Engineering Education in the Information Age”, National Workshop on “Curriculum Development for Technical Education” from 3rd to 4th April 2004.

6.         Rajeev Agrawal, Surender Kumar, “Green Supply Chain Management, Environmental Concerns of supply chain: Strategic initiatives and implementation for Indian Firms” National Seminar on “Green Productivity & Sustainable Development”10-11 March, 2005 at BIT, Mesra, Ranchi

7.         Rajeev Agrawal, Surender Kumar “Collaborative product development in the context of Product Lifecycle Management-A paradigm” National Conference on “Advancement in Manufacturing Technology in the era of Globalization” Organized by Pune Institute of Engineering & Technology, Pune & Indian Institution of Production Engineers, Pune, 21st –22nd January 2005

8.         B. K. Singh, “Planning and Evaluation of Laboratory Assignments”, National Workshop on “Curriculum Development for Technical Education” from 3rd to 4th April 2004.

9.         R.K. Singh, S. Kumar & M.K. Tiwari, “A Theory of Constraint Based Product Mix Decision Problem: A Hybrid Tabu-Simulated Annealing Based Approach”, proceedings of National Conference on “AMTEG-2005” Organized by Pune Institute of Engineering & Technology, Pune & Indian Institution of Production Engineers, Pune, 21st –22nd January 2005.

10.       R.K. Singh, S. Kumar & M.K. Tiwari, “Resolving a TOC Product Mix Decision Problem Using Psycho-Clonal Algorithm”, Proc. of 21st AIMTDR, Vellore Institute of Technology, Vellore, Dec. 2004.

11.       Vijay Pandey, Vinay Sharma, Ashutosh Shankar Gupta & Ujjawal Nag, "Effect of Internet on Design and Manufacturing", Proc. of Information Resource Management in Digital Environment, B.I.T., Mesra, Ranchi, October 1-2, 2004.

12.       Surender Kumar, Vijay Pandey and Vinay Sharma, " Self Learning Concept in Technical Education Through Curriculum Development", Proc. of Destination 2020 India: A Developed Nation, 19th Indian Engineering Congress, Institution of Engineers (I), Maharashtra State Centre, Mumbai, December 17-19, 2004.

13.       S.C. Srivastava, Surender Kumar, M.K.Tiwari & A. K. Choudhary, “Part Selection and Operation Allocation on machines in an FMS for Sheet Metal Processing using Genetic Algorithm with Chromosome Differentiation based Approach”, Proc. Of National Conference on “AMTEG-2005” Organized by Pune Institute of Engineering & Technology, Pune & Indian Institution of Production Engineers, Pune, 21st –22nd January 2005.

14.       S. P. Lal & Surender Kumar, “Manufacturing Technology Education in Era of Globalization”, Proc. of Destination 2020 India: A Developed Nation, 19th Indian Engineering Congress, Institution of Engineers (I), Maharashtra State Centre, Mumbai, December 17-19, 2004.

15.       S. P. Lal & Surender Kumar, “Some strategic Problems on Sustainable Development Manufacturing Practice”, National Seminar on “Green Productivity & Sustainable Development”10-11 March, 2005 at BIT, Mesra, Ranchi.

16.       S. Muthukumaran, Vinay Sharma, S. Kumar and S. K. Mukherjee & Pankaj Mishra, “Friction Stir Welding- An Environment Friendly Manufacture Process”, National Seminar on “Green Productivity & Sustainable Development”10-11 March, 2005 at BIT, Mesra, Ranchi.

17.       S. Mutthukumaran, “Parameter Optimisation for Tensile Properties in Friction Stir Welding using Taguchi Technique” has been accepted for 7th International Trends in Welding Research Conference, May 16-20, 2005. Georgia, USA.

Last Updated - 26-Aug-2023