2022

1.    Tiwari AK, Jha JM, Pal DB. Biosorption of Precious Metals from Wastewater. In: Biosorption for Wastewater Contaminants. 2022. p. 185–200. Book chapter

2.    Ruidas BC, Pal DB. Biosorption of Arsenic from Wastewater. In: Biosorption for Wastewater Contaminants. 2022. p. 269–83. Book chapter

3.    Tiwari AK, Pal DB. Nutrients contamination and eutrophication in the river ecosystem. In: Ecological Significance of River Ecosystems. 2022. p. 203–16. Book chapter

4.    Kumar R, Prajapati YN, Baranwal AK. Free Convection in a Square Enclosure from Two Submerged Cylinders of Different Aspect Ratio in Shear-Thinning Fluids. In: Lecture Notes in Mechanical Engineering. 2022. p. 87–101. Book chapter

5.    Pal DB, Singh P. Utilization of Waste Biomass in Energy, Environment and Catalysis. Utilization of Waste Biomass in Energy, Environment and Catalysis. CRC Press; 2022. Book chapter

6.    Tiwary P, Toppo PN, Karmakar A. Transient analysis and parameter estimation with optimizations in a plate heat exchanger. Sādhanā [Internet]. 2022;47(3):125. Available from: https://doi.org/10.1007/s12046-022-01885-4 Book chapter

7.    Pal DB, Singh A, Bhatnagar A. A review on biomass based hydrogen production technologies. Int J Hydrogen Energy [Internet]. 2022;47(3):1461–80. Available from: https://www.sciencedirect.com/science/article/pii/S0360319921041562 SCI

8.    Pethaperumal S, G T M. Synthesis, characterization of SnO2 three-dimensional microbars decorated with nanostructures and electrical properties of PMMA-SnO2 nanocomposites. Surfaces and Interfaces [Internet]. 2022;30:101872. Available from: https://www.sciencedirect.com/science/article/pii/S2468023022001535 SCI

9.    Sinha R, Sengupta S, Jayapalan S. Effect of hybrid fillers on the mechanical behavior of polypropylene based hybrid composites. J Indian Chem Soc. 2022;99(2). SCI

10. Pal DB, Tiwari AK, Prasad N, Srivastava N, Almalki AH, Haque S, et al. Thermo-chemical potential of solid waste seed biomass obtained from plant Phoenix dactylifera and Aegle marmelos L. Fruit core cell. Bioresour Technol. 2022;345. SCI

11. Giri DD, Jha JM, Srivastava N, Hashem A, Abd_Allah EF, Shah M, et al. Sustainable removal of arsenic from simulated wastewater using solid waste seed pods biosorbents of Cassia fistula L. Chemosphere. 2022 Jan;287:132308. SCI

12. Haque S, Srivastava N, Pal DB, Alkhanani MF, Almalki AH, Areeshi MY, et al. Functional microbiome strategies for the bioremediation of petroleum-hydrocarbon and heavy metal contaminated soils: A review. Sci Total Environ [Internet]. 2022;833:155222. Available from: https://www.sciencedirect.com/science/article/pii/S0048969722023154 SCI

13. Singh P, Pal DB, Mohammad A, Alshahrani MY, Ahmad I, Mishra PK, et al. Improved production of thermo-alkali-tolerant fungal cellulolytic cocktail following Co-fermentation of sugarcane bagasse and secondary sewage sludge. Biomass Convers Biorefinery. 2022; SCI

14. Srivastava N, Singh R, Srivastava M, Syed A, Bahadur Pal D, Bahkali AH, et al. Impact of mixed lignocellulosic substrate and fungal consortia to enhance cellulase production and its application in NiFe2O4 nanoparticles mediated enzymatic hydrolysis of wheat straw. Bioresour Technol. 2022;345. SCI

15. Bahadur Pal D, Saini R, Srivastava N, Ahmad I, Alshahrani MY, Kumar Gupta V. Waste Biomass Based Potential Bioadsorbent for Lead Removal from Simulated Wastewater. Bioresour Technol. 2022;126843. SCI

16. Sarkhel S, Roy A. Phytic acid and its reduction in pulse matrix: Structure–function relationship owing to bioavailability enhancement of micronutrients. J Food Process Eng. 2022; SCI

17. Singh T, Pal DB, Almalki AH, Althobaiti YS, Alkhanani MF, Haque S, et al. Green synthesis of TiO2 bionanocomposite using waste leaves of water hyacinth: Application in antibacterial activity of toilet bacteria Serratia marcescens. Mater Lett. 2022;316. SCI

18. Tiwari AK, Pal DB. Nutrients contamination and eutrophication in the river ecosystem. Ecol Significance River Ecosyst. 2022;203–16. SCI

19. Basu S, Shree V, Sen AK. Role of cerium as a promoter and process optimization studies for dehydration of glycerol to acetol over copper chromite catalyst. J Rare Earths. 2022 Jan;40(1):63–72.

20. Kumar K, Keshri S, Bharti A, Kumar S, Mogurampelly S. Solubility of Gases in Choline Chloride-Based Deep Eutectic Solvents from Molecular Dynamics Simulation. Ind Eng Chem Res. 2022;61(13):4659–71. SCI

21. Tiwary, P., Toppo PN& K. Transient analysis and parameter estimation with optimizations in a plate heat exchanger. Sādhanā. 2022; SCI

22. Giri DD, Jha JM, Srivastava N, Shah M, H. Almalki A, F Alkhanani M, et al. Waste seeds of Mangifera indica, Artocarpus heterophyllus, and Schizizium commune as biochar for heavy metal removal from simulated wastewater. Biomass Convers Biorefinery. 2022;

23. Singh A, Pal DB, Mohammad A, Alhazmi A, Haque S, Yoon T, et al. Biological remediation technologies for dyes and heavy metals in wastewater treatment: New insight. Bioresour Technol. 2022 Jan;343:126154. SCI

24. Giri DD, Alhazmi A, Mohammad A, Haque S, Srivastava N, Thakur VK, et al. Lead removal from synthetic wastewater by biosorbents prepared from seeds of Artocarpus Heterophyllus and Syzygium Cumini. Chemosphere. 2022 Jan;287:132016. SCI

25. Tiwari AK, Pal SL, Srivastava N, Shah M, Ahmad I, Alshahrani MY, et al. Bioadsorbent and adsorbent-based heavy metal removal technologies from wastewater: new insight. Biomass Convers Biorefinery. 2022; SCI

26. Saha S, Roy A. Selecting high amylose rice variety for puffing: A correlation between physicochemical parameters and sensory preferences. Meas Food. 2022;5:100021. SCI

27. Ahmad MW, Anand S, Dey B, Yang D-J, Choudhury A. Asymmetric supercapacitors based on porous MnMoS4 nanosheets-anchored carbon nanofiber and N, S-doped carbon nanofiber electrodes. J Alloys Compd. 2022;164271. SCI

28. Dey B, Ahmad MW, Sarkhel G, Yang DJ, Choudhury A. Fabrication of porous nickel (II)-based MOF@carbon nanofiber hybrid mat for high-performance non-enzymatic glucose sensing. Mater Sci Semicond Process. 2022;142. SCI

29. Choudhary A, Pal S, Sarkhel G. Broadband millimeter-wave absorbers: a review. Int J Microw Wirel Technol. 2022;1–17. SCI

30. Tiwari AK, Jha JM, Pal DB. Biosorption of Precious Metals from Wastewater. Biosorption Wastewater Contam. 2022;185–200. SCI

31. Kumar K, Bharti A, Mogurampelly S. Insights on choline chloride–based deep eutectic solvent (reline) + primary alcohol mixtures: a molecular dynamics simulation study. J Mol Model. 2022;28(2). SCI

32. Venkatesan J, Thangavelu P, Jubie S, Jayapalan S, Thangavel S. A new open-source python script for QSAR studyand its validation of cytotoxicity activity of thiazole analogues on MCF-7 cell line. 2022; SCI

33. Khan M, Singh T, Pal DB, Khan S, Ahmad S, Jandrajupalli SB, et al. Enhanced production of bacterial hydrolytic endoglucanase enzyme using waste leaves of water hyacinth and its thermal stability under the influence of TiO2 nanoparticles. Biomass Convers Biorefinery. 2022; SCI

34. Choudhary A, Tiwari S, Pal S, Sarkhel G. A Transparent Broadband Millimeter-Wave Absorber for Ka to V Bands Applications. In: Mekhilef S, Shaw RN, Siano P, editors. Innovations in Electrical and Electronic Engineering. Singapore: Springer Singapore; 2022. p. 254–60. SCI

35. Srivastava N, Singh R, Mohammad A, Pal DB, Syed A, Elgorban AM, et al. Graphene oxide mediated enhanced cellulase production using pomegranate waste following co-cultured condition with improved pH and thermal stability. Fuel. 2022;312. SCI

36. Roy A, Patra M, Sarkhel S, Sengupta S, Saha S, Jha S, et al. Fucose-containing Abroma augusta mucilage hydrogel as a potential probiotic carrier with prebiotic function. Food Chem. 2022;387. SCI

37. Singh R, Pal DB, Alkhanani MF, Almalki AH, Areeshi MY, Haque S, et al. Prospects of soil microbiome application for lignocellulosic biomass degradation: An overview. Sci Total Environ [Internet]. 2022;838:155966. Available from: https://www.sciencedirect.com/science/article/pii/S0048969722030637 SCI

38.       Giri DD, Dwivedi H, Khalaf D. Alsukaibi A, Pal DB, Otaibi A Al, Areeshi MY, et al. Sustainable production of algae-bacteria granular consortia based biological hydrogen: New insights. Bioresour Technol [Internet]. 2022;352:127036. Available from: https://www.sciencedirect.com/science/article/pii/S0960852422003650 SCI

2021

1. Saha, S., Jha, S., Tiwari, A., Jayapalan, S. & Roy, A. Considerations for improvising fortified extruded rice products. Journal of Food Science (2021).
2. Md. Wasi Ahmad, Surbhi Anand, Atiya Fatima, Duck-Joo Yang, Arup Choudhury. Facile synthesis of copper oxide nanoparticles-decorated polyaniline nanofibers with enhanced electrochemical performance as supercapacitor electrode. Polymers for Advanced Technologies (2021).
3. Md Wasi Ahmad, Sushil Verma, Duck-Joo Yang, Mazhar Ul Islam, Arup Choudhury. Synthesis of silver nanoparticles-decorated poly(m-aminophenol) nanofibers and their application in a non-enzymatic glucose biosensor. Journal of Macromolecular Science, Part A (2021).
4. Saha, S., Jha, S., Tiwari, A., Jayapalan, S. & Roy, A. Considerations for improvising fortified extruded rice products. Journal of Food Science (2021).
5. Amit Kumar Tiwari, Deen Dayal giri and Dan Bahadur Pal. Nutritional Analysis of Mango, Jackfruit, Jamun and Amaltash Seeds Waste Biomass. Fourrages (2021) Vol. 244 (11), Pp. 42-53.
6. Deen Dayal Giri, Jay Mant Jha, Amit Kumar Tiwari, Neha Srivastava, Abeer Hashem, Abdulaziz A. Alqarawi, Elsayed Fathi Abd_Allah and Dan Bahadur Pal. Java plum and amaltash seed biomass based bio-adsorbents for synthetic wastewater treatment. Environmental Pollution (2021) Vol. 280.
7. Pal, D.B., Tiwari, A.K., Srivastava, N. et al. Thermal studies of biomass obtained from the seeds of Syzygium cumini and Cassia fistula L. and peel of Cassia fistula L. fruit. Biomass Conv. Bioref. (2021).Pp- 1-12.
8. S. Basu, Vibha Shree, A.K.Sen., “Role of cerium as a promoter and process optimization studies for dehydration of glycerol to acetol over copper chromite catalyst”, in J. Rare Earth, (Accepted 2021).
9. Ghosh D, Kumar P, Sharma S, Guha C, & Ghose J. Numerical investigation on latent heat thermal energy storage in a phase change material using a heat exchanger. Heat Transfer 50:4289–4308. (2021)

2020

1. Roy, A., Srivastava, S. K., Shrivastava, S. L. & Mandal, A. K. Hierarchical Assembly of Nanodimensional Silver-Silver Oxide Physical Gels Controlling Nosocomial Infections. ACS Omega 5, 32617–32631 (2020).
2. Saha, S. & Roy, A. Puffed rice: A materialistic understanding of rice puffing and its associated changes in physicochemical and nutritional characteristics. J. Food Process Eng. 43, e13479 (2020).
3. Roy, A. et al. Can concomitant use of zinc and curcumin with other immunity‐boosting nutraceuticals be the arsenal against COVID-19? Phyther. Res. 34, 2425–2428 (2020).
4. Saha, S. & Roy, A. Whole grain rice fortification as a solution to micronutrient deficiency: Technologies and need for more viable alternatives. Food Chemistry 326, 127049 (2020).
5. Md. Wasi Ahmad, Baban Dey, Alia Abdulshafi Sammar, Arup Choudhury. Sulfonic-functionalized graphene oxide reinforced polyethersulfone nanocomposites with enhanced dielectric permittivity and EMI shielding effectiveness. Journal of Macromolecular Science, Part A 2020, 57, 778-790.
6. Md Wasi Ahmad, Baban Dey, Abdullah Khamis Ali Al Saidi, Arup Choudhury. Functionalized‐graphene reinforced polyethersulfone nanocomposites with improved physical and mechanical properties. Polymer Composites 2020, 41 (10), 4104-4116.
7. B Dey, MW Ahmad, A Almezeni, G Sarkhel, DS Bag, A Choudhury. Enhanced electrical, mechanical and thermal properties of chemically modified graphene-reinforced polybenzimidazole nanocomposites. Bulletin of Materials Science 2020, 43 (1), 1-15.
8. W Ahmad, B Dey, AA Sammar, A Choudhury. In situ synthesis of graphene oxide in multi-walled carbon nanotube hybrid-reinforced polyetherimide nanocomposites with improved electrical, mechanical and thermal properties. Advanced Composite Materials 2020, 29 (6), 529-546.
9. S Anand, MW Ahmad, AKA Al Saidi, DJ Yang, A Choudhury. Polyaniline nanofiber decorated carbon nanofiber hybrid mat for flexible electrochemical supercapacitor. 2020, Materials Chemistry and Physics 254, 123480.
10. B Dey, MW Ahmad, A ALMezeni, G Sarkhel, DS Bag, A Choudhury. Enhancing electrical, mechanical, and thermal properties of polybenzimidazole by 3D carbon nanotube@ graphene oxide hybrid. Composites Communications 2020, 17, 87-96.
11. MW Ahmad, B Dey, G Sarkhel, DS Bag, A Choudhury. Exfoliated graphene reinforced polybenzimidazole nanocomposite with improved electrical, mechanical and thermal properties. 2020, Materials Chemistry and Physics 223, 426-433.
12. MW Ahmad, B Dey, G Sarkhel, DS Bag, A Choudhury. Exfoliated graphene reinforced polybenzimidazole nanocomposites with high dielectric permittivity at low percolation threshold. Journal of Molecular Structure 2020, 1177, 491-498.
13. MW Ahmad, B Dey, A ALMezeni, A Choudhury. Chemically-reduced graphene reinforced polyetherimide nanocomposites: dielectric behavior, thermal stability and mechanical properties. Materials Research Express 2020, 6 (11), 115316.
14. A Choudhury, B Dey, SS Mahapatra, DW Kim, KS Yang, DJ Yang. Flexible and freestanding supercapacitor based on nanostructured poly (m-aminophenol)/carbon nanofiber hybrid mats with high energy and power densities. Nanotechnology 2020, 29 (16), 165401.
15. Abhijit Jadhav, Govindaraj Mohanraj, Suseeladevi Mayadevi, Ashok Gokarn, Adsorption of heavy metal on active carbon derived from coconut leaves agro-waste, Chemistry & Chemical Technology, vol.14, p 553-562 (2020).
16. Subhash Magar, Govindaraj T Mohanraj, Sumit Kumar Jana, Chandrashekar Rode, Synthesis and characterization of supported heteropoly Acid: Efficient solid acid catalyst for glycerol esterification to produce biofuel, Inorganic and Nano-Metal Chemistry, Vol.50, p 1157-1165 (2020).
17. Atul Kumar, Niupama Prasad, Amit Kumar Tiwari and Dan Bahadur Pal. Thermal Kinetics and Its Behavior of Waste Amaltash Seeds and Peels Biomass Using Thermo Gravimetric Analysis. Intl. J. Engg. Sci. Adv. Research (2020) Vol. 6 (1), Pp 15-22.
18. Nirupama Prasad, Pranav Thakur, Dan Bahadur Pal; Cadmium removal from aqueous solution by jackfruit seed bio-adsorbent, Springer Nature Applied Sciences (2020) 2:1018127049 (2020).
19. S. Shekhar, M. Mukherjee and A.K.Sen, " Effect of Fe2O3 on the swelling, mechanical and thermal behaviour of NIPAM-based terpolymer" Poly. Bull. (2020).
20. S. Shekhar, M. Mukherjee and A.K.Sen, " Effect of surfactant on the swelling and mechanical behavior of NIPAM based terpolymer" Poly. Bull. 77, (2020), 4355-4379.
21. S. Basu, A.K.Sen., “Dehydration of glycerol with silica–phosphate-supported copper catalyst”, in Res. Chem. Int. 46, (2020), 3545.
22. Ghosh D, & Guha C. Numerical simulation of paraffin wax melting in a rectangular cavity using CFD. Indian Chemical Engineer 62: 3, 314-328 (2020).

2019

1. Some, S. et al. Effect of feed supplementation with biosynthesized silver nanoparticles using leaf extract of Morus indica L. V1 on Bombyx mori L. (Lepidoptera: Bombycidae). Sci. Rep. 9, 14839 (2019).
2. Roy, A., Bulut, O., Some, S., Mandal, A. K. & Yilmaz, M. D. Green synthesis of silver nanoparticles: biomolecule-nanoparticle organizations targeting antimicrobial activity. RSC Adv. 9, 2673–2702 (2019).
3. Abhijit Jadhav, Govindaraj Mohanraj, Ashok Gokarn, Susheeladevi Mayadevi, Ferets diameter estimation of activated carbon for effluent treatment application, Journal of the Indian Chemical Society, vol.96, pp 1067-1074 (2019).
4. S. Basu, A.K.Sen, M.Mukherjee, “Synthesis and performance evaluation of silica supported copper chromite catalyst for glycerol dehydration to acetol”, in J. Chem. Sci., 82, (2019),131.
5. Ghosh D, Guha C & Ghose J. Numerical Simulation on Heat Transfer Analysis in Zinc Solidification Process Using Enthalpy Porosity Method. International Journal of Advanced Trends in Computer Applications 1:1, 39-43 (2019).
6. Ghosh D, Guha C & Ghose J. Numerical investigation of paraffin wax solidification in spherical and rectangular cavity. Heat and Mass Transfer 55:12, 3547–3559 (2019).
7. Ghosh D, & Guha C. Numerical and experimental investigation of paraffin wax melting in spherical cavity. Heat and Mass Transfer 55:5, 1427–1437 (2019)

2018

1. Arup Choudhury, Ji-Hoon Kim, Susanta Sinha Mohapatra, Kap-Seung Yang and Duck-Joo Yang*. Flexible and freestanding supercapacitor based on nanostructured poly(m-aminophenol)/carbon nanofiber hybrid mats with high energy and power densities. Nanotechnology 2018 (Accepted).
2. Synthesis of Biomass Waste Derived Activated Carbon-NBRComposites for Automobile Application, Abhijit Jadhav, Govindaraj Thangaraj Mohanraj, Ashok Gokarn, Susheeladevi Mayadevi, Chemistry and Chemical Technology, Vol.12, Iss.2, pp 236-243 (2018)
3. A. S. Jadhav, G. T. Mohanraj, S. Mayadevi, A. N. Gokarn, Synthesis and Influence of Feret diameter on particle morphology of activated carbon derived from agrowastes, Asian Journal of Materials Chemistry,  Vol.3,iss.1-2, pp 28-36 (2018)
4. Debasree Ghosh, Chandan Guha, Numerical and Experimental Investigation of Paraffin Wax Melting In Spherical Cavity. Heat and Mass Transfer 2018 (Accepted).
5. D. B. Pal, R. Lavania, P. Srivastava, P. Singh, S. Madhav, P. K. Mishra. Photo-catalytic degradation of methyl tertiary butyl ether from wastewater using CuO/CeO2 composite nanofiber catalyst. J. of Env. Chemical Engg. 6 (2018) 2577-2587

2017

1. Improving coating properties of shellac-epoxidised-novolac blends with melamine formaldehyde resin, Ansari, M.F.; Sarkhel, G., Pigment and Resin Technology Volume: 46 Issue: 2 Pages: 92-99 
2. Studies on Viscoelastic, Thermal and Morphological Properties of Vinyl Ester - Mixed Diluents System, Jagesh Kumar Ranjan, Raghu Raja Pandiyan Kuppusamy, S.Goswami, Archives of Metallurgy and Materials, 1733-3490, 2017,Accepted Issue 3, Volume 63
3. Vibha Shree, A K Sen, “Study of thermal and flame behavior of phosphorus based silica for epoxy composites”, J.Sol.Gel. Sci. Tech. Impact Factor 1.575 ISSN:0928-0707 (Article in Press)
4. C. Acharya, C.R.Panda, P.K.Bhaskara, A.Sasmal, S.Shekhar, A.K.Sen, "Physicochemical and anti microbial properties of sodium alginate/gelatin based silver nanoformulations", Poly. Bull. 74(3), (2017), 689-706. Impact Factor 1.43 ISSN 0170-0839.
5. Arup Choudhury, Ji-Hoon Kim, Susanta Sinha Mohapatra, Kap-Seung Yang and Duck-Joo Yang*. Nitrogen-enriched porous carbon nanofiber mat as efficient flexible electrode material for supercapacitors. ACS Sustainable Chemistry Engineering 2017, 5, 2109−2118.
6. Sushil K. Verma, Arup Choudhury*, Pradip Kar. Synthesis, characteristics and aliphatic alcohol sensing behavior of poly(m–aminophenol)/sulfonic acid-functionalized multi-walled carbon nanotube composite. ChemistrySelect 2017, 2 (13), 3917-3924.
7. Sushil K. Verma, Arup Choudhury*, Pradip Kar. Selective sensing of ethanol by poly(m-aminophenol)/amine groups functionalized multi-walled carbon nanotube composite. Sensors letters 2017, 15, 1-9.
8. Evaluation of Kinetic Models of Lead Uptake from Wastewater by ActivatedCarbon Derived from Coconut Leaves, A. S. Jadhav and G. T. Mohanraj, Nature Environment and Pollution Technology, vol.16, p 189-197 (2017)
9. Solid Acid Catalyzed Etherification of Glycerol to potential fuel additives, Subhash Magar, Sumit Kamble, Govindaraj Thangaraj Mohanraj, Sumit Kumar Jana, Chandrashekar Rode, Energy and Fuels, ACS Publications, vol.31, p 12272-12277 (2017)
9. Sumit Kumar Jana, and Sudip Kumar Das" Tapered Bubble Column using pseudoplastic non-Newtonian Liquids – Empirical correlation for pressure drop J. Ch and Chem. Tech. 11(3) 327-332(2017). (ISSN:1996-4196)
11. Subhash Magar, Sumit Kamble, Govindraj Thangaraj Mohanra, Sumit Kumar Jana, and Chandrashekhar Rode “Solid Acid Catalyzed Etherification of Glycerol to potential fuel additives” Energy & Fuels, 32,12272-12277(2017). (ISSN:0887-0624).

2016

1. Controlled sulfonation of poly(ether sulfone) using phthalic anhydride as catalyst and its membrane performance for fuel cell application,   Rahaman, S.J.; Mukherjee, M.; Sarkhel, G. Carbon - Science and Technology Volume: 8 Issue: 3 Pages: 165-174 
2. Effect of stoichiometric ratios for synthesized epoxy phenolic novolac (EPN) resins on their physicochemical, thermomechanical and morphological properties, Das, A.; Sarkhel, G., Pigment and Resin Technology Volume: 45 Issue: 4 Pages: 265-279
3. Morphological, Dynamic Mechanical, Creep and Weathering Behavior of Carbon Nanotube-Reinforced 50/50 ASA/Zn-Ionomer Blend, Datta, P.; Guha, C.; Sarkhel, G. Polymer - Plastics Technology and Engineering Volume: 55 Issue: 5 Pages: 453-462.
4. Antibiotic Loading and release studies of LSMO nanoparticles embedded in an acrylic polymer, Sonali Biswas, Sunita Keshri, Sudipta Goswami, Jinu Isaac, Swastika Ganguly & Nikolai Perov, Phase Transitions, 87,136-147,2016,Taylor Francis,ISSN:0141-1594(Print)1029-0338(Online)
5. S. Shekhar, M. Mukherjee and A.K.Sen, " Swelling thermal and mechanical properties of NIPAM based terpolymeric hydrogel" Poly. Bull. 73(1), (2016), 125 Impact Factor 1.43 ISSN 0170-0839. 
6. P. Swain, A. Sasmal, S. K. Nayek, S. K. Barik, S. S. Mishra, K. D. Mohapatra, S. K. Swain, J. N. Saha, A. K. Sen, P. Jayasankar, "Evaluation of selected metal nanoparticles on hatching and survival of larvae and fry of Indian major carp, rohu (Labeo Rohita)" Aquaculture Research, 47(2), (2016), 498-511. Impact Factor: 1.464, ISSN: 1365-2109 (Onlne).
7. Ch. Ashok K Varma • R.K. Koley • Sanjay Singh •A K Sen• K. Jayaram Kumar, "Homogeneous carboxymethylated orange pulp cellulose: Characterization and evaluation in terms of drug delivery" Int. J. Bio. Mac., 93,(2016), 1141-1146. Impact Factor 3.657, ISSN: 0141-8130.
8. Arup Choudhury, Ji-Hoon Kim, Kap-Seung Yang and Duck-Joo Yang*. Facile synthesis of self-standing binder-free vanadium pentoxide-carbon nanofiber composites for high-performance supercapacitors. Electrochimica Acta 2016, 213, 400-407.
9. Sushil K. Verma, Pradip Kar, Manindra Kumar, Arup Choudhury*. Core-shell functionalized MWCNT/poly(m-aminophenol) nanocomposite with large dielectric permittivity and low dielectric loss. Polymers for Advanced Technologies. 2016, 27 (12), 1596-1603.
10. Abhijit Jadhav, Govindaraj Mohanraj, Synthesis of activated carbon from cocos nucifera leaves agrowaste by chemical activation method, Chemistry and Chemical Technology, vol.10, p.201-208, (2016)
11. A. S. Jadhav, G. T. Mohanraj, Synthesis and characterization of chemically activated carbon derived from arecanut shell, Carbon-Science and Technology, vol.8, iss.1, p.32-39, (2016).
12. Sumit Kumar Jana and Sudip Kumar Das "Effect of gas hold up in tapered bubble columns with same taper angle using water: Columns diameter and liquid height " Chem. Xpress,9(6), 42-47(2016). (ISSN:2320-1967).

2015

1. Mechanical, rheological, and electrical properties of multiwalled carbon nanotube reinforced ASA/Na-ionomer blend, Datta, P.; Guha, C.; Sarkhel, G.Journal of Applied Polymer Science.
2. Mechanical, Rheological, and Electrical Properties of Multiwalled Carbon Nanotube Reinforced Nanocomposites of 50/50 Acrylonitrile-Styrene-Acrylate/Zn⁺² poly(ethylene-co-methacrylic acid) Ionomer Blend, Datta, P.; Guha, C.; Sarkhel, G., Polymer - Plastics Technology and Engineering Volume: 54 Issue: 16 Pages: 1753-1763
3. Multi-objective optimization of wear properties for Kaolin reinforced epoxy composite with Grey-Taguchi technique, Prakash, A.; Sarkhel, G.; Kumar, K., International Journal of Applied Engineering Research Volume: 10 Issue: 55 Pages: 3859-3864
4. Multi-objective strength optimization for kaolin reinforced epoxy composite using grey-taguchi approach, Prakash, A.; Sarkhel, G.; Kumar, K., International Journal of Applied Engineering Research Volume: 10 Issue: 55 Pages: 3673-3677
5. Strength Optimization for Kaolin Reinforced Epoxy Composite Using Taguchi Method, Prakash, A.; Sarkhel, G.; Kumar, K., Materials Today: Proceedings Volume: 2 Pages: 2380-2388
6. Study of mechanical properties of kaolin reinforced epoxy composite, Prakash, A.; Sarkhel, G.; Kumar, K., International Journal of Applied Engineering Research Volume: 10 Issue: 11 Pages: 10080-10084
7. Study of mechanical, thermal, morphological, and process rheology of acrylonitrile styrene acrylate (ASA)/ Na⁺ poly(ethylene-co-methacrylic acid) ionomer blend, Datta, P.; Guha, C.; Sarkhel, G., Polymer Engineering and Science Volume: 55 Issue: 7 Pages: 1571-1579.
8. Thermal, dynamic mechanical, and creep behavior of carbon nanotube reinforced ASA/Na-ionomer blend, Datta, P.; Guha, C.; Sarkhel, G., Polymers for Advanced Technologies
9. Arup Choudhury, Jeliza S. Bonso, Melissa Wunch, Kap Seung Yang, John P. Ferraris and Duck J. Yang. In-situ synthesis of vanadium pentoxide nanofibre/exfoliated graphene nanohybrid and its supercapacitor applications. Journal of Power Sources 2015, 287, 283-290.
10. Sushil K Verma, Pradip Kar, Duck J. Yang, Arup Choudhury*. Poly(m-aminophenol)/ functionalized multi-walled carbon nanotube nanocomposite based alcohol sensors. Sensors & Actuators B: Chemical 2015, 219, 199-208.
11. Sushil K Verma, Pradip Kar, Arup Choudhury. Interaction of multi-walled carbon nanotube with poly(m-aminophenol) in their processable conducting nanocomposite. Physica Status Solidi A: Applications and Materials Science 2015, 212 (9), 2044–2052.
12. Magar Subhash B., Jadhav A S, Sumit kumar Jana, G.T Mohanraj, Microbial production of Green polymer Xanthan Gum from Xanthomonas Campestris, International Journal of Scientific & Engineering Research, Vol. 6, p.1045, (2015)
13. Sumit Kumar Jana, Asit Baran Biswas and Sudip Kumar Das, "ANN applicability in gas holdup prediction in tapered bubble columns using non-Newtonian pseudoplastic liquids” Chem. Xpress, 8(2), 102-111(2015). (ISSN:2320-1975).
14. Sumit Kumar Jana and Sudip Kumar Das, " Effect of gas holdup enhancement using aqueous solutions of electrolyte in taper bubble column"Chem. Xpress,8(1), 42-47(2015). (ISSN:2320-1975).
15. Magar subhash B. , Jadhav A. S. , Sumit Kumar Jana, G.T. Mohanraj, "Microbial production of green polymer Xanthan gum from Xanthomonas campestris" Int. J. Sci. Eng. Res., 6(8),1045-1052(2015). (ISSN:2229-5518)
16. Magar subhash B. , Jadhav A. S. , Sumit Kumar Jana, "Sustainable production of microbial polysaccharide xanthan gum from supplemental subststrate" Int. J. Sci. Res.,4(8),473-475(2015). (ISSN:2277-8179)

2014

1. Coating properties of shellac modified with synthesised epoxidised-novolac resin, Ansari, M.F.; Sarkhel, G.; Goswami, D.N.;  Pigment and Resin Technology Volume: 43 Issue: 5 Pages: 314-322
2. Effect of Na-ionomer on dynamic rheological, dynamic mechanical and creep properties of acrylonitrile styrene acrylate (ASA)/Na+1 poly (ethylene-co-methacrylic acid) ionomer blend, Datta, P.; Guha, C.; Sarkhel, G. Polymers for Advanced Technologies
3. Effect of Zn+2 Poly(ethylene-co-methacrylic acid) Ionomer on Mechanical Properties, Thermal Properties, Morphology and Process Rheology of Acrylonitrile Styrene Acrylate (ASA) Terpolymer, Datta, P.; Guha, C.; Sarkhel, G. Polymer - Plastics Technology and Engineering Volume: 53 Issue: 1 Pages: 80-89
4. Study of dynamic rheological, dynamic mechanical and creep properties of acrylonitrile styrene acrylate (ASA)/Zn+2poly(ethylene-co-methacrylic acid) ionomer blend, Datta, P.; Guha, C.; Sarkhel, G., Journal of Macromolecular Science, Part A: Pure and Applied Chemistry Volume: 51 Issue: 10 Pages: 820-830
5. Morphology and Mechanical Properties of Sisal Fibre /Vinyl Ester Composites, Kalpana Mahato, Apoorva Ambarkar, Sudipta Goswami, Fibres and Polymers, Springer, vol.15,6,1310-1320,2014(IF-0.912),ISSN :1229-9197 (Print)
6. PMMA/PHEA Interpenetrating Network Embedded with Iron Oxide Nanoparticles for Drug Delivery Applications, Sudipta Goswami , Kalpana Kiran, International Journal of Polymeric materials and Polymeric Biomaterials, Taylor Francis, 63,18,963-970,2014 (IF-1.515), ,ISSN:0091-4037 (Print)
7. FTIR Analysis on Alkali Treated Sisal Fibre and Characterization on Mechanical Properties of Sisal-Vinyl Ester Composites, K.Mahato, S. Goswami, Advanced Science Letters, 20,3-4,2014,pages 825-827, American science Publishers
8. S. Shekhar, M. Mukherjee and A.K.Sen, " Synthesis and characterization of Thermoresponsive terpolymer for protein separation" Int. J. Poly. Mat. and Poly. Biomat.(2014), 63, 389-397. Impact Factor: 1.515 ISSN 0091-4037 (Print), 1563-535X (Online)
9. •P. Swain, S.K. Nayak, A. Sasmal, T. Behera, S.K. Barik, S.K. Swain, S.S. Mishra, A.K. Sen, J.K. Das, P. Jayasankar, "Antimicrobial activity of metal based nanoparticles against microbes associated with diseases in aquaculture", World Journal of Microbiology and Biotechnology, (2014), 30, 2491- 2502. Impact Factor: 1.658, ISSN: 0959-3993 (print version) ISSN: 1573-0972 (electronic version)
10. Jana, S. K., Biswas, A. B. and Das, S. K. Pressure drop in tapered bubble columns using non-Newtonian pseudoplastic liquid - Experimental and ANN prediction. Can. J. Chem. Eng., 2014, 92, 578-584.
11. Jana, S. K., Biswas, A. B. and Das, S. K. Gas holdup in tapered bubble column using pseudoplastic non-Newtonian liquids. Korean J. Chem. Eng., 2014, 31, 574-581.
12. Arup Choudhury*. Preparation and characterization of nanocomposites of poly-p-phenylene benzobisthiazole with graphene nanosheets. RSC Advances 2014, 4 (17), 8856-8866.
13. Arup Abdelaziz Rahy, Changheon Kim, Sungwoo Ryu, Jaewon Hwang, Soon Hyung Hong and Duck J. Yang. A simple/green process for the preparation of composite carbon nanotube fibers/yarns. RSC Advances 2014, 4, 43235-43240. 
14. Arup Choudhury*. Carboxyl-functionalized MWCNT doped poly(o-toluidine) nanohybrids: Synthesis, characterization with AC electrical and dielectric properties. Synthetic Metals 2014, 188, 13-20.
15. Sumit Kumar Jana, Asit Baran Biswas and Sudip Kumar Das, "Pressure drop in tapered bubble columns using non-Newtonian pseudoplastic liquid - Experimental and ANN prediction"  Can. J. Chem. Eng., 92(3), 578-584 (2014). (ISSN:1939-019X)
16. Sumit Kumar Jana, Asit Baran Biswas and Sudip Kumar Das, "Gas holdup in tapered bubble column using pseudoplastic non-Newtonian liquids" Korean J. Chem. Eng., 31(4), 574-581 (2014). (ISSN:1975-7220).
17. Sumit Kumar Jana, Asit Baran Biswas and Sudip Kumar Das, "Effect of taper angle on gas holdup in tapered bubble columns using non-Newtonian pseudoplastic liquids," Chem. Xpress, 6(4),116-120(2014). (ISSN:2320-1975).

2013

1. Changes in the properties of shellac on blending with rosin, effect on storage, Ansari, M.F.; Sarkhel, G.; Goswami, D.N.; , Pigment and Resin Technology Volume: 42 Issue: 4 Pages: 256-263
2. Effect of compatibilizer on the dynamic mechanical and electrical properties of kaolin clay reinforced EPDM rubber, Sarkhel, G.; Manjhi, S., Sains Malaysiana Volume: 42 Issue: 4 Pages: 495-501 
3. Effect of polyvinylpyrrolidone on separation performance of cellulose acetate-polysulfone blend membranes, Kumari, A.; Sarkhel, G.; Choudhury, A., Journal of Macromolecular Science, Part A: Pure and Applied Chemistry Volume: 50 Issue: 7 Pages: 692-702
4. Effect of temperature on coating properties of shellac-novolac blends, Ansari, M.F.; Sarkhel, G.; Goswami, D.N.;  Pigment and Resin Technology Volume: 42 Issue: 5 Pages: 326-334
5. Fabrication, characterization, and evaluation of Luffa cylindrica fiber reinforced epoxy composites, Saw, S.K.; Purwar, R.; Nandy, S.;, J Ghosh, G Sarkhel, BioResources Volume: 8 Issue: 4 Pages: 4805-4826 
6. Preparation and characterization of flexible polybenzoxazine-LLDPE composites, Rajput, A.B.; Rahaman, S.J.; Sarkhel, G., N R Ghosh, Designed Monomers and Polymers Volume: 16 Issue: 2 Pages: 177-184
7. Preparation, Characterization and Properties of Flexible Magnetic Nanocomposites of NiFe2O4-polybenzoxazine-LLDPE, Rajput, A.B.; Rahaman, S.J.; Sarkhel, G.; N R Ghosh, Polymer - Plastics Technology and Engineering Volume: 52 Issue: 11 Pages: 1097-1105
8. Synthesis, characterization, and properties of flexible magnetic nanocomposites of cobalt ferrite-polybenzoxazine-linear low-density polyethylene, Rajput, A.B.; Rahaman, S.J.; Sarkhel, G.; N R Ghosh, Journal of Applied Polymer Science Volume: 128 Issue: 6 Pages: 3726-3733 
9. Study of Drug Transport Phenomenon of Acrylic IPNs Embedded with Iron Oxide Nanoparticles, Kalpana Kiran, Atal Behari Panda, Partha Pratim Sharma, Indrani Banerjee, Sudipta Goswami, International Journal of Polymeric materials and Polymer Biomaterials, 62, 9, 509-516,2013(IF-1.515),Taylor-Francis,ISSN:0091-4037 (Print)
10. Stiffness and Wettability-Dependent Myoblast Cell Compatibility of Transparent Poly (vinyl alcohol) Hydrogels, Siddhi Gupta, Bikramjit Basu, Greeshma T., Sudipta Goswami Arvind Sinha, Journal of Biomedical Material Research :part b:Applied Biomaterials,  101B (2) 346-354, 2013 (IF-2.308) Wiley-Blackwell, Online ISSN: 1552-4981
11. Mechanical and Morphological Properties of Vinyl Ester /Guar Gum Treated Sisal Fibre Composites, Jagesh Ranjan, Kalpana Mahato, Sudipta Goswami, International Journal of Engineering Research and Technology,ISSN:2278-0181,ISO 3297:2007,Vol.2, 12,2013(IF-1.76),ESRSA publication
12. Sreejith K. R., A. K. Sen, “A new high temperature Lithium para-toluene sulfonate (LIPTSA) salt for rechargeable batteries”, Int. J. Poly. Mat. and Poly. Biomat. 62, (2013), 145-149.  Impact Factor: 1.515 ISSN 0091-4037 (Print), 1563-535X (Online).
13. Arup Choudhury, Jeong-Hyun Park and Soo-Young Park. Effect of HI-reduction of graphene oxide on electrical properties of BBL/graphene nanocomposites. Macromolecular Research 2013, 21 (11), 1254-1262.
14. Arup Choudhury Jeong-Hyun Park and Soo-Young Park. Effect of HI-reduction of graphene oxide on electrical properties of BBL/graphene nanocomposites. Macromolecular Research 2013, 21 (11), 1254-1262.
15. Prodip Kar and Arup Choudhury*. Carboxylic acid functionalized multi-walled carbon nanotube doped polyaniline for chloroform sensors. Sensors & Actuators B: Chemical 2013, 183, 25-33.
16. Prodip Kar and Arup Choudhury*. Electrical and dielectric properties of polyaniline doped with carboxyl-functionalized multi-walled carbon nanotube. Advances in Polymers Technologies 2013, 32 (S1), E760-E770.

2012

1. Effect of butylated melamine formaldehyde resin on coating properties of shellac - rosin blends, Asia Pacific Coatings Journal ,  F Ansari, D N Goswami, B Baboo, G Sarkhel
2. Effect of layering pattern on the physical, mechanical, and thermal properties of jute/bagasse hybrid fiber-reinforced epoxy novolac composites, Saw, S.K.; Sarkhel, G.; Choudhury, A., Polymer Composites Volume: 33 Issue: 10 Pages: 1824-1831
3. Effect of tetraethyl orthosilicate on the structural, thermal, and morphological properties of a cellulose acetate membrane, Kumari, A.; Choudhury, A.; Sarkhel, G., Progress in Rubber, Plastics and Recycling Technology Volume: 28 Issue: 3 Pages: 111-126
4. Effect of zirconium phosphate on structural, thermal, and electrical properties of polyether sulfone (PES) membrane, Rahaman, S.K.J.; Mukherjee, M.; Sarkhel, G., International Journal of Polymeric Materials and Polymeric Biomaterials Volume: 61 Issue: 9 Pages: 655-668
5. Preparation and characterization of chemically modified Jute-Coir hybrid fiber reinforced epoxy novolac composites, Saw, S.K.; Sarkhel, G.; Choudhury, A., Journal of Applied Polymer Science Volume: 125 Issue: 4 Pages: 3038-3049
6. Preparation and characterization of polyvinylpyrollidone incorporated cellulose acetate membranes for ultrafiltration of metal ion, Kumari, A.; Sarkhel, G.; Choudhury, A., Journal of Applied Polymer Science Volume: 124 Issue: SUPPL. 1
7. Simultaneous effect of organoclay and controlled peroxide curing on dielectric properties and flammability of LLDPE/EMA blend Borah, J.S.; Chaki, T.K.; Sarkhel, G., Polymer Bulletin Volume: 68 Issue: 9 Pages: 2255-2267
8. Sequential Interpenetrating Polymer Networks of Novolac Resin and Poly (2-ethylhexylacrylate)-Thermal, Mechanical and Morphological study, S.Goswami, S.K.Manjhi Journal of Applied Polymer Science, 123, 3007-3016, 2012 (IF-1.395) Wiley-Blackwell, Online ISSN: 1097-4628.
9. Application of Kissinger Analysis to the Glass Transition and Study of the Thermal Degradation Kinetics of Phenolic-Acrylic IPNs, S. Goswami, K.Kiran, Bulletin of Materials Science,657-664,35,2012(IF-0.584)Springer,ISSN: 0250-4707 (Print)
10. A Combined Effect of Freeze-Thaw Cycles and Polymer Concentration on the Structure and Mechanical Properties of Transparent PVA Gels, Siddhi Gupta, Sudipta Goswami, Arvind Sinha, Biomedical Materials, 7,015006,2012 (IF-2.174), IOP Publishing Ltd., ISSN: 1748-6041(Print)
11. S. Shekhar, M. Mukherjee and A.K.Sen, " Synthesis characterization and protein separation efficiency of N-Isopropylacrylamide-co-N-Tertiary butylacrylamide-co-Acrylamide based hydrogels" Iran. Polym. J. (2012), 21(12), 895-905. Impact Factor 1.422. Print ISSN: 1026-1265. ON-LINE ISSN: 1735-5265
12. •S. K. Ghosh,  Gulzar Waghoo, K. Rajesh Kumar, Faisal Ansari, Kapil Yadav, A. K. Sen, “Synergistic effect of surface functionalized calcite with binder on the epoxy performance” Progress in Organic Coatings 75, (2012),14-19. Impact Factor 2.858, ISSN: 0300-9440.
13. •A. Singh, K. Yadav, A. K. Sen, “Sal (Shorea Robusta) Leaves Lignin Epoxidation and Its use in Epoxy Based Coatings”, Am. J. Polymer Sci. 2(1), (2012), 14-18. ISSN 2163-1352,
14. •A. K. Sen, S. Roy, V. A. Juvekar, “On the Importance of Puri?cation of Sodium Polystyrene Sulfonate” ISRN Analytical Chemistry”, 2012, 5.
15. •S. Shekhar, M. Mukherjee and A.K.Sen, " Studies on thermal and swelling properties of Poly (N-Isopropylacrylamide-co-2-Hydroxyethylacrylate) based hydrogels" Adv. Mat. Res. 1(4), (2012), 267-282. ISSN: 2234-0912.
16. Arup Choudhury Hun Wook Ha, Tasheen Kamal, Dong-Hun Kim and Soo-Young Park. Effect of chemical modification of graphene on mechanical, electrical and thermal properties of polyimide/graphene nanocomposites. ACS Applied Materials & Interfaces 2012 4 (9), 4623–4630.
17. Jeong-Hyun Park, Arup Choudhury, B.L. Farmer, T.D. Dang Soo-Young Park. Chemically modified graphene/polybenzimidazobenzophenanthroline nanocomposites with improved electrical conductivity. Polymer 2012, 53 (18), 3937-3945.
18. Arup Choudhury*. Preparation, characterization and dielectric properties of polyetherimide nanocomposites containing surface-functionalized BaTiO3 nanoparticles. Polymer International 2012, 61 (5), 696-702.

2011

1. Dynamic mechanical analysis of randomly oriented short bagasse/coir hybrid fibre-reinforced epoxy novolac composites, Saw, S.K.; Sarkhel, G.; Choudhury, A., Fibers and Polymers Volume: 12 Issue: 4 Pages: 506-513
2. Effect of maleic anhydride grafted ethylene propylene diene monomer (MAH-g-EPDM) on the properties of kaolin reinforced EPDM rubber, Manjhi, S.; Sarkhel, G., Journal of Applied Polymer Science Volume: 119 Issue: 4 Pages: 2268-2274
3. Surface modification of coir fibre involving oxidation of lignins followed by reaction with furfuryl alcohol: Characterization and stability, Saw, S.K.; Sarkhel, G.; Choudhury, A., Applied Surface Science Volume: 257 Issue: 8 Pages: 3763-3769
4. Synthesis of Magnetically Active Interpenetrating Polymer Network for Drug Release, S.Goswami,K.Kiran,A.B.Panda,P.P.Sharma,S.Mahapatra,S.V.Bhoraskar,I.Banerjee,International Journal of Nanodimension, 2(1):37-48, summer 2011,ISSN:2008-8868(Print)
5. B.Bharaniraja, Jayaram Kumar, C.M. Prasad, A.K. Sen, “Modified Katira gum matrix tablet for colon targeted drug delivery of Ibuprofen” J.Appl.Pol.Sci. 119, (2011), 2644-2651. ISSN: 1097-4628. Impact Factor-1.86 ISSN: 1097-4628
6. B.Bharaniraja, Jayaram Kumar, C.M.Prasad, A.K.Sen, “Different approaches of Katira Gum formulations for Colon Targetting”, Int. J. Bio. Mac., 49(3), (2011), 305-310. Impact Factor 3.671, ISSN: 0141-8130.
7. Arup Choudhury*. Synthesis and characterization of poly(o-toluidine)/functionalized multi-walled carbon nanotubes nanocomposites with improved electrical conductivity. Materials Chemistry and Physics 2011, 130 (1-2), 231-236.
8. Arup Choudhury and Prodip Kar. Doping effect of carboxylic acid group functionalized multi-walled carbon nanotube on polyaniline. Composites Part B 2011, 42 (6), 1641-1647.
9. Arup Choudhury and Prodip Kar. Doping effect of carboxylic acid group functionalized multi-walled carbon nanotube on polyaniline. Composites Part B 2011, 42 (6), 1641-1647.

2010

1. Dynamic vulcanization of polyethylene-based thermoplastic elastomer blends, Sarkhel, G.; Choudhury, A., Journal of Applied Polymer Science Volume: 115 Issue: 1 Pages: 376-384 
2. High-density polyethylene-ethylene propylene rubber-based thermoplastic elastomer: A mechanical modeling, thermal and rheological study, Sarkhel, G.; Aswini, B.; Banerjee, A., Polymer - Plastics Technology and Engineering Volume: 49 Issue: 10 Pages: 1049-1054
3. Polyethersulfone membranes: The effect of sulfonation on the properties, Unnikrishnan, L.; Nayak, S.K.; Mohanty, S.; G Sarkhel, Polymer - Plastics Technology and Engineering Volume: 49 Issue: 14 Pages: 1419-1427 
4. K. Sen and Sandeep Kumar, “Coir fiber based fire retardant nano filler for epoxy composites”, J. Thermal Analysis and Calorimetry, 101, (2010), 265-271. Impact Factor 1.953, ISSN: 1388-6150 (print version) ISSN: 1588-2926 (electronic version)
5. Anu Anna and A. K. Sen, “Thermal and swelling studies of poly(acrylamide) hydrogel” J.Appl.Pol.Sci. 117, (2010), 2795-2802. Impact Factor-1.86 ISSN: 1097-4628
6. Arup Choudhury*. Dielectric and piezoelectric properties of polyetherimide/BaTiO3 nanocomposites. Materials Chemistry and Physics 2010, 121 (1-2), 280-285.

2009

1. Chemically modified carbon black filled ethylene-Propylene-Diene rubber composites: Mechanical and dynamic mechanical study, Sini, N.K.; Choudhury, A.; Sarkhel, G., Progress in Rubber, Plastics and Recycling Technology Volume: 25 Issue: 1 Pages: 29-44 
2. Arup Choudhury*. Polyaniline/silver nanocomposites: dielectric properties and ethanol vapour sensitivity. Sensors & Actuators B: Chemical 2009, 138 (1), 318-325.
3. Arup Choudhury*, Prodip Kar, Mandira Mukherjee and Basudam Adhikari. Polyaniline/ silver nanocomposite based acetone vapour sensor. Sensor Letters 2009, 7 (4), 592-598.

2008

1. Dynamic mechanical and thermal properties of PE-EPDM based jute fiber composites, Sarkhel, G.; Choudhury, A., Journal of Applied Polymer Science Volume: 108 Issue: 6 Pages: 3442-3453
2. Polyamide 66/EPR-g-MA blends: Mechanical modeling and kinetic analysis of thermal degradation, Choudhury, A.; Balmurulikrishnan, A.; Sarkhel, G., Polymers for Advanced Technologies Volume: 19 Issue: 9 Pages: 1226-1235 
3. Arup Choudhury*. Isothermal crystallization and mechanical behavior of ionomer treated jute/HDPE composites. Materials Science and Engineering Part A 2008, 491, 492-500.

2007

1. Effect of compatibiliser and fibre content on jute fibre reinforced HDPE/EPDM: A dynamic mechanical and thermal study, Sarkhel, G.; Banerjee, A.; Bhattacharya, P., Polymers and Polymer Composites Volume: 15 Issue: 3 Pages: 241-247
2. Microstructural investigation of alumina implanted with 30 keV nitrogen ions, Shikha, D.; Jha, U.; Sinha, S.K.; G Sarkhel, Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms Volume: 264 Issue: 2 Pages: 254-258.
3. Arup Choudhury*, Sandeep Kumar and Basudam Adhikari. Recycled milk pouch and virgin LDPE-LLDPE based coir fibre composites. Journal of Applied Polymer Science 2007, 106 (2), 775-785.
4. Arup Choudhury and Basudam Adhikari. Recycled milk pouch and virgin LDPE-LLDPE blend based jute fibre composites. Polymer Composites 2007, 28 (1), 78-88.
5. Arup Choudhury and Basudam Adhikari. Dynamic vulcanization of recycled milk pouch (LDPE-LLDPE)-EPDM blends by dicumyl peroxide. Polymer International 2007, 56 (10), 1213-1223.

2006

1. Effect of compatibiliser and fibre content on jute fibre reinforced HDPE/EPDM composites,  Sarkhel, G.; Banerjee, A.; Bhattacharya, P., Polymers and Polymer Composites Volume: 14 Issue: 6 Pages: 603-610 
2. Rheological and mechanical properties of LDPE/HDPE blends, Sarkhel, G.; Banerjee, A.; Bhattacharya, P., Polymer - Plastics Technology and Engineering Volume: 45 Issue: 6 Pages: 713-718 
3. Arup Choudhury, Mandira Mukherjee and Basudam Adhikari. Recycling of poly (ethylene terephthalate)-polyethylene post consumer oil pouches using compatibiliser. Polymer & Polymer Composites 2006, 14 (6), 549-560.
4. Arup Choudhury, Mandira Mukherjee and Basudam Adhikari. Recyclingof nylon 6/ polyethylene waste oil pouches using compatibilizers. Indian Journal of Chemical Technology 2006, 13, 233-241.

2005

1. Effect of Maleic Anhydride Grafted HDPE on Jute Fibre Reinforced Polyethylene/EPDM Composites: Part-I Mechanical & Morphological Study, Sarkhel, G.; Banerjee, A.; Bhattacharya, P, Journal of Plastic Technology 
2. Arup Choudhury, Mandira Mukherjee and Basudam Adhikari. Thermal stability and degradation of the post Use reclaim milk pouches during multiple extrusion cycles. Thermochimica Acta 2005, 430, 87-94.
3. Arup Choudhury, Mandira Mukherjee and Basudam Adhikari. Mixture of recycled milk pouches with a virgin LDPE-LLDPE blend. Progress in Rubber, Plastics and Recycling Technology 2005, 21 (3), 219-230.
4. Arup Choudhury, Mandira Mukherjee and Basudam Adhikari. Recycling of edible oil pouches: Composition and thermal Stability. Progress in Rubber, Plastics and Recycling Technology 2005, 21 (2), 117-138.