i
NGME
-2027
Organised by Department of Mechanical Engineering,
Birla Institute of Technology, Mesra, Ranchi-835215, Jharkhand, India.
👉 Click here 👉 PAY Registration Fee
The 1stInternational Conference on Next Gen Mechanical Engineering (iNGME-2027) aims to bring together leading academic scientists, researchers, and research scholars to exchange and share their experiences and research results on all aspects of Next Generation Mechanical Engineering.
It also provides a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered and solutions adopted.
The core objectives of the International Conference on NextGen Mechanical engineering (iNGME-2027) typically include: (1)Showcasing Transformative Innovations : To present original research and state-of-the-art methodologies regarding emerging trends like additive manufacturing, digital twins, AI in manufacturing, and green mobility. It enhances the knowledge and technical competence of participants in the multidisciplinary areas with core focus in Mechanical Engineering application. (2)Bridging Academia and Industry : To connect researchers and academic institutions directly with industry leaders and policymakers, facilitating real-world application of cutting-edge mechanical theories. It will Sensitize participants to the economic, environmental, and societal implications crafting awareness about the economic and societal benefits of distinct Mechanical systems, with emphasis on energy efficiency, cost-effectiveness, sustainability, and performance optimization in industrial applications. (3)Fostering Global Networking : To build an international community where scholars, engineers, and students can exchange ideas, discuss best practices, and form cross-border partnerships for future development. Also it identify contemporary challenges in Mechanical system design and feasible solutions through advanced modeling, simulation, optimization techniques, and case studies relevant to real-world applications. (4)Promoting Sustainable Engineering : To focus on eco-friendly and energy-efficient technologies, encouraging designs and manufacturing processes that align with global environmental sustainability frameworks and climate goals. (5)Shaping Future Research Directions : To identify technological gaps in modern engineering and inspire graduate students and researchers to pursue novel, high-impact research questions.
Birla Institute of Technology, Mesra, Ranchi
Established (1955) with a vision for academic excellence, the Department of Mechanical Engineering at BIT Mesra Ranchi includes globally competitive academic programs (B.Tech, M.Tech, PhD) and is renowned for state-of-the-art teaching & research facilities with over 20 specialized laboratories include domains of heat transfer, HVAC, hydraulic machines, tribology, internal combustion engines, aerodynamics, Automation, dynamics of machines, strength of materials, renewable energy, etc., and equipped with modern CAD/CAM and simulation softwares, DAQs, modern instruments, etc..
Please follow the scope of the Tracks before submission in iNGME-2027
Thermal, Fluid, Nuclear, Energy, & Environment Management
▋ Thermal: Experimental & Computational studies of Enhancement, Thermal management, Waste Heat Recovery, Power plants, Combustion systems and HVAC systems, Heat Tranfer Technoques & Applications, Heat Exchangers, Porous media, etc
▋ Nuclear Thermal Hydraulics: Nuclear Fission, Power Generation Systems and Technologies, Nuclear Fusion, LWR,PWR,BWR,HWR-CANDU,SMR,SCR, FNR,MSR,etc Nuclear Waste Management, Safety and Policy, Emerging Research
▋ Fluid: Fluid flow, Dynamic Responses, fluid structures, Boundary-layer flows,Separated flows, Pulsating flows, Supersonic, hypersonic flows, Fluids energy management, CFD, FEA, and Experimental Methods, Flow measurements using PIV, PDA/PDPA, LDV, HWA, Holography etc, Nanofluidics, Microfluids, Multiphase flow, porous media, solidification, melting, evaporation, condensation, Plasma Physics and Cryogenics
▋ Energy Technologies: Resources, Energy Materials, Conversion, Conservation, Renewable Energy Conversion Systems-Solar,Wind, Bio-Fuels,etc., Waste-to-Energy, Waste Management, Carbon Management, Green Buildings, Energy Efficiency, Energy Management, Green and Renewable Energy,Energy Audit, Energy Storage, Sustainability, Circular Economy, Sustainable Development, Life Cycle Assessment (LCA) for energy technology, Hydrogen Energy, Fuel Cells, Electric Vehicles, Battery Thermal Management, Hydrogen Production, Storage and Applications,Dynamics and control of thermal systems and processes, I.C,Engines, Automotive Technology, Turbomachines, etc., Advanced Propulsion Systems,Combustion and Gasification
▋Environment: Climate Change, Environmental Impact of Energy Systems and Recycling, Carbon Capture, and Sequestration, Net Zero Carbon
▋ NextGen AI/ML in Thermal and Fluid Engineering
Materials, Manufacturing, and Industrial Engineering,
▋ Advanced,Energy and Composite materials
▋ Smart, functional, and adaptive materials
▋ High-performance composites and lightweight systems
▋ Nano-materials and advanced coatings
▋ Tribological materials and applications
▋ Shielding materials
▋ Biomaterials and bio-inspired design
▋ Materials for extreme environments
▋ Recyclable, biodegradable, and eco-friendly materials
▋ Material characterization and performance evaluation
▋ Additive and hybrid manufacturing technologies
▋ Advanced machining and material removal processes
▋ Machining of hard, brittle, and difficult-to-cut materials
▋ Non-conventional and high-precision manufacturing techniques
▋ Micro and nano manufacturing systems
▋ Metrology, inspection, and quality control in manufacturing
▋ Tooling, tool wear, and surface integrity analysis
▋ Production system integration and industrial case studies
Machine Design, Robotics, Digitization , Tribology
▋Product & Systems Design (Core UX/UI)
▋Scaling Design Systems
▋Design Metrics & ROI
▋CAD/CAE/CAM
▋Multibody dynamics
▋Vibration, acoustics and noise control
▋Design Optimization and Digitization: Integrating digital twins, data-driven parameters, and machine learning models to streamline product development cycles
▋FEA for stress distributions, thermal strains, and failure criteria,static or fluctuating operational loads
▋Advanced parametric modeling
▋Tribology and Power Transmission: Managing friction, lubrication, wear, and efficiency in bearings, clutches, and drives.
▋ Core sensing (LiDAR, radar, sensor fusion), actuation, motion control, and soft robotics
▋ Humanoid robotic systems
▋ Outdoor design, navigation, obstacle avoidance, and multi-robot coordination for unstructured environments.
▋ Sensors and Sensing:Sensor Fusion,Touch / Haptics,Data Acquisition,Advanced Materials,Vision / Imaging Systems,Communications / Networking,LiDAR, Radar, Sonar, and GPS,Human-Machine Interfaces / HRI
▋ Actuation and Mobility:Mobile Platforms,Arms / Manipulators,Batteries / Power Systems,Actuators / Motors / Servos,Soft Robotics Technologies,End Effectors (Grippers and Tools),Wheeled, Tracked and Legged Systems,Research Robots & Development Platforms
▋ Mechatronic system design
▋Control systems and instrumentation
▋Embedded systems and IoT
NextGen AI/ML Applications
▋ Intelligent Condition Monitoring and Predictive Maintenance
▋ Deep Learning for Structural Integrity and Failure Analysis
▋ Case study on Machine Learning for Mechanical Engineers
▋ AI-Application in Smart Manufacturing, IIoT, Electric Vehicles, Battery Thermal Management Systems, and Sustainable Energy Systems
▋ AI-Based Optimization in IC Engines and Power Systems
▋ AI/ML in Thermal Systems
▋ Data-Driven Modeling of Manufacturing Processes
▋ AI-Driven Supply Chain and Logistics Optimization in Manufacturing etc.
Renowned experts and global pioneers delivering visionary lectures at iNGME-2027.
Leadership & Organizing Team for iNGME-2027
Professor Indranil Manna
Vice Chancellor
BIT Mesra
Dr. A. K. Roy
Head of the Department
Department of Mechanical Engineering
BIT Mesra, Ranchi
Dr. Sushil Kumar Dhiman
Assistant Professor
Department of Mechanical Engineering
BIT Mesra, Ranchi
Dr. Anil Chandra Mahato
Assistant Professor
Department of Mechanical Engineering
BIT Mesra, Ranchi
Dr. Mukesh Sharma
Assistant Professor
Department of Mechanical Engineering
BIT Mesra, Ranchi
Dr. Arun Kumar Kadian
Assistant Professor
Department of Mechanical Engineering
BIT Mesra, Ranchi
Dr. Arkadeb Mukhopadhyay
Assistant Professor
Department of Mechanical Engineering
BIT Mesra, Ranchi
Dr. Sushanta Ghuku
Assistant Professor
Department of Mechanical Engineering
BIT Mesra, Ranchi
Dr. Kim Jung-hyun (Professor) Daegu Catholic University, South Korea
Prof. Dr. Dražan Kozak (Professor), University of Slavonski Brod, Croatia
Dr. Vinod Kumar Sharma, Sr. Scientist at ENEA, Matera, Basilicata, Italy
Dr. Mahdi Boukerdja (Associate Professor) University of Lille, France
Mr. Abdul Wahab (Process Engineer) SINOPEC International, Saudi Arabia
Dr. Sanjoy K. Ghoshal (Professor), IIT(ISM) Dhanbad
Dr. K. P. Ajit (Associate Professor), IIT(ISM) Dhanbad
Dr. Amit Rai Dixit (Professor), IIT(ISM) Dhanbad
Dr Pankaj Biswas (Professor), IIT Guwahati
Dr. Ujjwal K Saha (Professor) IIT Guwahati
Dr. Ravi Kant (Associate Professor) IIT Ropar
Dr. Malay Banerjee, (Professor) IIT Kanpur
Dr. Krishan Mohan Kumar(Assistant Professor) IIT Indore
Mr. Jaspal Singh Kushwaha, (GM) REC PDCL, Govt. of India.
Dr. Ashish Rajak(Assistant Professor) IIT Indore
Dr. Jotindra Narayan (Assistant Professor) IIT Patna
Dr. Prashant Rawat (Associate Professor), IIT Madras
Dr. Shri Krishna Tripathi, Scientist Grade F, IGCAR, Kalpakkam
Dr. Prashant V. Baredar,(Professor), MANIT Bhopal
Dr. Vivek Kumar Gaba,(Professor), NIT Raipur
Dr. Anoop Kumar Sood,(Professor), NIAMT Ranchi
Dr. Ratnakar Das,(Professor), NIAMT Ranchi
Dr. Sunil Gupta,(Associate Professor), MNNIT Allahbad
Dr. Om Prakash (Asst. Professor) BIT Sindri
Dr. Dr. Gautam Sarkhel(Professor) BIT Mesra
Dr. Joyjeet Ghose (Associate Professor) BIT Mesra, Ranchi
Dr. Bappa Acherjee (Associate Professor) BIT Mesra, Ranchi
Dr. Sanat Kumar Mukherjee (Assistant Professor) BIT Mesra, Ranchi
Will be updated soon......All accepted and presented papers will be considered for publication.
Selected high-quality papers will be published in a reputated SCI/SCIE//Scopus Indexed Journal
(Journal Name---will be declared soon---).
All presented articles will be published in the official Peer-Reviewed Conference Proceedings with ISBN index.
Gratefully supported by our institutional and government sponsors.
Government / Institutional Body Sponsor
Industrial & Research Partner
Please review the category-wise registration details below before proceeding with payment.
| Category | Offline | Online |
|---|---|---|
| Student[UG/PG/PhD)/Academic Faculty (India) | ₹5000+₹900(18%GST) = ₹5900 | ₹5000+₹900(18%GST) = ₹5900 |
| Industry Person (India) | ₹7000+₹1260(18%GST)=₹8260 | ₹7000+₹1260(18%GST)=₹8260 |
| Student/Academicians/Faculties/Industry (International) | USD 50+All taxes | USD 50+All taxes |
| Accompanying Person(s) | -- | ₹1500+₹270(18%GST)(each person) |
For inquiries regarding paper submissions, registration, or sponsorship, please reach out to the organizing team. +91 9430734803
+91 94301 85578
BIT Mesra, Ranchi, Jharkhand, India - 835215
👉 Click here 👉 PAY Registration Fee
After paying Fee click to Register Now
NOTE: Register Only After Final Acceptance Notification. Once Registered, the fee will not be refunded.
Contact & Venue
Organised By:
Department of Mechanical Engineering,
Birla Institute of Technology, Mesra, Ranchi-835215, Jharkhand, India.
Contact Us:
ingme@bitmesra.ac.in
Website:
www.bitmesra.ac.in
Location Map