Departments  >>  Production Engineering  >  Lab Equipments

Foundry and Forge Technology Lab

Lab In-Charge: Dr. Randhir Kumar

Machines and Instruments

  1. Sand shiver machine -1 no.
  2. Permeability tester –1 no.
  3. Mould Hardness tester – 1 no.
  4. Sand reamer- 1no.

List of experiments / job performance:

  1. Study the different types of pattern and its applications.
  2. To make a wooden pattern for a given metallic part.
  3. Study of the Grain finesse number of the given sample.
  4. Study Permeability and effect of clay content on the properties of moulding sand.
  5. Study the sand core using different additives.
  6. Study the sand mould hardness using different additives.
  7. Study and observe the causes of Casting defects and their precautions.
  8. Study of different types of forging processes and equipment.
  9. To make hexagonal head for a given metallic part by forging.
  10. Study and observe the causes of forging defects and their precautions.

 

Welding and Joining Technology Lab

Lab In-Charge: Mr. Vijay Kumar Mandal

Machines and Instruments

  1. Arc Welding Setup – 2 nos.
  2. Oxy-Acetylene Gas Welding Setup – 1 no.
  3. Resistance Spot Welding Setup – 1 no.

List of experiments / job performance:

  1. Study of oxy-acetylene gas welding process and equipments.
  2. Joining two workpieces using butt joint by gas welding.
  3. Study of different arc welding processes and equipments.
  4. Making a butt joint using the given two M.S pieces by arc welding.
  5. Making a lap joint, using the given two M.S pieces and by arc welding.
  6. Making a corner joint, using the given two M.S pieces and by arc welding.
  7. Study of different resistance welding processes and equipments.
  8. Joining two workpieces using lap joint by resistance spot welding.
  9. Study and observe soldering and brazing processes.
  10. Study and observe the causes of welding defects and their precautions.

Machining and Machine Tool Lab

Lab In-Charge: Mr. Sanjiv Kumar Tiwari

Machines and Instruments

  1. Centre Lathes – 8 nos.
  2. High Speed Engine Lathe – 1 no.
  3. Capstan Lathe – 1 no. 
  4. Horizontal Milling Machine – 2 nos.
  5. Surface Grinding Machine – 2 nos.
  6. Tool and Cutter Grinding Machine – 1 no.
  7. Drilling Machine –  4 nos.
  8. Bench Grinding Machine – 3 nos.
  9. Power Hacksaw – 1 no.

List of experiments / job performance:

  1. Study and practice of orthogonal and oblique cutting on lathe.
  2. Preparation of right hand single point turning tool.
  3. Taper turning operation using lathe.
  4. Right hand threading operation using lathe.
  5. Knurling operation using lathe.
  6. Facing, turning, step turning and chamfering operation using lathe.
  7. Drilling, reaming, tapping operations using drilling machine.
  8. Slab milling and end milling operation.
  9. Grinding to the required accuracy by surface grinding.
  10. Gear cutting on milling machine (spur gear) using indexed milling.

Machine Tool Design Lab

Lab In-Charge: Mr. Sanjiv Kr Tiwari

Machines and Instruments

  1. Sessional work (Partial use of the facilities of Machining and Machine Tool Lab)

List of experiments / job performance:

  1. Classification of machine tools and machine tool structures.
  2. Study of different mechanisms of mechanical transmission used in machine tools.
  3. Study of kinematic structures of different machine tools.
  4. Speed layout of machine tools and analysis of productivity loss.
  5. Analysis of speed structure and design of gear box (Part I: selection of suitable structural form and optimum ray diagram).
  6. Analysis of speed structure and design of gear box (Part II: calculation of shafts size, number of gear teeth, gear module, and width of gear teeth).
  7. Study of different gearing arrangements for feed regulation in machine tools.
  8. Design of lathe bed.
  9. Design of sideways.
  10. Design of control elements.

 

Carpentry and Sheet Metal Working

Lab In-Charge: Dr. Abhishek Kumar Singh

Machines and Instruments

  1. Wood Turning Lathe (01 Nos)
  2. Circular Saw (01 Nos)
  3. Radial Saw (01 Nos)
  4. Bend Saw (01 Nos)
  5. Thickness Planner (01 Nos)
  6. Saws and Files
  7. Bench Vise
  8. Surface Plate
  9. Drilling and Tapping Tools
  10. Combination Sets
  11. C clamp

List of experiments / job performance:

  1. Introduction to Carpentry Shop.
  2. Making of rectangular cross section wooden block of given dimensions.
  3. Making of T Joint wooden structure.
  4. Making of lap joint of wooden structure.
  5. Making of circular wooden job using wood turning lathe.
  6. Introduction to Fitting Shop.
  7. Square filing of metal plate.
  8. Drilling and taping of metal plate.
  9. Step filing of metal plate.
  10. Square fitting of metal plate.

Metrology Lab

Lab In-Charge: Dr. Abhishek Kumar Singh

Instruments:

  1. Profile Projector
  2. Surface Plate
  3. Vernier calipers
  4. Inside Micrometer
  5. Micrometer
  6. Slip Gauge
  7. Vernier Height Gauge
  8. V Block
  9. Sine Bar
  10. Bevel Protractor.

List of experiments / job performance:

  1. Calibration of micrometer using slip gauge.
  2. Calibration of vernier caliper using slip gauge.
  3. To measure diameter of sphere/ cylinder using Vernier Caliper.
  4. To measure the height of specimen using Vernier Height Gauge.
  5. To measure the diameter of wire using Micrometer.
  6. To measure internal diameter of hole in given specimen.
  7. To study Profile Projector.
  8. To determine the dimension of a threaded bolt or screw using a Profile Projector.
  9. To measure the angle of a given wedge using Sine Bar.
  10. To measure surface roughness using Profile Projector.