Birla Institute of Technology, Mesra
Faculty Image

Dr. Praveen Mishra

Joined Institute on : 24-Jan-2004

  • Assistant Professor
  • Mechanical Engineering
  • BE(Mechanical), M.Tech (CIDM),Ph.D.(Mechanical) ,PGDM (IIM-Ranchi)
Contact Address

BIT Mesra, Ranchi

BIT Mesra, Ranchi

  • Phone Office - 0651-2275924
  • Phone Residence - 9431327060
  • Email - pmishra@bitmesra.ac.in
Work Experience

Teaching : 19 Years

Research : 21 Years
Professional Background
  • Worked as a Research Associate in the Iron-making group, Research and Development Division of Tata Steel, Jamshedpur from10th June 2002 to 22nd January 2004, On the project titled “Physical model studies of the hearth drainage phenomena of Blast Furnace” 
  • Worked as Project Engineer at Sharp Engineers Ltd. A/17, H-Block, MIDC, Pimpri, Pune from 18thJuly 1997 to 17thAugust 2000.
Research Areas
  • Process Modelling
  • Fluid Mechanics
  • Non Conventional Energy
  • Solar Energy Technology
  • Industrial Management
Publications

List of Publications

International/National Journals: 

  1. Om Prakash Pandey, Vivek Victor Dung Dung , Praveen Mishra , Ravi Kumar  “Simulating rooftop solar arrays with varying design parameters to study effect of mutual shading” Energy for Sustainable Development, Elsevier, 68 (2022),pp. 425–440 (SCIE Journal)
  2. Arvind Kumar Tiwari, Chandan Kumar, Praveen Pachauri, Praveen Mishra, “A Review on Energy Sources, in India”, Anvesak- A  bi- annual Journal -UGC Care Group 1 Journal, Vol.51, No.1(VI), January - June 2021, pp.116-127,ISSN: 0378-4568. (UGC Journal)
  3. Manish Kumar, Praveen Mishra and Apurba Kumar Roy, “Analysis of Different Mould Section Sizes to Optimize the Submerged Entry Nozzle to Measure the Meniscus Fluctuation in a Continuous Casting Mould” Crystals, Volume 11,( 2021) 564 (SCIE Journal)
  4. Anupama, Chandan Kumar, Praveen Mishra& Pankaj Kumar, “Failure Analysis of Suspension System Through Bond Graph”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 3, Jun 2020, pp. 11823–11832,ISSN(P): 2249–6890; ISSN(E): 2249–8001. (SCOPUS )
  5. Anupama, Chandan Kumar, Praveen Mishra, Pankaj Kumar & Vikash Chauhan, “Bending Strength Determination of Involute Spur Gear Using Analytical Method and FEM”, International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Vol. 10, Issue 3, Jun 2020, pp. 11823–11832,ISSN(P): 2249–6890; ISSN(E): 2249–8001. (SCOPUS )
  6. Shailesh Kumar Sarangi, D. P. Mishra & P. Mishra, “Parametric Investigation of Wavy Rectangular Winglets for Heat Transfer Enhancement in a Fin-and–Tube Heat Transfer Surface”, Journal of Applied Fluid Mechanics, Vol. 13, No. 2, pp. 615-628, 2020, ISSN: 1735-3572. (SCI Journal)
  7. Manish Kumar, Praveen Mishra and Apurba Kumar Roy, “Influence of Submerged Entry Nozzle Port Blockage on the Meniscus Fluctuation Considering Various Operational Parameters” Metals, Volume 10, Issue 2 (February 2020) 269, (SCIE Journal)
  8. Shailesh Kumar Sarangi, Dipti Prasad Mishra & Praveen Mishra, “Numerical Analysis of Thermo-Fluid Performance of Fin-and-tube Heat Transfer Surface using Rectangular Winglets”, Journal of Heat Transfer ASME, Vol. 141(10), pp. 101801-1 – 101801-13, 2019, ISSN: 0022-1481. (SCI Journal)
  9. Rohit Kumar, Saket Pratap, Praveen Mishra “Design and Utilization of Solar tree for Domestic Use”, Journal of Civil Engineering and Environmental Technology (JCEET), ISSN:2349-8404, Vol.5, Issue 3, January-March 2018, pp.158-163.
  10. Praveen Mishra, Subrata Sarkar, “Experimental Investigation of Slag Splashing      in a Converter”, International Advanced Research Journal in Science, Engineering and Technology (IARJSET), ISSN:23938021, Vol.4, Special Issue 3, February l 2017.
  11. Rohit Y Jambhulkar, Vikas Singh, Praveen Mishra, Raghavendra Krishnamurthy, “Role of Thermal Driven Buoyancy Flow on Solidification Process of Continuous Slab caster”, International Journal of Innovative Research in Science, Engineering and Technology, ISSN:2319-8753, Vol.5, Issue 4, April 2016.(Scopus)
  12. Praveen Mishra, S.K.Ajmani, Arbind Kumar and K.K.Shrivastava, “Experimental Investigation of SEN and Mould for Continuous Slab Caster by Physical Modelling”, International Journal of Engineering Science and Technology (IJEST), ISSN: 0975-5462, Vol.4 No.06 June 2012, pp.2748-2758.
  13. Praveen Mishra, S.K.Ajmani, Arbind Kumar and K.K.Shrivastava, “Review Article on Physical and Numerical Modelling of SEN and Mould for Continuous Slab Casting” International Journal of Engineering Science and Technology (IJEST),ISSN:0975-5462, Vol.4 No.05 May 2012,pp.2234-2243.
  14. B.S.Desai, S.K.Ajmani, S.N.Lenka, P.Mishra and S.Ganguly “Physical model Study of Hearth Drainage Phenomena of Blast furnace” Tata Search- 2004, pp.61-66.

 

Journal Proceedings:

  1. Manish Kumar, Apurba Kumar Roy, and Praveen Mishra ,“A water model study on the impact of blockage of port on meniscus variation by varying numerous parameters”. AIP Conference Proceedings 2358, 120003 (2021); https://doi.org/10.1063/5.0057932, Published Online: 30 July 2021
  2. Manish Kumar, Praveen Mishra, Apurba Kumar Roy “Experimental optimization of submerged entry nozzle submergence depth to reduce meniscus fluctuations: A water model study” Materials today Proceedings, November 2020

 

International and National Seminar/ conference:

  1. Ayush Jain, Raman Kumar, Praveen Mishra, “ Industrial Application of Solar Water Heater in Dairy Farming” International Conference on Cutting Edge Technological Challenges in Mechanical Engineering (CETCME-2020), Department of Mechanical Engineering, Noida Institute of Engineering & technology, Greater Noida.21st – 22nd August 2020
  2. Rishikesh Sharma, S. Ganguly , D.P. Mishra, Praveen Mishra, A.N.S.S.Swain, “Analysis of thermo-fluidic and phase change behaviour of liquid steel in a continuous billet caster mould : Effect of casting speed”,  International Conference on “Recent Advances in Mechanical Engineering Research and Development” (ICRAMERD-20), Department of Mechanical Engineering, Institute of Technical Education and Research, Siksha ‘O’ Anusandhan (Deemed to be University) Bhubaneswar, Odisha, 24-25, July 2020.
  3. Manish Kumar, Praveen Mishra, Apurba Kumar Roy, “Experimental Optimization of Submerged Entry Nozzle Submergence Depth to Reduce Meniscus Fluctuations: A Water Model Study”, International Conference on “Recent Advances in Mechanical Engineering Research and Development” (ICRAMERD-20), Department of Mechanical Engineering, Institute of Technical Education and Research, Siksha ‘O’ Anusandhan (Deemed to be University) Bhubaneswar, Odisha, 24-25, July 2020.
  4. Vivek Kumar ,Sweety Dutta ,Prasad Kopparthi , Praveen Mishra, “Modelling of Column Floatation Using CFD”, International Conference on “Recent Advances in Mechanical Engineering Research and Development” (ICRAMERD-20), Department of Mechanical Engineering, Institute of Technical Education and Research, Siksha ‘O’ Anusandhan (Deemed to be University) Bhubaneswar, Odisha, 24-25, July 2020
  5. Shailesh Kumar Sarangi, Dipti Prasad Mishra and Praveen Mishra, “Heat transfer enhancement in a fin-and-tube heat exchanger by winglets with punched holes”, 25th National and 3rd International ISMHT-ASTFE Heat and Mass Transfer Conference (IHMTC-2019),IIT Roorkee, 28-31, December 2019.
  6. Anubhav Kumar Pandey, Shalin, Praveen Mishra, “A review paper on Significance and Essentialities of Smart Grid”, “National conference on recent Advancement in Mechanical Engineering” organized by Birla Institute of Technology, Mesra Ranchi during 19th February,2019.
  7. Shailesh Kumar Sarangi, Dipti Prasad Mishra and Praveen Mishra, “Parametric Investigation of a Fin-and-tube Heat Transfer Surface Supported with Winglets”. National conference on Recent Advancement in Mechanical Engineering (NCRAME 2019), BIT, Mesra, Ranch during 19th February,2019, ISSN No. 978-93-8830-572-3
  8. Kumar Rohit, Sukalyan Chakraborty, Praveen Mishra, “Application of CuO Nano Particles in Solar Still for Improved Desalination”. “National conference on recent Advancement in Mechanical Engineering” organized by Birla Institute of Technology, Mesra Ranchi during 19th February, 2019.
  9. Sweety Dutta, Praveen Mishra, Prasad Kopparthi, “A CFD Model of Column Flotation Incorporating Population Balance Model”. “National conference on recent Advancement in Mechanical Engineering” organized by Birla Institute of Technology, Mesra Ranchi during 19th February, 2019.
  10. Anmol Chaudhary, Praveen Mishra,Vikrant Yadav, Senthil Kumar, Yogendra Singh,“Performance Evaluation of Evacuated Tube based Solar air heating system at different solar intensity” “National conference on recent Advancement in Mechanical Engineering” organized by Birla Institute of Technology, Mesra Ranchi during 19th February, 2019.
  11. Asim Bisayee, Mahesh C. Sharma and Praveen Mishra, “Characterization of Hotspots on Photovoltaic modules and its analysis with MATALB”, “National conference on recent Advancement in Mechanical Engineering” organized by Birla Institute of Technology, Mesra Ranchi during 19th February, 2019.
  12. Asim Bisayee, Mahesh C. Sharma, Praveen Mishra and Chandan Banerjee, “Characterization of CdTe and CIGS Thin Film Photovoltaic Modules by Infrared thermography (IR) and electroluminescence (EL) imaging techniques”, International Conference on materials for Energy Applications for renewable Energy” organized by S.S. Subodh, Jaipur during 8th Dec., 2018.
  13. Praveen Mishra, Chandan Kumar, Anupama, “Finite Element Analysis and comparative study of boiler joint prepared by TIG and MIG Welding”, National conference on Advances in welding Technology, (NCAWT-2018), 18-19 September,2018, Department of Mechanical Engineering, Noida Institute of Engineering and Technologies (NIET), Greater Noida.
  14. G Sasi Sekhar and Praveen Mishra, “Design and Selection Criteria for Experimental Study of Fluid Flow Behavior in a Continuous Casting Mold”, International Conference on ‘Advancements and Recent Innovations in Mechanical, Production and Industrial Engineering” (ARIMPIE-2017)’, 21-22 April 2017 Noida, Uttar Pradesh, India.
  15. Praveen Mishra, Subrata Sarkar, “Experimental Investigation of Slag Splashing      in a Converter”. International Conference on Cutting Edge Technological Challenges in Mechanical Engineering, (CETCME-2017), February 18-19, 2017, Department of Mechanical Engineering, Noida Institute of Engineering & Technology (NIET),Greater Noida, India.
  16. Rohit Y Jambhulkar, V Singh, P Mishra, R Krishnamurthy, “Numerical study of thermal driven buoyancy flow effect on solidification process of continuous slab caster”. International Conference on Advances in Materials and Manufacturing Applications (IConAMMA-2016), 14-16 July 2016, Bangalore.
  17. Singh Rahul Manoj, Vikas Singh, Praveen Mishra, “Characterization of Various Tundish Design by Normalization of Plug Volume and Dead Volume”. International Conference on Emerging Trends in Engineering and Technology, 1 May 2016, Mumbai. (ISBN:9788192958060)
  18. Wazeda Begum, Praveen Mishra and Tapan K Rout, “Characterization of Magnetic Magnetite Nano-particles for Heat Transfer”. International Seminar on Mineral Processing Technology (MPT-2013), 10-12 December 2013, CSIR-IMMT, (Institute of Minerals and Materials Technology) Bhubaneswar.
  19. Ravi Golani, Raahul Krishna, Vikas Singh, Praveen Mishra, S.K. Ajmani, Anurag Tripathi, Anup Trivedi, “Influence of Casting Parameters on Fluid Flow Phenomena in Slab Casting Mould using Physical Modelling”. National Conference on Iron and Steel Technologies-Research and Application (ISTRA-2012), 14-15 December 2012. Department of Metallurgical Engineering, IIT BHU, Varanasi.
  20. Praveen Mishra, K.K.Shrivastava, Mrityunjay K.Singh, “Scale Model Experiment and CFD verification of SEN and Mould for Continuous Slab Caster”, International Conference on Computational Methods in Manufacturing(ICCMM 2011),December 15-16, 2011 ,Department of Mechanical Engineering, Indian Institute of Technology Guwahati, India. 
  21. Praveen Mishra and K.K.Shrivastava, “Experimental Analysis of Meniscus Fluctuation in a Continuous Casting Mould”. National Seminar on Development in Materials and Manufacturing Process (DMMP-2011), March 5, 2011. Department of Mechanical Engineering, Raajdhani Engineering College, Bhubaneswar.
  22. Ankit Drolia, R.P.Sharma, Praveen Mishra, O.P.Pandey and Arbind Kumar, “Micro- Hydal Turbine (Cross-Flow)”, National Conference on New and Renewable Energy: Prospects an Challenges, BIT Mesra, Ranchi, 17-18 December, 2007.
  23. Praveen Mishra, O.P.Pandey, Anand Kumar and Vivek Kr. Gaba, “Experimental Investigation of Bio-Gas Plant for running Duel fuel Engine”, National Seminar on Integration of Energy From Conventional and Non-Conventional Sources, Laxmi Narain College of Technology, Bhopal, 7-9 October, 2006.
  24. Praveen Mishra and S. Karmakar, “Non-Linear Simulation of Flexibly Supported Finite Turbulent Flow oil Journal Bearings”, National Conference on Recent Advances in Industrial Tribology and Maintenance, Department of Mechanical Engineering, NIT, Rourkela, 21-22 January, 2006.
  25. Praveen Mishra, Anand Kumar, Vivek Gaba, “Hearth Conditions of a Furnace with Reference to Hot Metal Flow”, 32ndNational Conference on Fluid Mechanics and Fluid Power (FMFP), Department of Mechanical Engineering, TPCT College of Engineering, Osmanabad, Maharashtra ,15-17, December 2005.
  26. Vivek Kr Gaba and Praveen Mishra, “Recent Trends in Biogas Plant Design for The Performance of Duel Fuel Engine”, National conference on Recent Trends in Renewable Energy Technology, National Engineering College, Thoothukudi, Tamil Nadu.   9-10th December 2005
  27. Praveen Mishra and Sabin Mishra, “Physical model study of Hearth Drainage Phenomena of Blast Furnace By using NDE Techniques” National seminar on Role of NDE in Modern Maintenance Management, IACR Engineering College, Rayagada, Orissa. 12-13 March, 2005.

 

 
Text and Reference Books

Physical modelling of fluid flow in Submerged Entry Nozzle and Mould-An experimental approach to study the performance parameters, Lambert Academic Publishing, 978-3-659-78652-5. 2015