Dr. Sujeet Kumar Mishra graduated in Mechanical Engineering did his Masters in Engineering in Computer Aided Analysis & Design and Ph.D. in Mechanical Engineering from Birla Institute of Technology, Mesra, Ranchi, India. His research area includes Plastic deformation and Fracture of metals, Electromagnetic radiation from metals & alloys and Smart materials.

• Design Engineering
• Plastic Deformation and Fracture of Metals
• Materials Technology

Ph. D. Thesis Supervised: 02 Awarded, Undergoing 00 

• Vishal Kumar - Study of Electromagnetic Radiation from piezoelectric composites for Wireless sensing and energy harvesting applications (Awarded on May 22, 2026)
• Ranjan Kumar - Development of Multiphase Hybrid Filler-Based Thermoplastic Composites for Tribological Applications (Awarded on April 04, 2026)                        

M.E. Thesis Supervised: 06

• Thermo mechanical modelling of casting strand - Megha Mallick (2019)
• Design and development of a 2-degree-of-freedom Haptic device - Anshumaan Pratap Bhagat (2018)
• Analysis of thin shell by setting up the differential equation for general shape by using vector method - Dinesh Singh (2013)
• Analysis of Stresses and Deformations in Spur gears by Finite Element Method – Sachindra Kumar (2011)
• Analysis of Plate Heat Exchanger Gasket – Amit Kumar (2011)
• Durability analysis of body structure of Cowl – Kulkarni P Uddhav Rao (2011)

B.E./B.Tech. Project Guided: 30+

• Comparative FEA of Hexagonal Honeycomb and Re-Entrant Auxetic Core Structures (2026)
• Design, Optimization and numerical investigation of geometrically enhanced and Nano-Enhanced PCM systems for solar electronic thermal management (2026)
• Effect of filler contents on tribological behavior of PA-6,6/GF15/GNPs/SIO₂ hybrid polymer composites (2025)
• Application of machine learning algorithms for predicting the tribological performance of PA-66/GF15/GnPs hybrid composites using dry sliding conditions (2025)
• Computational modelling and analysis of Clutch Plate (2024)
• Designing of IoT framework for machine digitization (2023)
• Designing a torsionally stiff race car chassis (2023)
• Design and analysis of a piston using aluminium silicon carbide with different percentage compositions of ZrO₂ (2022)
• Design and analysis of a chain sprocket wheel using different materials (2022)
• Modal analysis of a composite cantilever beam (2022)
• Design and material analysis of disc brake rotor (2021)
• Crash analysis of the Roll-Cage of an All-Terrain vehicle (2021)
• Design and fabrication of power-generating speed breakers (2020)
• Design and fabrication of an impact attenuator for a formula-type race car (2020)
• Designing and manufacturing of a custom-made steering assembly for an all-terrain vehicle (2019)
• Design and fabrication of anti-vibration rubber mounts for an All-Terrain vehicle for BAJA SAE (2019)
• Alternative materials for automatic transmission in heavy-duty vehicles (2018)
• Some studies on the SEM micrograph of sintered and rolled metals (2017)
• Comparative study of the mechanical properties of sintered preforms of hexagonal closed pack structure and face centered cubic metals (2016)         

• Worked as Examiner in State/s Public Service Commission
• Chaired the Session in the 3^rd International Conference on Thermo-Fluids and System Design (ICTFSD - 2026) at BIT Mesra, Ranchi, on 06 – 07 August 2026
• Chaired the Session in the International Conference on Thermo-Fluids and System Design (ICTFSD - 2022) at BIT Mesra, Ranchi, on 22-23 March 2022
• Working as a Board of Governors of Pailan College of Management & Technology, Kolkata 700104

Reviewed the following titles

1) CAD/CAM Theory & Practice - By Dr. Ibrahim Zeid & Dr. R Sivasubramanian of Tata McGraw Hill Publication, New Delhi

2) Mechatronics – Principles, Concepts and Applications – By Dr. Nitaigour Premchand Mahalik of Tata McGraw Hill Publication, New Delhi

International Journals

• Vishal Kumar, Sujeet Kumar Mishra, Amit Kumar “Drop-weight impact-driven energy harvesting characteristics of lead-free Cement/BNT-BKT-BT composites using electromagnetic radiation method” Journal of Materials Engineering and Performance (2026) DOI: 10.1007/s11665-026-14158-6 IF 2.00 (Springer)
• Ranjan Kumar, Kamlendra Vikram, K. Bimla Mardi, Sudhir Kumar Saw, Sujeet Kumar Mishra*, Sudeepan Jayapalan “Study of GnPs embedded PA-6,6 Composites: Insights into their Thermal Kinetic study and Tribological behavior Under Dry Sliding” ChemistrySelect 11, Issue 13 (2026) pp 1-15 https://doi.org/10.1002/slct.202507442 IF 2.0 (Wiley)
• Ranjan Kumar, Sujeet Kumar Mishra, Sudeepan J "Tailoring the performance of Nano silica reinforced PA-6,6 nanocomposite: Insight into their structural, thermo-mechanical, tribological and scratch resistance behaviour" Polymer Composites (2025) 47, Issue 6 pp 5707-5725  https://doi.org/10.1002/pc.70521 IF 4.7 (Wiley)
• Vishal Kumar, Sujeet Kumar Mishra, Amit Kumar “Temperature induced electromagnetic radiation energy harvesting characteristics of cement/PZT composites” Processing and Applications of Ceramics 19 Issue 3 (2025) pp 215-223 https://doi.org/10.2298/pac2503215k IF 0.7
• Ranjan Kumar, Kamlendra Vikram, Sudeepan J, Sujeet Kumar Mishra* “Evolution of metallic dental implants: historical perspective, needs, and application (2025) Vol 22 pp 89-106 Ch 1.4, Advanced Biomedical Composites Materials, Design, Manufacturing, https://doi.org/10.151555/9783111386027-004 ISBN: 9783111386027 (DeGruyter)
• Ranjan Kumar, Sujeet Kumar Mishra, Sudeepan Jayapalan “Effect of Molybdenum disulfide (MoS2) reinforcement on the Structural, Thermal, Mechanical, and Tribological analysis of Novel Polyamide 6,6 (PA 6,6) Composites" Journal of Applied Polymer Science 142 Issue 26 (2025) pp 1-22 https://doi.org/10.1002/app.57081 IF 3.0 (Wiley)
• Ranjan Kumar, Sujeet Kumar Mishra*, Sudeepan Jayapalan “Experimental Analysis on the Microstructural, Mechanical, Thermal and Tribological Properties of Graphene Nanoplatelets and Molybdenum Disulfide Filled Polyamide-6,6 Novel Hybrid Composite” Polymer Composites 46 Issue 5 (2025) pp 4703-4728,  https://doi.org/10.1002/pc.29270 IF 4.8 (Wiley)
• Vishal Kumar, Amit Kumar, Sujeet Kumar Mishra, Kamal Prasad "Temperature-dependent electromagnetic radiation energy harvesting from soft-grade lead zirconate titanate ceramics" Journal of Materials Science: Materials in Electronics 36 Issue 126 (2025) https://doi.org/10.1007/s10854-024-14181-0 IF 2.97 (Springer)
• Ranjan Kumar, Saurabh Suman, Umang Raj, Sujeet Kumar Mishra, Sudhir Kumar Saw, Sudeepan Jayapalan “Friction and Wear Characteristics of Anti-skid Masterbatch Filled Acrylonitrile Butadiene Styrene (ABS) based Polymer Composite Using Taguchi and Machine Learning Techniques” Iranian Polymer Journal 34 Issue 7 (2024) pp 1039-1055, https://doi.org/10.1007/s13726-024-01434-2 S ISBN 1735-5265 IF 2.4 (Springer)
• Ranjan Kumar, Sujeet Kumar Mishra, Umang Raj, Swaraj Sengupta, Rajeshwari Chatterjee, Shatrudhan Pandey, S.M. Mozammil Hasnain, Adham E. Ragab, Ahmed Farouk Deifalla and Sudeepan Jayapalan “Influence of graphene nanoplatelets (GnPs) and titanium dioxide (TiO2) hybrid fillers on the mechanical, thermal, and morphological performance of polypropylene (PP) based hybrid composites” Polymers and Polymer Composites 32 (2024) pp 1-17, https://doi.org/10.1177/09673911241260160 ISBN: 1478-2391 IF 3.0 (SAGE)
• Vishal Kumar, Amit Kumar, Sujeet Kumar Mishra, Kamal Prasad “Effect of dimension size on electromagnetic radiation energy characteristics of Lead Zirconate Titanate under drop weight impact load” Ferroelectrics Vol 618, Issue 2 (2024) pp. 501- 511 https://doi.org/: 10.1080/00150193.2023.2273726 IF 0.7 (Taylor & Francis)
• Ranjan Kumar, Sujeet Kumar Mishra, S M Mozammil Hasnain, Shatrudhan Pandey, Ahmed Farouk Deifalla, Sudeepan Jayapalan “Study of Thermal and Mechanical Behavior by Analyzing Reinforcement Effect of Graphene Nanoplatelets on Polyamide-66 Composite System Developed via Melt-Mixing Technique” Materials Research Express 10 Issue 3 (2023) 105306, https://doi.org/10.1088/2053-1591/ad0361 IF 1.8 (IOP)
• Ranjan Kumar, Sujeet Kumar Mishra, Kaushik Kumar “A Critical Review on Finite Element Models Towards Physico-Mechanical Properties of Bamboo Fibre/Filler-Reinforced Composite Materials” Bamboo and Sustainable Construction (2023) pp 241-261 Environmental Footprints and Eco-design of Products and Processes ISBN 978-981-99-0231-6, https://doi.org/10.1007/978-981-99-0232-3 (Springer)
• Sujeet Kumar Mishra*, Vinay Sharma, Ashok Misra “Some Investigations on the Intermittent Radiation during Plastic Deformation of Sintered Powder zinc specimens under compression” Materials Today: Proceedings Vol 61 Part 1(2022) pp 62-72 https://doi.org/10.1016/j.matpr.2022.03.313 (Elsevier)
• Sujeet Kumar Mishra, Divyang Gupta, Mudit Nagar, Ayush Kumar “Crash analysis of Roll-Cage of an All-Terrain Vehicle” International Research Journal of Engineering and Technology Vol 8 Issue 5 (2021) pp 3053- 3059. ISSN: 2395-0072
• Shivam Mahajan, Neeraj Dokania, Akshay Kumar, Sujeet Kumar Mishra “Design and fabrication of an impact attenuator for formula type race car” in Advanced Manufacturing Systems and Innovative Product Design, Lecture Notes in Mechanical Engineering, https://doi.org/10.1007/978-981-15-9853-1_12, (2021) pp 131-145 (Springer)
• Aditya Sinha, Abhishek Jakhmola, Shashank Mittal, Sujeet Kumar Mishra “Green energy generation from road traffic using speed breakers” Materials Today: Proceedings 38 Part 1 (2021) pp 160-168 doi.org/10.1016/j.matpr.2020.06.248  (Elsevier)
• Sujeet Kumar Mishra*, B S V Sreekanta “Designing of anti-vibration rubber mounts for an all-terrain vehicle for BAJA SAE” International Journal of Energy Technology 2(1) (2020) 39-54. https://doi.org/10.32438/IJET.203012
• Aditya Sinha, Shashank Mittal, Abhishek Jakhmola, Sujeet Kumar Mishra “Design of power-generating speed breakers” International Journal of Advanced Science and Technology Vol. 29 (2020) No. 7, pp. 11790-11799 (Elsevier)
• Sujeet Kumar Mishra*, Ashok Misra “Effect of shape geometry on electromagnetic radiation under quasi-static compression in sintered aluminium Preforms” International Journal of Energy Technology 2(1) (2020), 12-25. https://doi.org/10.32438/IJET.203008
• Sujeet Kumar Mishra*, Vinay Sharma, Ashok Misra “Effect of rate of deformation on electromagnetic radiation during quasi-static compression of sintered aluminium preforms” International Journal of Materials Research (Formerly Zeitschrift für Metallkunde) 105 No. 3 (2014), pp 265-271. https://doi.org/10.3139/146.111014 (Hanser) IF 0.7
• Sujeet Kumar Mishra, Ashok Misra, “Prediction of Intermittent Electromagnetic Radiation during strain-hardening of Sintered Powder Face-centered-cubic Metals under compression” (Under review)
• Sujeet Kumar Mishra, Ashok Misra “Comparative study on the intermittent electromagnetic radiation during plastic deformation in cylindrical annular sintered powder metal specimens under compression” (Under review)
• Sujeet Kumar Mishra, Ashok Misra “Effect of antenna position on the intermittent electromagnetic radiation during progressive compressive plastic deformation of some hollow sintered powder metals” (Under review)

International Conference

• Sujeet Kumar Mishra, Ashok Misra “Prediction of intermittent Electromagnetic Radiation during strain hardening of sintered powder Face-centered-cubic metals under compression” International Conference on Recent Advances in Materials and Emerging Applications (RAMEA 2026) at NERIST, Nirjuli on 06-07 April 2026
• Sujeet Kumar Mishra, Ashok Misra, Rajeev Kumar “Comparative study on the intermittent electromagnetic radiation during plastic deformation in cylindrical annular sintered powder metal specimens under compression” International Conference on Recent Advances in Materials and Emerging Applications (RAMEA 2026) at NERIST, Nirjuli on 06-07 April 2026
• Ranjan Kumar, Sujeet Kumar Mishra, Sudeepan Jayapalan, “Assessment of graphene nanoplatelets on polyamide-6,6 matrix: Study of thermal kinetic and their tribological behavior under dry sliding conditions for the linear reciprocating test” 30th International Conference on Processing of Advanced Materials and Fabrication of Products (2024) organised by IIT, Hyderabad, 11-13 December 2024
• Sujeet Kumar Mishra, Vinay Sharma, Ashok Misra “Some Investigations on the Intermittent Radiation during Plastic Deformation of Sintered Powder zinc specimens under compression” International Conference on Thermo-Fluids and System Design at Ranchi on 22-23 March 2022 (ICTFSD -2022)
• Shivam Mahajan, Neeraj Dokania, Akshay Kumar, Sujeet Kumar Mishra “Design and fabrication of an impact attenuator for formula type race car” National Conference on Innovative Product Design and Intelligent Manufacturing systems (IPDIMS 2020) at Rourkela on 02-03 December 2020
• Aditya Sinha, Shasank Mittal, Abhishek Jakhmola, Sujeet Kumar Mishra “Green energy generation from road traffic using speed breakers” 2nd International Conference on Future Learning Aspects of Mechanical Engineering at Noida on 5-7 August 2020 (FLAME -2020)
• Aditya Sinha, Shasank Mittal, Abhishek Jakhmola, Sujeet Kumar Mishra “Design of power generating speed breakers” International Conference on Advances in Science and Management at Nagpur on 27-28 March 2020 (ICAESM -2020)
• Sreekanta B S V, Sai Krishna M G V, Sujeet Kumar Mishra “Design and Fabrication of Anti Vibration Rubber Mounts for an All-Terrain Vehicle for BAJA SAE” International Conference on Mechanical Engineering Design at Chennai on 25-26 April 2019

National Journal/Conference

• Shivam Mahajan, Neeraj Dokania, Akshay Kumar, Sujeet Kumar Mishra “Design and fabrication of an impact attenuator for formula type race car” National Conference on 2nd Innovative Product Design and Intelligent Manufacturing systems (IPDIMS) at Rourkela on 12-13 February 2021 
• Manas Mehrotra, Siddhant Patel, Ashutosh Sharma, Sujeet Kumar Mishra “Designing of a custom-made steering assembly for an All-Terrain Vehicle” National Conference on Recent Advancement in Mechanical Engineering under TEQIP III at Ranchi on February 18-19, 2019, e-ISBN: 978-93-8830-572-3
• Sujeet Kumar Mishra, Vinay Sharma, Ashok Misra “Some Studies on the Electromagnetic radiation under compression in sintered Aluminium Preforms” 27^th National Convention of Production Engineers and National Seminar on Advancements in Manufacturing – Vision 2020 under the aegis of Production Engineering Division, IEI organized by The Institution of Engineers (India), Jharkhand State Centre & Department of Production Engineering, BIT Mesra, Ranchi, May 25-26, 2012
• Sujeet Kumar Mishra, Ashok Misra “Electromagnetic radiation during plastic deformation under unrestricted quasi-static compression in sintered metal” National workshop on Precision Forming (Tools & Techniques at BIT Mesra, Ranchi, February 21-22, 2011 under SAP, UGC, New Delhi

CONFERENCES/WORKSHOPS/SHORT TERM COURSES

• Completed the Faculty Development Program on “Machine Learning for Materials and Metallurgical Engineering” under Malaviya Mission Teacher Training Centre of UGC, organized by Centre for Faculty Development & Educational Technology, IIT (BHU) Varanasi from July 13 - 18, 2026
• Participated in “Intellectual Property Awareness/Training program” under National Intellectual Property Awareness Mission, organized by Intellectual Property Office India on July 10^th, 2026
• Completed the Refresher Course on “Advanced Optical Communication for 6G and Beyond” organized by Malaviya Mission Teacher Training Centre, IIT(ISM) Dhanbad from June 15 - 26, 2026
• Completed the Short Term/Faculty Development Program on “Qualitative Research Approaches: In-Depth Analysis of Human Behaviour and Social Phenomena” under Malaviya Mission Teacher Training Centre of UGC, organized by IIT Kharagpur from 01^st – 06^th June 2026
• Completed the Capacity Building Program on “Artificial Intelligence” under Malaviya Mission Teacher Training Centre of UGC, organized by IIT Ropar from 25^th – 30^th May 2026
• Completed the FDP on “Future-Ready Training Practices organized by IIT Mandi @ 6 - 8 PM from 6^th – 8^th May 2026
• Completed the Short Term/Faculty Development Program on “AI Driven MOOC Content Creation, E-Content Development, Research Methodology” under Malaviya Mission Teacher Training Centre of UGC, organized by IIT Patna from 04^th – 09^th May 2026
• Completed the Short Term/Faculty Development Program on “Integrating AI and Machine Learning in Science, Humanities and Social Science Education: Foundation Perspectives” under Malaviya Mission Teacher Training Centre of UGC, organized by IIT Patna from 20^th – 25^th April 2026
• Completed 12-Day Refresher Course on “Processing–Structure–Property Relationships in Advanced Engineering Materials” under Malaviya Mission Teacher Training Centre of UGC, organized by IIT Mandi from 16^th – 28^th March 2026
• Completed the Five-Day SPARC Workshop entitled “Vibration of Metamaterials and Smart Materials” organised by the Department of Mechanical Engineering, NIT Silchar at 5 – 8 PM  from 18^th – 22^nd February 2026
• Completed the 6-Day Short Term Programme on “Advancements in Additive Manufacturing: Processes, Materials and Applications” under Malaviya Mission Teacher Training Centre of UGC, organized by IIT Mandi from February 16 - 21, 2026
• Completed a Short Term Programme in “AI Tools in Teaching and Learning” under Malaviya Mission Teacher Training Centre of UGC, organized by Pt. Ravishankar Shukla University, Raipur from February 09 - 14, 2026
• Completed the Refresher Course on “Advanced Research Methodology” under Malaviya Mission Teacher Training Centre of UGC, organized by Centre for Faculty Development & Educational Technology, IIT (BHU) Varanasi from January 19 - 31, 2026
• Attended the 5 Days Workshop on “Recent Trends to Waste-To-Energy Technologies for a low Carbon future” organized by Department of Mechan Engineering NIT Mizoram from 13^th - 17^th October 2025
• Participated in the 5 Days Workshop on “Advanced Materials and Manufacturing: Characterization and Applications” DST-ANRF sponsored, organized by Department of Mechanical Engineering, NIT Karnatka, Surathkal from 22^nd - 26^th September 2025
• Participated in the 5 Days Workshop on “Frontiers in flow boiling: Exploring multiscale transport, industrial applications, and future pathways” funded by DST-ANRF organized by Department of Mechanical Engineering, NIT Karnatka, Surathkal from 18^th - 22^nd August 2025
• Completed the Refresher Course on “Recent Advances in Smart Materials for Energy, Environment and Biomedical Applications” organized by Malaviya Mission Teacher Training Centre, IIT(ISM) Dhanbad from 01^st - 12^th August 2025
• Completed the 12-days Refresher Course on “Subtractive, Additive and Digital Manufacturing” organized by the Malaviya Mission Teacher Training Center at the IIITDM, Kancheepuram, Chennai from July 7 - 19, 2025
• Participated in the 5 Days National Workshop on “Materials Characterization and Sustainable Additive Manufacturing (MCSAM-2025)” organized by Department of Mechanical Engineering NIT Rourkela from 3^rd - 7^th June 2025
• Participated in one Day faculty Development Workshop on KYaaT (Know Yourself as a Teacher) organized by Value Education Cell & Institution’s Innovation Council Cell, BIT. Mesra Ranchi on April 23, 2025
• Attended the 5 Days Workshop on “Rural Technology with Special Emphasis on North East India” organized by NIT Mizoram from 17^th - 21^st March 2025
• Participated in One-week Short Term Course on “Factory of Future:Present and Future Perspectives” funded by PM-USHA Scheme, Government of India, organized by Shri Mata Vaishno Devi University, Katra, Jammu from 24^th - 28^th February 2025
• Participated in a Seminar on “Aerospace Technologies in Defence Sector – An Overview” Co-Hosted by Systems and Systems Engineering Panel, ARDB, DRDO & BIT Mesra, Ranchi on November 28^th, 2024
• Completed One week Faculty Development Program on “Revolutions in Materials Science for Mechanical Engineering Applications” organised by HIT, Haldia from 18^th – 23^rd November 2024
• Participated in the 5 Days FDP on “Future of Mechanical Engineering: AI and Its Transformative Impact” organized by Techno India University, West Bengal from 17^th - 21^st September 2024
• Attended the Independence Day Webinar on “Creating IP Led Academic Spinoffs” conducted by Turnip Innovations and Qualcomm on August 12, 2024
• Attended the 5 Days Workshop on “The Future of Green Energy: Emerging Trends and Technologies” organized by Department of Mechanical Engineering NIT Mizoram from August 5 - 9, 2024
• Participated in One-week Short Term Programme on “Sustainable Product Design and Manufacturing” under Pandit Madan Mohan Malaviya National Mission on Teachers and Teaching of Ministry of Education, Government of India, organized by Shri Mata Vaishno Devi University, Katra, Jammu from July 22 - 27 2024
• Participated in One week FDP on “AI/ML tools for Advanced Materials, Manufacturing and Thermal systems” organized by LBRCE, Mylavaram, Hyderabad from June 24 – 28, 2024
• Participated in 3 Days FDP on “Emerging Trends in design, Materials and Manufacturing” organized by DIT, Kolkata from 23^rd - 25^th May 2024
• Participated in One Week FDP on “DreamWeaving II: The Art of Entrepreneurial Success” organized by Regent Education & Research Foundation from 21^st - 25^th May 2024
• Participated in the One Day National level FDP on “Research paper writing tools” organized by ACE Engineering College, Hyderabad on May 10^th, 2024
• Attended a “World IP Day Webinar 2024” organized by TURNIP Innovations supported by Qualcomm on theme Intellectual Property and SDGs on April 26^th, 2024
• Participated in the 5 Days workshop on “The Applications of Engineering Concepts and Practices to Medical Fraternity for Future Generations” organized by Department of Mechanical Engineering, NIT Manipur from 20^st - 24^th April 2024
• Participated in the 5 Days FDP on “Industry 4.0: Technological Evolution” organized by Department of Mechanical Engineering TCE Agartala from 01^st - 05^th April 2024
• Participated in an FDP on “NEP-2020 Orientation and Sensitization” under Malaviya Mission Teacher Training Programme of University Grants Commission (UGC) Organized by University of Hyderabad from 18^th - 26^th March 2024
• Participated in the 5 Days International Workshop on “3D printing & Additive Manufacturing Insights” organized by Department of Mechanical Engineering NIT Mizoram from 12^th - 16^th March 2024
• Participated in 5-days Workshop on “IPR Awareness and Skill Development with special reference to Patents & Start-Ups” MISTIC sponsored organized by NIT Mizoram from 16^th - 20^th March 2024
• Participated in a FDP on “Green Manufacturing” under Pandit Madan Mohan Malaviya National Mission on Teachers and Teaching of MoE, Government of India, organized by Shri Mata Vaishno Devi University, Katra, Jammu from March 04 - 08, 2024
• Participated in a 5-day Workshop on “Multiple Attribute Decision Making Using Analytic Hierarchy Process” organized by NIT Mizoram from February 26 to March 1, 2024
• Completed 3-Day Workshop on “Career in Intellectual Property Rights” organized by TURNIP Innovations and DPIIT IPR Chair, NALSAR University from December 18-20, 2023
• Participated in one-day National Seminar (Web) Ancient Indian Science and Technology (AIST 2023) Organized by National Institute of Technical Teachers’ Kolkata on September 30, 2023
• Participated in “National Intellectual Property Awareness Training program” under National Property Awareness Mission organized by Intellectual Property Office India and CSIR India (As a part of the National IP Festival under Azadi Ka Amrit Mahotsav) on July 31, 2023
• Participated in a Webinar on “Higher Education Opportunities & Applications of Spatial AI Include ROBOT Navigation, Self-Driving Cars, Computer Vision & Quality Control in Production” organized by Yuan Ze University, Taiwan on July 14, 2023
• Participated in One-day Workshop on “Enriching the quality of Teaching-Learning Process in the Present Scenario” organized by the Value Education Cell, BIT Mesra, Ranchi on May 8, 2023
• Attended a Short-term course on “Characterization and Testing of Components Following Laser Materials Processing including Surface Engineering and Additive Manufacturing” organized by IIT, Kharagpur in association with BIT Mesra, Ranchi & INAE, New Delhi on March 18-26, 2023
• Participated in one-day Seminar cum Workshop on “Struggles to Accomplishments - A Journey of Empowerment” organized by ICC, BIT Mesra, Ranchi on March 22, 2023
• Participated in one-day Workshop in “Intellectual Property Commercialisation” organized by TURNIP on January 21, 2023
• Participated in “Intellectual Property Awareness/Training program” under National Property Awareness Mission organized by Rajiv Gandhi National Institute of Intellectual Property Management (RGNIIPM), Nagpur India (Under National Intellectual Property Awareness Mission) on August 3, 2022
• Attended the FULL AGENDA of Department of Science & Technology AND American Chemical Society WORKSHOP organized by Department of Chemistry, BIT, Mesra, Ranchi on July 19, 2022
• Participated in “Intellectual Property Awareness/Training program” under National Property Awareness Mission organized by Intellectual Property office Delhi, India on April 28, 2022
• Participated in “Intellectual Property Awareness/Training program” under National Property Awareness Mission organized by Intellectual Property office Kolkata, India on March 23, 2022
• Participated in a One day Webinar on WASTE-2-WEALTH organized by Department of Chemical Engineering, BIT, Mesra, Ranchi on March 12, 2022
• Participated in Six days Faculty Development Programme on Mentors Program and its Benefits in Technical Institution Organized by Department of Production Engineering, NIT Agartala sponsored by AICTE from March 7 - 12, 2022
• Participated in a Workshop on Gender Sensitization Towards Workplace Etiquettes at BIT, Mesra, Ranchi on March 08, 2022
• Participated in a Workshop on Aeroelasticity, Active vibration control and Finite element analysis organised by Department of Mechanical Engineering at IIT (ISM) Dhanbad from January 21-22, 2022
• Participated in a Workshop on Computational Chemistry, Molecular Modeling, Drug Design and Biologics organized by Department of Chemistry & Schrodinger, BIT Mesra, Ranchi from December 21 - 23, 2021
• Participated in the Short-Term Training Programme (STTP) on Techniques of Design, Analysis and Retrofitting of Skyscrapers Organized by Department of Architecture & Planning, BIT Mesra, Ranchi from December 13 -17, 2021
• Participated in a  Mathematics Seminar on Sciences & Engineering Applications supported by TEQIP – III organised by Department Mathematics, BIT, Mesra, Ranchi from February 12 - 13, 2021
• Participated in the National Seminar (Web) Ancient Indian Education System Organized by National Institute of Technical Teachers’ Kolkata on November 11 -12, 2020
• Attended a Webinar on Mechanical Engineering Solutions to Biomedical Problems organised by Department of Mechanical Engineering supported by TEQIP – III at IIT (ISM) Dhanbad from September 24-27, 2020
• Participated in the 3^rd National Seminar (web) on Atmanirbhar Bharat: Environmental Sustainability Organized by National Institute of Technical Teachers’ Kolkata in collaboration with knowledge partner SPIU, Uttar Pradesh on August 16, 2020
• Participated in the 9^th National Seminar (web) Ancient Indian Science and Technology Organized by National Institute of Technical Teachers’ Kolkata in collaboration with knowledge partner SPIU, Uttar Pradesh on July 13, 2020
• Participated in a Webinar on Impact of COVID - 19 on Mental Health and Well Being organised by Department of Bioengineering, BIT, Mesra, Ranchi on August 8, 2020
• Participated in AICTE sponsered One Week Short Term Training Program on Recent Advances in Materials and Manufacturing Part I Conducted by GVPCE, Vishakapatnam on August 3-8, 2020
• Participated in One Week Faculty Development Programme on Artificial Intelligence and Machine Learning in Healthcare Organized by Department of Bioengineering and Electronics & Communication Engineering, BIT, Mesra, Ranchi on July 27-31, 2020
• Participated in One-Day Webinar on challenges Involved in Simulating Complex Systems Organized by Department of Physics, BIT, Mesra, Ranchi on July 25, 2020
• Participated in the 9^th National Seminar (Web) Ancient Indian Science and Technology Organized by National Institute of Technical Teachers’ Kolkata in collaboration with knowledge partner SPIU, Uttar Pradesh on July 13, 2020
• Participated in a Webinar on Additive Manufacturing in Biomedical Application Organized by LNCTS, Bhopal on June 13, 2020
• Participated in a Three-day Faculty Development Programme on Application of Reverse Engineering and Additive Manufacturing in Biomedical Engineering Organized by OCT, Bhopal on June 10-12, 2020
• Participated in a one-day Workshop on Teaching Learning in a Digital Age: MOOCS supported by TEQIP – III at BIT Mesra, Ranchi on September 13, 2019
• Participated in one Week Workshop on Concepts and Applications of the Finite Elements Method supported by TEQIP – III at IIT Hyderabad from September 2-7, 2019
• Participated in a one Day Workshop on Awareness of Fire Safety supported by NRB DRDO at BIT Mesra, Ranchi on March 29, 2019 
• Participated in a one Week Workshop on Emerging Techniques in Mechanical Engineering and its Applications supported by TEQIP – III at BIT Mesra, Ranchi from March 5-9, 2019 
• Attended Summer Training Program on Active Learning Under TEQIP – III Initiative (MHRD, Govt. of India) at IIT Gandhinagar from June 18-22, 2018
• Attended Workshop on Academic Writing: Grants, Consultancy & Research Articles supported by TEQIP – III at BIT Mesra, Ranchi from December 13-15, 2017
•  Attended a Workshop for Faculty-Mentors on Induction Programme for New Students supported by TEQIP – III at IIT (BHU) Varanasi from September 15-17, 2017
• Attended One-week Jharkhand Council of Science & Technology, Ranchi sponsored “National Workshop on Intelligent Computational Technique Applications” organized by Department of Electrical & Electronics Engineering, BIT Mesra Ranchi  from November 23-27, 2015
• Attended One-week TEQIP-II sponsored Short-term training program on “Lean Six Sigma tools and applications” organized by Department of Production Engineering, BIT Mesra Ranchi from May 25-29, 2015
•  Attended a Workshop on “Intellectual Property Rights” organized by BIT Mesra Ranchi & Controller General of Patents, Design and Trade marks, Government of India on December 02, 2011
• Attended a Workshop on “Quality Enhancement for Teachers in Engineering Education through NPTEL” organized by Centre of Education Technology, IIT Kharagpur from November 16-17, 2011
• Participated in a Workshop Mission KYaaT (Know Yourself as a Teacher) organized by Internal Quality Assurance Cell, BIT Mesra Ranchi from 03-05 May 2011
• Completed a short-term course on Futuristic Nanocomposites conducted by Department of Mechanical Engineering and Materials Science Programme at IIT Kanpur from December 08-12, 2008
• Participated in a workshop on Effective Teaching at BIT Mesra Ranchi from August 05-09, 2008
• Attended a National Workshop on Research and Development in Emerging areas of Locomotor Disability organized by Department of Mechanical Engineering, BIT Mesra Ranchi and National Institute for the Orthopedically Handicapped, Kolkata from March 14-15, 2008
• Attended a short-term course on Design and Development of Advanced Materials sponsored by TEQIP at BIT Mesra Ranchi from March 23-27, 2007
• Attended a National Seminar on Achieving Technological Excellence in the Millenium Opportunities and Challenges (ATENM’2007) organized by Department of Mechanical Engineering, BIT Mesra Ranchi from  January 23-24, 2007
• Participated in a workshop on “Automobile Engineering Systems” sponsored by TEQIP and organized by Department of Mechanical Engineering, BIT Mesra Ranchi from September 06-11, 2006
• Undergone a training program for PLC Design of ISA The Instrumentation, Systems & Automation Society organized by Department of Electronics & Communication Engineering, BIT Mesra Ranchi from May 07-13, 2006

• Fellow of Institution of Engineers (India) (F - 1310212)
• Member of the Indian National Academy of Engineering (INAE/Ind M/069)
• Life Member of Indian Society of Mechanical Engineers IIT. Delhi (L - 0529)
• Life Member of Indian Society of Technical Education (India) (LM - 56295)
• Life Member of the Association for Machines and Mechanisms, IISc. Bangalore (A20230003)
• Life Member of Materials Research Society of India IISc. Bangalore (LMB3832)
• Life Member of Tribology Society of India (LM - 6300)
• Life Member of The Indian Science Congress Association, DST, GoI (L42678)
• Life Member of Electron Microscope Society of India (LM - 2331)
• Life Member of Powder Metallurgy Association of India (L00757)
• Life Member of The Indian Carbon Society (LM 729)
• Member of International Association of Engineers (337695)
• Member of American Chemical Society (33249072)
• Associate Member of the International Society for Development and Sustainability, JAPAN

PATENTS

• Rahul, Sujeet Kumar Mishra, Deepak Kumar, Pankaj Kumar Dubey, Vikash Kumar Gorain, Yash Raj Mishra, Wall-Mounted Foldable and Ventilated Laptop Workstation, Design No. 453257-001 dated 27/03/2025, Published on 25.06.2025   “This innovative design presents a space-saving, foldable workstation that can be easily mounted on a wall and serves as a convenient, ergonomic platform for laptop use. Designed with modern urban living and compact workspaces in mind, it addresses the need for a portable yet stable work surface that blends aesthetic appeal with functional efficiency”

• Design No. 455301-001 dated 14/04/2025, Filed
• Design No. 470026-001 dated 18/08/2025, Filed

• Fellow of Institution of Engineers (India) (F - 1310212)

Reviewer of the following International Journals

1. 1. Polymer Composites – Impact Factor 4.8 (Wiley USA)
   2. Journal of Applied Polymer Science - IF 3.0 (Wiley USA)
   3. Materials Today: Proceedings (Elsevier)
   4. Journal of Engineering and Technology Development (SCRIPTION Publishers Inc, USA)
   5. Materials Science, Engineering and Applications (JVE Journals, Lithuania)
   6. World Journal of Engineering (Emerald Publishing, UK)