PROFESSIONAL QUALIFICATION:

• Ph.D (Engineering), B.I.T. Mesra, Ranchi
• ME(Automated Manufacturing System), B.I.T. Mesra, Ranchi
• BE (Production Engineering), B.I.T. Mesra, Ranchi 

PROFESSIONAL EXPERIENCE:

• Professor, Dept. of Production & Industrial Engg., BIT Mesra, Ranchi [01/09/2024 to till date] 
• Associate Professor, Dept. of Production Engg., BIT Mesra, Ranchi [01/06/2010 to 31/08/2024] (Experience: 14 Years ; 02 Months)
• Reader, Dept. of Production Engg., BIT Mesra, Ranchi [01/06/2007 to 31/05/2010] (Experience: 3 Years)
• Senior Lecturer, Dept. of Production Engg., BIT Mesra, Ranchi [01/10/2005 to 31/05/2007] (Experience: 1 Year ; 8 Months)
• Assistant Professor, Dept. of Production Engg., BIT Mesra, Ranchi [01/07/2001 to 30/09/2005] (Experience: 4 Years ; 3 Months)
• Associate Lecturer, Dept. of Production Engg., BIT Mesra, Ranchi [04/03/1997 to 30/06/2001] (Experience: 4 Years ; 4 Months)

ADMINISTRATIVE WORK EXPERIENCE:

• Dean, Undergraduate Studies (DUGS), BIT Mesra, Ranchi. (01/01/2024 to till date)
• Controller of Examinations, BIT Mesra, Ranchi. (01/01/2021 to 31/12/2023)
• Head of Department, Dept. of Production Engineering, BIT Mesra, Ranchi. (10/05/2017 to 31/12/2020)
• Admission Coordinator, BIT Mesra, Ranchi. (18/06/2014 to 09/05/2017)
• Prof-in-charge Workshop, BIT Mesra, Ranchi.  (19/07/2010 – 05/08/2014)

OTHER EXPERIENCE:

Served as,

• Vice President, Birla Institute of Technology Old Students Association (BITOSA).
• Secretary, Indian Institution of production Engineers, Jharkhand State Chapter.
• Council Member, Indian Value Engineering Society (EZC).

EXPERIENCE: 27  Years of experience in teaching and research

RESEARCH AREAS:

• Artefacts / Brassware manufacturing.
• Friction Stir welding, Vibration-assisted shielded metal arc welding, Underwater friction Stir welding.
• Green manufacturing.
• Micro EDM drilling.
• Human Factor Engineering.

RESEARCH GUIDANCE:

• 07 PhD awarded.
• 17 ME/MTech Dissertations.

1. Awarded Best paper at NCMCTC 2000 (National conference on manufacturing challenges in 21st century) in IT-BHU, Varanasi for research paper entitled “Robotics and Manufacturing Automation”.
2. Awarded TOYT 2005 (The Outstanding Young Technocrat) during national foundry day celebration. Received the award by the Chief Minister of Jharkhand.
3. Received “Best Professor in Production Engineering Studies” award at 27th Business School Affaire & Dewang Mehta National Education Awards programme held at Jaipur on 1st July 2019.
4. Session Chaired, “Rolling of flat products”, International conference on rolling finishing technology of steel, R&D SAIL, Ranchi, 4th-6th October, 2012.
5. Session Chaired, “Domains of automation with illustrative applications”, All India seminar on Technology solutions in manufacturing, IE & BIT Mesra, Ranchi, 1st–2nd March,2013.
6. Session Chaired, “Industrial & Production Engineering”, 1st International conference on Advancements and recent innovations in Mechanical, Production and industrial engineering (ARIMPIE – 2015), ITS Engg. College, Greater Noida, 10th-11th April, 2015.
7. Keynote Lecture, 2nd International conference on Advancements and recent innovations in Mechanical, Production and industrial engineering (ARIMPIE – 2016), ITS Engg. College, Greater Noida, 15th-16th April, 2016.
8. Session Chaired, All India seminar on “Tribology as Energy saver for Mining, Steel and other Heavy Industries”, IE(I) & Tribology Society of India, 28th–29^th September, 2019.
9. Session Chaired, 2nd International conference on Future Learning Aspects of Mechanical Engineering(FLAME 2020), Amity University, Uttar Pradesh, 05th to 08th August,2020.
10. Organizing Secretary of National conference on “Value engineering – A fast track to Profit Improvement and Business Excellence”, jointly organized by the Department of Production Engineering, Birla Institute of Technology, Mesra, Ranchi and Indian Value Engineering Society (EZC), Jamshedpur, 26^th – 27^th of July 2003.
11. Organizing Secretary of National workshop on “Lean Manufacturing Implementations” organized by Indian Institution of production Engineers, Jharkhand State chapter, 8th – 9th of September 2006.
12. Organizing Secretary of National seminar on “Best practices in manufacturing”, organized by the Department of Production Engineering, Birla Institute of Technology, Mesra, Ranchi and The Institution of Engineers, Jharkhand State Center, 9th – 10th of December 2006.
13. Jt. organizing Secretary of National workshop on “Technological excellence through Value engineering”, jointly organized by the Department of Production Engineering, B.I.T Sindri, Dhanbad and Department of Production Engineering, B.I.T Mesra, Ranchi, 7th of April 2007.
14. Organizing Secretary of Second National Workshop on “Precision Forming Emerging Trends in Forming Technology”, organized by the Department of Production Engineering, Birla Institute of Technology, Mesra, Ranchi, 9th – 10th of January 2009.
15. Coordinator of One-week Quality Improvement Training Programme on “Machining”, organized by the Department of Production Engineering, Birla Institute of Technology, Mesra, Ranchi, 23rd – 27th of June 2014.
16. Coordinator of One Day Workshop on “Business Process Simulation”, organized by the Department of Production Engineering, Birla Institute of Technology, Mesra, Ranchi, 06th February 2015.
17. Convenor of two-Day Workshop on “Data Analytics for Engineers”, organized by The Institution of Engineers, Jharkhand State Centre, Ranchi, 26th – 27th of August 2017.

RESEARCH PUBLICATIONS

1. RESEARCH PAPER (INTERNATIONAL JOURNAL)

2024

1. Ram Babu Verma & Sanjay Kumar Jha, “Prioritization of major industrial wastes using Analytical Hierarchy Process for Micro Small Medium Enterprises”, International Journal of Environment and Waste Management, Volume: 35, No: 1, PP: 69-97, September 2024 (Scopus; Publisher : Inderscience). 
2. B. Vijaya Prakash, Nitish Kaushik, Sanjay Kumar Jha, Karuppasamy Ramasamy, “Additive Manufacturing of Composite Materials and Functionally Graded Structures Using Archerfish Hunting Technique”, Lubrication Science, Published Online, August 2024. (https://doi.org/10.1002/ls.1716, ISSN: 1557-6833; IF:0.36; Scopus; SCI; Publisher: Wiley).
3. Rajeev Ranjan, Sanjay Kumar Jha & Ajay Kumar, “Enhancing hardness in SMAW welded joints with low-frequency vibration assistance: an experimental and analytical study”, Journal of Adhesion Science and Technology, Published Online, June 2024. (https://doi.org/10.1080/01694243.2024.2371227, ISSN: 1568-5616; IF:2.3; Scopus; SCI; Publisher: Taylor & Francis).
4. Ravi Shankar Anand, Nishant, Sanjay Kumar Jha & Prashant Prakash,“ Numerical prediction of tool rotation speed for optimum mechanical properties of weld joint in friction stir welding of dissimilar aluminum alloy”, Journal of Materials Engineering and Performance, Published Online, May 2024. (https://doi.org/10.1007/s11665-024-09628-8, ISSN:1059-9495; SJR: 2.3; Scopus; SCI; Publisher: ASM International, Springer New York LLC).
5. Rajeev Ranjan & Sanjay Kumar Jha “ Experimental Investigation and optimization of impact strength during low frequency vibration assisted shielded metal arc welded joints”, Welding International, Published Online, April 2024.  (https://doi.org/10.1080/09507116.2024.2336248, Scopus; Publisher: Taylor & Francis).
6. Rajeev Ranjan & Sanjay Kumar Jha, “Investigation of Post weld heat treatment on Mechanical properties of Low frequency vibration assisted SMAW mild steel welded joints”, International Journal on Interactive Design and Manufacturing, Published Online, April 2024. (https://doi.org/10.1007/s12008-024-01793-3; ISSN:1955-2505; Scopus; Publisher: Springer Nature).
7. Nishant, Sanjay Kumar Jha & Prashant Prakash, “Experimental investigation of Mechanical Properties in Friction Stir Welding for Butt Joints with different Thicknesses using Response Surface  Methodology”, Transactions of the Indian Institute of Metals, Published Online, February 2024. (ISSN: 0975-1645; IF:1.6; Scopus; SCIE; Publisher: Springer).

2023

1. Rajeev Ranjan , Sanjay Kumar Jha, & Tushar Sonar, “Investigation of welding parameters on impact strength of low frequency vibration assisted butt-welded joints using Taguchi methodology”, International Journal on Interactive Design and Manufacturing, Published Online, November 2023.  (doi.org/10.1007/s12008-023-1674 -1, ISSN:1955-2505; Scopus; Publisher: Springer Nature)
2. K P Yuvaraj, A Shobana, Nitish Kaushik, Addisu Boshe Botto, and Sanjay Kumar Jha, “An experimental method for choosing the tool pin profile and shoulder size to join dissimilar aluminum alloys AA7075-T651 and AA6061-T6 joints”, Materials Research Express, Vol :10, No:11, PP:1-11, November, 2023.(DOI 10.1088/20531591/ad0936,ISSN: 2053-1591; IF:2.3; Scopus; SCI;  Publisher: IOP Publishing Ltd).
3. Rajeev Ranjan & Sanjay Kumar Jha, “Optimization of welding parameters and microstructure analysis of low frequency vibration assisted SMAW butt welded joints”, International Journal on Interactive Design and Manufacturing, Published Online, October, 2023.   (doi.org/10.1007/s12008-023-01562-8, ISSN:1955-2505; Scopus; Publisher: Springer Nature)
4. Nishant, Sanjay Kumar Jha & Prashant Prakash,“ Numerical Analyses of Underwater Friction Stir Welding Using Computational Fluid Dynamics for Dissimilar Aluminum Alloys”, Journal of Materials Engineering and Performance, Published Online, October,2023. (ISSN:1059-9495; SJR: 2.3; Scopus; SCI; Publisher: ASM International, Springer New York LLC)
5. Nitish Kaushik, Sanjay Kumar Jha & Ravi Shankar Anand, “Effect of input process parameters on MRR in micro EDM drilling of CFRP sheet using RSM”, Materials Today: Proceedings, Published Online, October, 2023.(ISSN:2214-7853; SJR : 0.299; Scopus; Publisher : Elsevier). 
6. Nishant, Sanjay Kumar Jha & Prashant Prakash, “Effect of tool rotation speed on mechanical properties of underwater friction stir welding of 6061-T6 and 5083-H12 aluminium alloys”, Materials Today : Proceedings, Vol:91, Part:01 ,PP:138-142, September , 2023, (https://doi.org/10.1016/j.matpr.2023.05.727, ISSN:2214-7853; SJR: 0.299; Scopus; Publisher: Elsevier)
7. Nishant, Sanjay Kumar Jha & Prashant Prakash, “Effect of tool rotation speed on microstructure and mechanical properties of underwater friction stir welding 6061 aluminium alloy”, Materials Today:Proceedings, Vol:91, Part:1, PP:09-13, September, 2023. (https://doi.org/10.1016/j.matpr.2023.03.753, ISSN:2214-7853; SJR: 0.299; Scopus; Publisher: Elsevier)
8. Nitish Kaushik, Sanjay Kumar Jha & Ravi Shankar Anand, “Size effect of electrode diameter on the hole quality in micro EDM drilling of CFRP composite”, Materials Today: Proceedings, Vol:91, Part:01, PP:56-61, September 2023. (doi.org/10.1016/j.matpr.2023.05.025, ISSN: 2214-7853; SJR:0.299; Scopus; Publisher: Elsevier)
9. Rajeev Ranjan & Sanjay Kumar Jha, “Effect of low frequency vibration-assisted shielded metal arc welding on the properties of mild steel”, Welding International, Vol:37, NO:08, PP: 437-444, September, 2023. (https://doi.org/10.1080/09507116.2023.2251377,ISSN:1754-2138; SJR: 0.15; Scopus; Publisher: Taylor & Francis).
10. Prashant Prakash, Anand. R. S, & Sanjay Kumar Jha, “Experimental Analysis of Tensile Strength of Different Thicknesses and Dissimilar Aluminum Alloys in Friction Stir Welding”, Journal of Materials Engineering and Performance, Vol:32, ISSUE:17, PP:8014-8023, September,2023. (https://doi.org/10.1007/s11665-022-07694-4, ISSN:1059-9495; SJR: 2.3; Scopus; SCI; Publisher: ASM International, Springer New York LLC).
11. Nitish Kaushik, Sanjay Kumar Jha & Ravi Shankar Anand, “Experimental investigation of micro EDM drilling in the CFRP using response surface methodology”, Frontiers in Materials; PP:1-12,Vol:10,June,2023.(https://doi.org/10.3389/fmats.2023.1147882;ISSN:2296-8016; SJR:3.985; Scopus; SCI; Publisher: FRONTIERS MEDIA SA ).
12. Shatrudhan Pandey, Karan Kumar Mishra, Pampa Ghosh, Abhishek Kumar Singh & Sanjay Kumar Jha, “Characterization of tin-plated steel”, Frontiers in Materials; PP:1-10, Vol:10, January, 2023. (doi.org/10.3389/fmats.2023.1113438; ISSN:2296-8016; SJR:3.985; Scopus; SCI; Publisher: FRONTIERS MEDIA SA ).

2022

1. Sanjay Kumar Jha, Ravi Shankar Anand & Prashant Prakash, “Effect of the Process Parameters on the Mechanical Properties of the Weld Joint in the Friction Stir Welding Process”, International Journal of Materials Engineering Innovation, Vol:13, No:02, PP: 110-127, July, 2022. (doi.org/10.1504/IJMATEI.2022.10048984; ; Scopus; Publisher: Inderscience).
2. Prashant Prakash, Anand. R. S, & Sanjay Kumar Jha, “Correlation between heat generation and mechanical properties in friction stir welding”, Materials Today: Proceedings, Vol:62,Part: 10, PP: 6246 – 6250, July, 2022. (https://doi.org/10.1016/j.matpr.2022.05.331, ISSN:2214-7853; SJR: 0.299; Scopus;  Publisher: Elsevier).
3. Rajeev Ranjan & Sanjay Kumar Jha, “Effect of Vibration on Weld Quality and Properties in Vibration Assisted Welding: A Review”, International Journal of Mechanical Handling and Automation, Vol:08, Issue:02, PP:01-09,April, 2022. (Publisher: JournalsPub)

2021

1. Ram Babu Verma & Sanjay Kumar Jha, “Application of standardization to increase the competitiveness of tools and die manufacturing firms - a case study”, Journal of Jilin University (Engineering and Technology Edition), Vol:40, Issue:08, PP:57-86, 2021. ( doi.org/10.17605/OSF.IO/Y8HQM; Scopus; Publisher: Jilin Daxue Xuebao).
2. Ram Babu Verma & Sanjay Kumar Jha, “Adaptation of standardized practices in tool and die manufacturing to increase the competitiveness of micro, small, and medium enterprises - a case study”, Journal of Manufacturing Technology Research, Vol:14, Issue:1-2, PP:75-93, 2021. (ISSN: 1943-8095, Scopus, Publisher: Nova Science Publishers, Inc.).
3. Shailesh Dewangan, S. Deepak Kumar, & Sanjay Kumar Jha, “Prediction of formability of MIG and TIG welded joints by Erichsen cupping test and fuzzy-logic technique”, International Journal of Materials Engineering Innovation, Vol:12, No:3, PP:246-258, August,2021. (https://doi.org/10.1504/IJMATEI.2021.10039983,Scopus;Publisher: Inderscience).

2020

1. Ravi Shankar Anand, Prashant Prakash, Sanjay Kumar Jha, & Abhishek Kumar Singh “Numerical investigations of effect of input process parameters on heat generation in friction stir welding”, Materials Today: Proceedings, Vol:33, Part:8, PP:5354-5361,December,2020. (https://doi.org/10.1016/j.matpr.2020.03.113; ISSN: 2214-7853; SJR: 0.299; Scopus; Publisher: Elsevier).
2. Deepak kumar, Shailesh Dewangan, Sanjay Kumar Jha, & A. Mandal “Optimization of dry sliding wear parameters of thixoformed A356-5TiB2in-situ composites using RSM”, Materials Today: Proceedings, Vol:33, Part-8, PP:5061-5065, December,2020.(https://doi.org/10.1016/j.matpr.2020.02.844; ISSN: 2214-7853; SJR: 0.299; Scopus; Publisher: Elsevier).
3. Prakash Kumar, Anil Kumar, Chandan Pandey, Shailesh Dewangan and Sanjay Kumar Jha, “Materials for energy harvesting with a nonlinear energy sink: A literature review”, Materials Today: Proceedings, Vol:33, Part:8, PP: 5632-5637, December, 2020. (https://doi.org/10.1016/j.matpr. 2020.03.795; ISSN: 2214-7853; SJR: 0.299; Scopus; Publisher: Elsevier).
4. Nitish Kaushik, Prakash Kumar, Joyjeet Ghose, and Sanjay Kumar Jha, “Study of mechanical properties of Al2014-B4C-Gr hybrid nano composite”, Materials Today: Proceedings, Vol:33, Part:8, PP:5573-5576, December, 2020.(https://doi.org/10.1016/j.matpr.2020.03.560; ISSN: 2214-7853; SJR: 0.299; Scopus; Publisher: Elsevier).
5. Shailesh Dewangan, S. Deepak kumar, Sanjay Kumar Jha, and Chandan Kumar Biswas, “Optimization of Micro-EDM drilling parameters of Ti–6Al–4V alloy”, Materials Today: Proceedings, Vol:33, Part:8, PP: 5481-85, December, 2020. (doi.org/10.1016/j.matpr.2020.03.307;  ISSN: 2214-7853; SJR: 0.299;  Scopus;  Publisher: Elsevier).
6. Deepak Kumar, Shailesh Dewangan, Joyjeet Ghose & Sanjay Kumar Jha,  “Optimization of EDM Process Parameters of Thixoformed A356-5TiB2 In Situ Composites”, Materials Science Forum, PP:271–276, Vol:978, February, 2020.(doi.org/10.4028/www.scientific.net/MSF.978.271;  ISSN: 1662-9752 ; SJR: 0.17;  Scopus;  Publisher: Trans Tech Publications Ltd, Switzerland).
7. Prashant Prakash, Anand. R. S, & Sanjay Kumar Jha, “Effect of Weld Zone Shape on Microstructure and Tensile Properties in Friction Stir Welding Process”, Materials Science Forum, PP : 84-90, Vol : 978, February, 2020. (doi.org/10.4028/www.scientific.net/MSF.978.84; ISSN: 1662-9752 (Online); 0255-5476 (Print) SJR: 0.17; SCOPUS; Publisher: Trans Tech Publications Ltd, Switzerland).
8. Prakash. P, Anand. R. S. & Sanjay Kumar Jha, “Prediction of Weld Zone Shape with effect of Tool Pin Profile in Friction Stir Welding Process”, Journal of Mechanical Science and Technology; PP:279-287, Vol:34, Issue:1, January, 2020. (doi.org/10.1007/s12206-019-1229-6; ISSN: 1738-494X (Print) 1976-3824 (Online); SJR:1.221; Scopus; SCI; Publisher: KSME, Springer).

2019

1. Deepak Kumar, Shailesh Dewangan, & Sanjay Kumar Jha, “Tribo-performance of Thixoformed A356-5TiB2   in-situ Composites”, IOP Conf. Series: Materials Science and Engineering, PP:1-5, Vol:653, 2019. (doi.org/10.1088/1757-899X/653/1/012045, Online ISSN: 1757-899X, Print ISSN: 1757-8981, Scopus, publisher: IOP Publishing).
2. Prakash. P, Sanjay Kumar Jha and Lal. S. P, “Numerical investigation of stirred zone shape and its effect on mechanical properties in friction stir welding process”, Welding in the World, International Institute of Welding, PP:1531-1546, vol:63, Issue:6, November,2019. (doi.org/10.1007/s40194-019-00787-0; ISSN: 0043-2288 (Print) 1878-6669 (Online); SJR: 0.71; Scopus; SCI; Publisher: Springer Nature).
3. Malhotra. A, Rajak. S and Sanjay Kumar Jha, “An Eco-Innovative Green Design Method by QFD and TRIZ Tools- A Case Study of Brass-Ware Manufacturing”, Pertanika Journal of Science and Technology, PP:2109-2121, Vol:27, No.4, October,2019. (ISSN: 0128-7680;  ESCI, Scopus; Impact Factor: 0.12; Publisher: UPM Press).
4. B. Verma and Sanjay Kumar Jha, “Implementation of 5S Framework and Barriers modelling through Interpretive Structure Modelling in a Micro Small Medium Enterprise”, International Journal of Recent Technology and Engineering, PP:7010-7019, Vol:8, Issue:3, September,2019.(doi.org/10.35940/ijrte.C6041.098319; ISSN: 2277-3878; Scopus; Publisher: Blue Eyes Intelligence Engineering & Sciences Publication).
5. Deepak Kumar, Sanjay Kumar Jha, D. Karthik and A. Mandal “Fatigue Analysis of A356-TiB2 (5wt%) in-situ Nano composites”, Materials Today: Proceedings, Vol:18, Part:3, PP:774-779, September, 2019.(https://doi.org/10.1016/j.matpr.2019.06.494; ISSN: 2214-7853; SJR: 0.299; Scopus; Publisher: Elsevier).

2006 - 2018

1. Abhilash, V. Sudheer Kr, Acherjee. B, Sanjay Kumar Jha and S. Deepak. Kr, “Simulation of Friction Stir Welding Process Using Ansys”, International Journal of Advance and Innovative Research, PP: 98-102, Vol:5, No:2, June, 2018. (ISSN: 2394-7780).
2. Prakash. P, Sanjay Kumar Jha and Lal. S. P, “Effect of Tool-Pin Profile on Weld Zone and Mechanical Properties in Friction Stir Welding of Aluminium Alloy”, Pertanika Journal of Science and Technology, PP:853-862, Vol:26, No:2, April, 2018. (ISSN: 0128-7680; ESCI, Scopus; Impact Factor: 0.12; Publisher: UPM Press).
3. Pandey. S, Parhi. S, and Sanjay Kumar Jha, “Effect of the Mould Rotational Speed on the Quality of Bimetallic Pipe Fabricated by Centrifugal Casting Process”, International Journal of Emerging Research in Management and Technology, PP: 215-222, Vol:6, No:7, July, 2017. (doi.org/10.23956/ijermt.v6i7.214, ISSN: 2278-9359).
4. Prakash. A, Sanjay Kumar Jha, Prasad. K. D, & Singh. A “Productivity, Quality and Business Performance: An Empirical Study”, International Journal of Productivity and Performance Management, Vol:66, PP: 78-91 Issue:1, January,2017. (https://doi.org/10.1108/IJPPM-03-2015-0041; ISSN: 1741-0401; SJR: 0.79; ESCI, Scopus; Publisher: Emerald
5. Prasad. K. D, Sanjay Kumar Jha and Singh. R. K, “Implementation of Quality Improvement Tools in Brassware Manufacturing Unit to Improve Quality & Enhance Productivity”, International Journal of Applied Engineering Research, PP:3580-3590, Vol:11, No:5, March,2016. (https://doi.org/:10.37622/000000, ISSN: 0973-4562;  Scopus; Impact Factor: 0.127;Publisher: Research India Publications ).
6. Manoharan. P. K, Sanjay Kumar Jha and Singh. B. K, “Analysis of Load And Gradient Effect on Hand Force Responses During Brick Carrying in A Brick Kiln”, International Journal of Applied Engineering Research, PP:35332-35336, Vol:10, No:15, August,2015. (https://doi.org/:10.37622/000000, ISSN:0973-4562; Scopus; Impact Factor: 0.127; Publisher: Research India Publications).
7. Prasad. K. D, Sanjay Kumar Jha and Prakash. A, “Quality, Productivity and Business Performance in Home Based Brassware Manufacturing Units”, International Journal of Productivity and Performance Management, Vol: 64, PP: 270-287, Issue:2, February, 2015. (http://dx.doi.org/10.1108/IJPPM-02-2014-0029; ISSN: 1741-0401; SJR: 0.79;  ESCI,  SCOPUS; Publisher: Emerald).
8. Singh. A. K, Sanjay Kumar Jha, and Prakash. A, “Adoption of Green Manufacturing (GM) in Selected Indian Industries”, International Journal of Applied Engineering Research, PP:20383-20404, Vol:9, No:23, December,2014. (doi.org/:10.37622/000000, ISSN: 0973-4562 ; Scopus ;  Impact Factor: 0.127; Publisher: Research India Publications).
9. Singh. A. K, Sanjay Kumar Jha and Prakash. A, “Green Manufacturing (GM) Performance Measures: An Empirical Investigation from Indian MSMEs”, International Journal of Research in Advent Technology, PP:51-65, Vol: 2, No:4, April, 2014. (https://doi.org/10.32622/ijrat, ISSN: 2321-9637; Impact Factor: 0.765).
10. Singh. A. K, Shukla. S. S and Sanjay Kumar Jha, “Green Manufacturing Practices in Brick Industries: A Case Study Using AHP”, International Journal of Innovative Research in Science, Engineering and Technology, PP:2236-42, Vol:2, Issue:6, 2013. (https://doi.org/10.15680/IJIRSET, ISSN: 2319-8753; Impact Factor: 1.672).
11. Prakash. P, Sanjay Kumar Jha and Lal. S. P, “A Study of Process Parameters of Friction Stir Welded AA 6061 Aluminum Alloy”, International Journal of Innovative Research in Science, Engineering and Technology, PP:2304-09, Vol:2, Issue:6, 2013. (https://doi.org/10.15680/IJIRSET, ISSN: 2319-8753; Impact Factor: 1.672).
12. Prasad. K. D, Sanjay Kumar Jha and Singh. R. K, “Productivity Assessment of Utensils Manufacturing Unit: A Case Study”, International Journal of Innovative Research in Science, Engineering and Technology, PP:2360-69, Vol:2, Issue:6, 2013. (https://doi.org/10.15680/IJIRSET, ISSN: 2319-8753; Impact Factor: 1.672).
13. Prakash. A, Sanjay Kumar Jha and Mohanty. R. P, “Scenario Planning for Service Quality: A Monte Carlo simulation study”, International Journal of Strategy and Management, PP:331-352, Vol:5, Issue:3, 2012.( http://dx.doi.org/10.1108/17554251211247599; ISSN: 1755-425X; ESCI, SCOPUS; Publisher: Emerald).
14. Suman. S and Sanjay Kumar Jha, “Knowledge based decision support system in steel industries”, International Journal of Manufacturing Technology and Research, PP:16-21, Vol:8, No:1, 2012. (ISSN: 0973-0281).
15. Manoharan. P. K, Sanjay Kumar Jha and Singh. B. K, “Modeling the risk factors in ergonomic processes in Brick kilns workers using Fuzzy Logic”, International Journal of Applied Sciences and Engineering Research, PP: 92-97, Vol:1, No:1, 2012. (http://dx.doi.org/10.6088/ijaser.0020101009, ISSN: 2277-9442).
16. Suman. S, Singh. R. K, Sanjay Kumar Jha and Jha. V. K, “A Multi Objective DSS for Optimization of Ferro- Alloy Cost Using LIPSOL”, International Journal of Technical Research (IJTR), PP:26-35, Vol:1, No:1, 2012. (ISSN: 2278-5787).
17. Pathak. P, Sanjay Kumar Jha and Singh. A.P, “Tribological Approach for Improvement in Productivity and Quality of Flat Rolled Steel Products: A Review”, International Journal of Applied Science & Technology Research Excellence, PP:196-202, Vol:2, Issue: 2, 2012. (ISSN: 2250-2726).
18. Manoharan. P. K, Sanjay Kumar Jha and Singh. B. K, “Ergonomics investigation using Psycho-physiological study for Brick kilns’ In Jharkhand”, International Journal of Environmental Sciences, PP:1484-1491, Vol:2, No: 3, Jan,2012. (DOI: 10.6088/ijes.00202030033; ISSN: 0976-4402; Publisher: IPA).
19. Pathak. P, Sanjay Kumar Jha, Sengupta. P. P and Singh. A. P, “Development of Superior Quality Rolling Oils for Performance Improvement Of 5-STAND TANDEM COLD MILL”, THE ANNALS OF “DUN?REA DE JOS UNIVERSITY OF GALA?I FASCICLE VIII, TRIBOLOGY, Vol:XVII, Issue:2, PP:25-31, 2011. (ISSN: 1221-4590).
20. Jha. V. K, Sanjay Kumar Jha and Prakash. P, “Data Mining Application Using Decision Tree and ANN for Predicting Surface Roughness of End Milling Manufacturing Process”, International Journal of Computer Science Engineering and Information Technology Research, Vol:1, Issue:2, PP:61-68, 2011. (ISSN, Print:2249-6831; Impact Factor:6.87; Publisher: Transstellar).
21. Prakash. A, Sanjay Kumar Jha and Kallurkar. S. P, “Attitudes of Indian Towards service Quality for Life Insurance in India”, International Journal of Research in Computer Application and Management, Vol:1, ISSUE:9, PP:57-63, November 2011. (ISSN: 2231-1009).
22. Pathak. P, Singh. A. P, Rai. D, Roy. B and Sanjay Kumar Jha, “Tribological Approach for Improvement in Surface Quality of Hot and Cold Rolled Steel Strips”, International Journal of Manufacturing Technology & Research, Vol:5, No:1-2, PP:93-100, Jan-Jun 2009. (ISSN: 0973-0281).
23. Jha. L. M and Sanjay Kumar Jha, “Multi-Agent Based Web Manufacturing Management System in Tribal Artifact Production”, The international journal of applied management and technology, Vol:5, No:1, PP:139-158, May,2007. (ISSN: 1554-4740; Publisher: Walden University Publishing, USA).
24. Sanjay Kumar Jha and Kumar. S “Assessment of productivity of items manufactured by rural artefacts community- with special reference to Jharkhand state (India)”, The international journal of applied management and technology, Vol:4, No:2, PP:288-320, November,2006. (ISSN: 1554-4740; Publisher: Walden University Publishing, USA).

     B.RESEARCH PAPER (NATIONAL JOURNAL)

1. Rajeev Ranjan & Sanjay Kumar Jha, “Low Frequency Vibration Assisted Welding: A Review of Recent Developments” Journal of Experimental & Applied Mechanics, Volume:13, Issue:03, PP:1-17, April,2023. (ISSN: 2230-9845; Publisher: STM).
2. Pandey. S., Sanjay Kumar Jha, Kumar. P, and Bharat. A. K, “Analysis of Defects for Aluminium Copper Bimetal Fabricated by Centrifugal Casting” ELK Asia Pacific Journals, Special Issue, PP:1-6, April,2016. (ISBN: 978-93-85537-06-6; Publisher: ELK).
3. Mohd. Hassan, Sanjay Kumar Jha, & Pandey. P, “Submerged Arc Welding: A Review Paper” ELK Asia Pacific Journals, Special Issue, PP:232-236, April,2016.  (ISBN: 978-81-930411-4-7; Publisher: ELK).
4. Mohd. Hassan, Sanjay Kumar Jha, & Pandey. P, “Analysis and Optimization of Parameters in Submerged Arc Welding Process using Taguchi Methods and Regression Analysis” ELK Asia Pacific Journals, Special Issue, PP:173-177, April,2016. (ISBN: 978-81-930411-4-7; Publisher: ELK).
5. Singh. A. K, Sanjay Kumar Jha, Prakash. A, and Aggarwal. H, “Life Cycle Assessment of Polyethylene Terepthalate (PET) Bottles” ELK Asia Pacific Journals, Special Issue, PP:122-128, April,2016 (ISBN: 978-81-930411-4-7; Publisher: ELK).
6. Singh. A. K, Sanjay Kumar Jha, Prakash. A, and Sukla. S. S, “A Decision-Making Model for Green Manufacturing using Analytical Hierarchy Process and Grey Relation Grading” ELK Asia Pacific Journals, Special Issue, PP:113-116, April,2016 (ISBN: 978-81-930411-4-7; Publisher: ELK).
7. Prakash. P, Lal. S. P, and Sanjay Kumar Jha, “Numerical Investigation of the Plunge Stage in Friction Stir Welding Using Various Tool Pin Profiles” , ELK Asia Pacific Journals, Special Issue, PP: 168-172, April, 2016 (ISBN: 978-81-930411-4-7; Publisher: ELK).
8. Mohd. Hassan, Sanjay Kumar Jha, & Pandey. P, “Metal Foam by Powder Metallurgy Route: A Review Paper”, Journal of Production Research and Management, PP:9-15, Vol:6, Issue:1, February, 2016. (ISSN: 2249-4766; Publisher: STM).
9. Prasad. K, Sanjay Kumar Jha & Lal. S. P, “Understanding Quality in Home Based Brassware Manufacturing Units in India”, ELK Asia Pacific Journals, Special Issue, PP: 479-483,  April, 2015. (ISBN: 9788193041147, Publisher: ELK).
10. Singh. A, Sanjay Kumar Jha & Prakash. A, “Imperatives of Green Manufacturing”, ELK Asia Pacific Journals, Special Issue, PP:472-478, April,2015. (ISBN: 9788193041147, Publisher: ELK).
11. Prakash. P, Sanjay Kumar Jha & Lal S. P, “Emerging Modeling and Simulation Techniques for Friction Stir Welding - A Review”, ELK Asia Pacific Journals, Special Issue, PP:288-295, April,2015. (ISBN: 9788193041147, Publisher: ELK).
12. Sanjay Kumar Jha, Singh. A. K and Prakash. A, “Understanding Green Manufacturing (GM)”, Journal of Production Research and Management, PP:33-45, Vol:4, Issue:1, May,2014. (ISSN: 2249-4766; Publisher: STM).
13. Pathak. P, Sanjay Kumar Jha, Sengupta. P. P and Singh. A. P, “Investigations into High speed Rolling of Thin Gauge Strips for Improving their Rolling Rate at 5-STAND TANDEM COLD MILL”, Journal of STEEL INDIA, PP:181-188, Vol:34, No:2, September,2011. (ISSN: 0970-1311).
14. Sanjay Kumar Jha, Singh. S and Kumar. S, “Investigations into heterogeneous deformation of sintered preform due to Die – work piece interfacial friction”, Indian Journal of Tribology, Tribology society of India, Vol:3, No:1, PP:7-13, Jan-June 2008.
15. Sanjay Kumar Jha and Kumar. S, "A cost effective approach for improving productivity of rural artefacts manufacturing-with special reference to Jharkhand state,” Journal of CMTI-Manufacturing Technology Today, Bangalore. (ISSN: 0972-7396).
16. Sanjay Kumar Jha, “Effect of musculoskeletal discomforts on productivity of rural artefacts manufacturing industries workers in Jharkhand”, Journal of Current Sciences, Vol: 5, No: 2, PP: 495–500, 2004. (ISSN: 0972-6101).
17. Sanjay Kumar Jha and Jha. A. K, “Manufacturing metal artefacts by Dokra casting: a treatise with techno – economic aspects with respect to Jharkhand state”, Journal of Current Sciences, Vol:5, No:1, PP:127–132, 2004. (ISSN: 0972-6101).
18. Pandey. V, Sanjay Kumar Jha and Ranjan. R, "A case study of value engineering in Bicycle design,” Journal of VE for the Indian Value engineering Society - INVAVE, Vol. 12, No. 1&2, PP:9-17, April–September,2003.
19. Ranjan. R, Sanjay Kumar Jha and Singh. S, "Frictional Conditions during sinter forming,” Journal of CMTI- Manufacturing Technology Today, Vol.2, Issue–10, PP:12-16, October, 2003. (ISSN: 0972-7396)

     C.RESEARCH PAPERS (NATIONAL CONFERENCES/ WORKSHOPS/ SEMINARS)

1. Sanjay Kumar Jha, Kumar. S and Varma. A, “VAT analysis an effective tool for modeling factory automation”, Proceeding of All India Seminar on Design of Production Systems- New concepts, Bhubaneswar, PP:57–60,26th July,1998.
2. Sanjay Kumar Jha, and Kumar. S, “Robotics and Manufacturing Automation”, Proceeding of National conference on manufacturing challenges in 21st century, BHU Varanasi, PP-SII B3.1- SII B3.12, January 8th–9th, 2000.
3. Sanjay Kumar Jha, and Kumar. S, “A cost effective approach for improving productivity of rural artifacts manufacturing-with special reference to Jharkhand state”, Proceeding Of 18th AIMTDR conference on IT based manufacturing, BIT Mesra, Ranchi, PP:781-786,2002.
4. Sanjay Kumar Jha, and Kumar. S, “Mechatronics Integration & Complexity Involved in CAD / CAM workstation”, Proceeding Of 18th National convention of mechanical engineers on Emerging trends in Mechatronics for automation, Rourkela, PP:202-209, 9th-10th November, 2002.
5. Sanjay Kumar Jha, “Role & Application of mechatronics in CAD / CAM workstation design”, All India workshop on- Application of Mechatronics in Indian scenario, Ranchi, 28th-29th September, 2002.
6. Sanjay Kumar Jha, Kumar. S and Agarwal. M, “Application of Value engineering on Aluminium artifacts manufacturing”, CD Proceeding of XIIIth INVEST national conference on Global competitiveness through value engg., Mumbai,23rd November, 2002.
7. Ranjan. R, Sanjay Kumar Jha, Singh. S and Singh R.K, “Value analysis from the prospective of competitive advantage and its application to industry: A case study of motherboard” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence, B.I.T Mesra, Ranchi, 26th-27th July, 2003.
8. Ranjan. R and Sanjay Kumar Jha, “Value engineering and its application in industry: A case study of Ceiling fan” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence, B.I.T Mesra, Ranchi, 26th-27th July, 2003.
9. Srivastava S.C,Sanjay Kumar Jha and Ranjan. R, “Application of value engineering in hotel management” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence, B.I.T Mesra, Ranchi, 26th-27th July, 2003.
10. Ranjan R.K, Sanjay Kumar Jha and Kumar. S, “P/M Products: The winning challenges” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence, B.I.T Mesra, Ranchi, 26th-27th July, 2003.
11. Ranjan. R, Sanjay Kumar JhaSingh. S, Kumar. A and Singh P.K, “Value Engineering and its application in educational Institution: A case study of Time analysis” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence, B.I.T Mesra, Ranchi, 26th-27th July, 2003.
12. Ranjan. R, Sanjay Kumar Jha, Singh. S, Sinha. A and Kumar S.B, “Powder Metallurgy forging finds a better space among conventional manufacturing techniques: A value facturing approach” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence, B.I.T Mesra, Ranchi, 26th-27th July, 2003.
13. Pandey. V, Sanjay Kumar Jha and Ranjan. R, “A case study of value engineering in bicycle design” E-Proceeding of National conference Value engineering – A fast track to profit improvement and business excellence, B.I.T Mesra, Ranchi, 26th-27th July, 2003.
14. Agarwal. M and Sanjay Kumar Jha, “Metal Forming Tribology: Research Potential” e-Proceeding of World Workshop on Foundry, Forge & Forming, National Institute of Foundry and Forge Technology, Ranchi, 17th-18th August, 2005.
15. Sanjay Kumar Jha and Kumar. S, “Stress, Health and productivity: case study of artefacts manufacturing units of Jharkhand” Proceeding of National Seminar on Focus Human Resource, College of Agribusiness Management, Pantnagar, 8th-9th April, 2006.
16. Sanjay Kumar Jha and Kumar. S, “Dokra Brass Artefacts from Jharkhand: Glorious past and uncertain future” Proceeding of National Seminar on Bharatiya Heritage in Engineering and Technology, Indian Institute of Science, Bangalore, 11th-13th May, 2006.
17. Pathak. P, Sanjay Kumar Jha, Singh. A. P, and Rai. D, “Improvement in rolling rate of thin gauge steel strips at a tandem cold mill” CD Proceeding of 3rd National workshop on Precision Forming: Modeling, analysis and system development, B.I.T Mesra, Ranchi, 15th -16th February, 2010.
18. Sanjay Kumar Jha and Suman. S, “Knowledge Based Decision Support System in Steel Industries” Proceeding of National Conference on Competitive Manufacturing: Strategies & Decision Support Systems, GLA University, Mathura, PP:369-380, 5th-6th November, 2011.
19. Singh. A. K, Acharya. D.S and Sanjay Kumar Jha, “A Generalized Model of Green Manufacturing for Manufacturing Process using Fuzzy Logic” e-Proceeding of 27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing - Vision 2020, B.I.T Mesra, Ranchi, 25th-26th May, 2012.
20. Suman. S, Singh. R. K and Sanjay Kumar Jha, “A Multi-Objective Decision Support System for Optimization of Ferro-Alloy Cost During Steel Making” e-Proceeding of 27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing-Vision 2020, B.I.T Mesra, Ranchi, 25th-26th May, 2012.
21. Manoharan. P.K., Sanjay Kumar Jha and Singh. B. K, “Analysis of load and gradient effect on hand force responses during brick carrying in a Brick kiln” e-Proceeding of 27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing-Vision 2020, B.I.T Mesra, Ranchi, 25th-26th May, 2012.
22. Singh. A.K and Sanjay Kumar Jha, “Exploring Possibilities of Green Manufacturing: Positioning and Orientation Using Fuzzy Logic” e-Proceeding of 27th National Convention of Production Engineers & National Seminar on Advancements in Manufacturing - Vision 2020, B.I.T Mesra, Ranchi, 25th-26th May, 2012.
23. Singh. A.K and Sanjay Kumar Jha, “Sustainability assessment using Analytical Hierarchy Process: A case study” e-Proceeding of All India Seminar on Technology Solution in Manufacturing, B.I.T Mesra, Ranchi, 01st-02nd March, 2013.
24. Baug. T.K, Pattanaik. L. N & Sanjay Kumar Jha, “Selection of lean tools for achieving sustainability in manufacturing”, e-Proceeding of All India Seminar on Technology Solution in Manufacturing, B.I.T Mesra, Ranchi, 01st-02nd March, 2013.
25. Kumar. P, Sanjay Kumar Jhaand Srivastava. S.C, “Design, development and analysis of the friction stir welding process”, e-Proceeding of All India Seminar on Technology Solution in Manufacturing, B.I.T Mesra, Ranchi, 01st-02nd March, 2013.
26. Singh. A.K. and Sanjay Kumar Jha, “Perspectives on Green Manufacturing” e-Proceeding of All India Seminar on Recent Advancement in Manufacturing and its Management, B.I.T Sindri, Dhanbad, 07th-08th February, 2014.

    D.RESEARCH PAPER (INTERNATIONAL CONFERENCES/SEMINARS)

   PAPER PRESENTED:

1. Sanjay Kumar Jha, Kumar. S and Jha A. K, “Value engineering an effective tool for improving productivity of rural artifacts manufacturing-with special reference to Jharkhand state”, Proceeding of International conference on manufacturing, Dhaka (Bangladesh), Vol.2, PP:491-497, 2002.
2. Singh. A, Sanjay Kumar Jha & Prakash. A, “Imperatives of Green Manufacturing”, Ist International Conference on Advancements & Recent Innovations in Mechanical, Production & Industrial Engineering (ARIMPIE-2015), ITS Engineering College, Greater Noida, 10th-11th April, 2015.
3. Prasad. K, Sanjay Kumar Jha & Lal. S. P, “Understanding Quality in Home Based Brassware Manufacturing Units in India”, Ist International Conference on Advancements & Recent Innovations in Mechanical, Production & Industrial Engineering (ARIMPIE-2015), ITS Engineering College, Greater Noida, 10th-11th April, 2015.
4. Prakash. P, Sanjay Kumar Jha & Lal S. P, “Emerging Modeling and Simulation Techniques for Friction Stir Welding - A Review”, Ist International Conference on Advancements & Recent Innovations in Mechanical, Production & Industrial Engineering (ARIMPIE-2015), ITS Engineering College, Greater Noida, 10th-11th April, 2015.
5. Mohd. Hassan, Sanjay Kumar Jha, & Pandey. P, “Analysis and Optimization of Parameters in Submerged Arc Welding Process using Taguchi Methods and Regression Analysis”, Second International Conference on Advancements & Recent Innovations in Mechanical, Production & Industrial Engineering (ARIMPIE-2016), ITS Engineering College, Greater Noida, 15th-16th April, 2016.
6. Singh. A. K, Sanjay Kumar Jha, Prakash. A, and Aggarwal. H, “Life Cycle Assessment of Polyethylene Terepthalate (PET) Bottles”, Second International Conference on Advancements & Recent Innovations in Mechanical, Production & Industrial Engineering (ARIMPIE-2016), ITS Engineering College, Greater Noida, 15th-16th April, 2016.
7. Singh. A. K, Sanjay Kumar Jha, Prakash. A, and Sukla. S. S, “A Decision-Making Model for Green Manufacturing using Analytical Hierarchy Process and Grey Relation Grading”, Second International Conference on Advancements & Recent Innovations in Mechanical, Production & Industrial Engineering (ARIMPIE-2016), ITS Engineering College, Greater Noida, 15th -16th April, 2016.
8. Mohd. Hassan, Sanjay Kumar Jha, & Pandey. P, “Submerged Arc Welding: A Review Paper”, Second International Conference on Advancements & Recent Innovations in Mechanical, Production & Industrial Engineering (ARIMPIE-2016), ITS Engineering College, Greater Noida, 15th-16th April, 2016.
9. Prakash. P, Lal. S. P, and Sanjay Kumar Jha, “Numerical Investigation of the Plunge Stage in Friction Stir Welding Using Various Tool Pin Profiles”, Second International Conference on Advancements & Recent Innovations in Mechanical, Production & Industrial Engineering (ARIMPIE-2016), ITS Engineering College, Greater Noida, 15th-16th April, 2016.

   PAPER PUBLISHED:

1. Pathak. P, Sanjay Kumar Jha, Singh. A. P, and Mondal. N, “Genesis of surface blemishes on cold rolled strips” Proceeding of 5th International conference on Iron & Steel Making, Visakhapatnam, 6th-7th August, 2010.
2. Pathak. P, Sanjay Kumar Jha, Singh. A. P, and Rai. D, “Study on effect of roll bite lubrication on rolling parameters of hot strip mill” poster presentation on 7th International conference on Industrial Tribology, SAIL, Ranchi, 2nd-4th December, 2010.
3. Prakash. P, Sanjay Kumar Jha & Lal S. P, “Investigations of friction stir welding of metallic materials”, e-Proceeding of International conclave on Innovation in Engineering and Management, BIT Mesra, Patna Centre, 22nd-23rd February, 2013.
4. Singh. A.K, Shukla. S, and Sanjay Kumar Jha, “Comparative Study of Green Manufacturing Process in Brick Industries using AHP and Decision Tree” Proceeding of 1st International conference on Mechanical Engineering emerging Trends for Sustainability, MNIT, Bhopal, PP:701-709, 29th-31st January, 2014.
5. Sanjay Kumar Jha and Pandey. S, “A Review on Aluminium Metal Matrix Composite Fabricated through Centrifugal Casting” Proceeding of International Conference on Evolutions in Manufacturing: Technologies and Business Strategies for Global Competitiveness, Organized by Institution of Engineers (India), Jharkhand State Centre in association with Department of Production Engineering, BIT Mesra, Ranchi, PP:107-113, 12th-13th November, 2016. (ISBN: 978-93-86256-11-9).
6. Malhotra. A & Sanjay Kumar Jha, “Forecasting Techniques for Intermittent Demands using a Case Study of a Company” Proceeding of International Conference on Evolutions in Manufacturing: Technologies and Business Strategies for Global Competitiveness, Organized by Institution of Engineers (India), Jharkhand State Centre in association with Department of Production Engineering, BIT Mesra, Ranchi, PP:299-304, 12th-13th November, 2016. (ISBN: 978-93-86256-11-9).
7. Pandey. S & Sanjay Kumar Jha “Casting Defects and its Optimization Method in Centrifugal Casting Process: A Review” Proceeding of International Conference on Advances in Materials and Manufacturing (ICAMM ‘17), Organized by National Institute of Foundry and Forge Technology, Hatia, Ranchi, PP:72-76, 19th-21st January, 2017. (ISBN: 978-93-86256-36-2).
8. Prakash. P, Sanjay Kumar Jha and Lal. S. P, “Numerical Analysis Of Tool Pin Profile Effect On Heat Generation In Friction Stir Welding Process” Proceeding of 2nd International ISHMT-ASTFE Heat and Mass Transfer Conference (IHMTC-2017), Organized by BITS Pilani, Hyderabad, India, PP- 2371-2377, 27th-30th December, 2017. (ISBN: 978-1-56700-478-6 Online; DOI: 10.1615/IHMTC-2017.3310).
9. Dewangan, P. kumar and Sanjay Kumar Jha, “Optimization of Quality and Productivity of Wire EDM by using L9 Orthogonal Array” 1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018), Amity University, Noida, Uttar Pradesh, 3rd-5th October, 2018.
10. Deepak kumar, Ananya Chattree, Sanjay Kumar Jha N. K. Singh, A. Mandal, “Deformation Behavior of Semi-solid forged A356-5TiB2 Nano in-situ Composites”, 1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018), Amity University, Noida, Uttar Pradesh, 3rd-5th October, 2018.
11. Vivek Prabhakar and Sanjay Kumar Jha, “Analysis of Green Supply Chain Management Enablers in FMCG Sector Using Integrated ISM and MICMAC Approach” 1st International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2018), Amity University, Noida, Uttar Pradesh, 3rd-5th October, 2018.
12. Deepak kumar, Shailesh Dewangan, S. K. Parida, Sanjay Kumar Jha, “Optimization of EDM process parameters of Thixoformed A356-5TiB2 in-situ composites”, International Conference on Processing and characterization of Materials (ICPCM-2018), NIT Rourkela, 6th-8th December, 2018.
13. Prashant Prakash, Anand. R. S, & Sanjay Kumar Jha, “Effect of Weld Zone Shape on Microstructure and Tensile Properties in Friction Stir Welding Process”, International Conference on Processing and characterization of Materials (ICPCM-2018), NIT Rourkela, 6th-8th December, 2018.
14. Shailesh Dewangan, Sanjay Kumar Jha & S. Deepak Kumar, “Analysis of discharge characteristics during EDM process”, International Conference on Innovative Product Design and Intelligent Manufacturing Systems (ICIPDIMS 2019), NIT Rourkela, 17th-18th May,2019.
15. Sonu Rajak,Vivek Prabhakar & Sanjay Kumar Jha, “Application of VIKOR for the selection of material for the green and sustainable construction”, International Conference on Innovative Product Design and Intelligent Manufacturing Systems(ICIPDIMS 2019), NIT Rourkela, 17th-18th May, 2019.
16. Prashant Prakash, Ravi Shankar Anand, Sanjay Kumar Jha and Abhishek Kumar Singh,”Investigations of Effect of Process Parameters on Material Flow in Friction Stir Welding using CFD” 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), NIT Rourkela, 12th-14th December, 2019.
17. Prakash Kumar, Shailesh Dewangan and Sanjay Kumar Jha,” Analysis of surface integrity and dimensional accuracy in EDM” 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), NIT Rourkela, 12th-14th December, 2019.
18. Shailesh Dewangan, S. Deepak Kumar and Sanjay Kumar Jha,” Optimization of Micro-EDM drilling parameters of Ti-6Al-4V alloy” 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), NIT Rourkela, 12th-14th December, 2019.
19. Deepak Kumar, Shailesh Dewangan, Sanjay Kumar Jha, A. Manda,” Optimization of Dry Sliding Wear parameters of Thixoformed A356-5TiB2 in-situ composites using RSM” 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), NIT Rourkela, 12th-14th December, 2019.
20. Ravi Shankar Anand, Prashant Prakash, Sanjay Kumar Jha and Abhishek Kumar Singh,” Numerical Investigations of Effect of Input Process Parameters on Heat Generation in Friction Stir Welding” 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), NIT Rourkela, 12th-14th December, 2019.
21. Vivek Prabhakar, Sonu Rajak, Ankit Sagar and Sanjay Kumar Jha,” Leanness Index Measurement using Hybrid AHP-Fuzzy and ISM approach in MSMEs” 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), NIT Rourkela, 12th-14th December, 2019.

• Fellow, Society for Sciences.
• Life member, Tribology Society of India.
• Life member, Indian Value Engineering Society.
• Member, Institute of Indian Foundrymen.
• Member, Indian Institution of Production Engineers.
• Member, Indian Society for Technical Education.
• Member, Institution of engineers (I).
• Chartered Engineer.

BOOK:

1. S. Kumar, R. K. Singh and Sanjay Kumar Jha, “Value engineering”, 2005. (Publisher: Narosa Pub. House Pvt. Ltd.,New Delhi; ISBN: 81-7319-578-1)
2. Sanjay Kumar Jha, “Productivity Enhancement of Rural Artefacts Manufacturing”, 2011. (Publisher: LAP LAMBERT Academic Publishing, Germany; ISBN: 978-3-8465-0913-5)
3. S Suman and Sanjay Kumar Jha, “Knowledge Based Decision Support System for Steel Industries”, 2013. (Publisher: LAP LAMBERT Academic Publishing, Germany; ISBN: 978-3-659-30548-1)
4. Anand Prakash and Sanjay Kumar Jha, “Design and development of service quality model- An applied orientation in life insurance business”, 2013. (Publisher: LAP LAMBERT Academic Publishing, Germany; ISBN:978-3-659-47819-2)
5. Abhishek Singh, Anand Prakash and Sanjay Kumar Jha, “Practices of Green Manufacturing in selected Indian Industries”, 2016. (Publisher: LAP LAMBERT Academic Publishing, Germany; ISBN:978-3-659-89805-1)

BOOK CHAPTER:

1. Sanjay Kumar Jha, “Manufacturing metal artefacts by Dokra casting”, Industrial Pollution and management, PP:247–256, 2004.(ISBN: 81-7648-774-0 ; Publisher: APH Publishing Corporation.)
2. Sanjay Kumar Jha, “Value Analysis/ Value Engineering: Worksheets”, Industrial Pollution and management, PP:212–232, 2008. (ISBN: 9788110037680; Publisher: Dhanpat Rai & Co.)
3. Manoharan. P. K, Sanjay Kumar Jha and Singh. B. K, “Modeling the risk factors in ergonomic processes using fuzzy logic”, Lecture Notes in Electrical Engineering Computer, Informatics, Cybernetics and Applications, PP : 827-832, Volume:107, Part:I, 2012. (doi:10.1007/978-94-007-1839-5-89; ISBN: 978-94-007-1839-5 ; Scopus; Publisher: Springer.)
4. S. Deepak Kumar, Sanjay Kumar Jha, D. Karthik & S. K. Parida, “Optimization of Semi-solid-Forging Parameters of A356–5TiB In Situ Composites Using ANSYS and DEFORM Simulation”, Innovations in Soft Computing and Information Technology, PP : 827-832, Volume:03,  2019. (doi.org/10.1007/978-981-13-3185-5_24; ISBN: 978-981-13-3185-5 ; Scopus; Publisher: Springer.)
5. Sahini Deepak Kumar, Ananya Chatttee, Sanjay Kumar Jha, Niranjan Kumar Singh and Animesh Mandal, “Deformation Behavior of Semi-solid Forged A356–5TiB Nano-In Situ Composites”, Lecture Notes in Mechanical Engineering -Advances in Industrial and Production Engineering, PP : 77-84,  2019. (doi.org/10.1007/978-981-13-6412-9_7; ISBN: 978-981-13-6412-9 ; Scopus; Publisher: Springer Nature)
6. Prabhakar Vivek and  Sanjay Kumar Jha, “Analysis of Green Supply Chain Management Enablers in FMCG Sector Using Integrated ISM and MICMAC Approach”, Lecture Notes in Mechanical Engineering - Advances in Industrial and Production Engineering, PP : 69-75,  2019. (doi.org/10.1007/978-981-13-6412-9_6; ISBN: 978-981-13-6412-9 ; Scopus; Publisher: Springer Nature)
7. Shailesh Kumar Dewangan, Prakash Kumar and Sanjay Kumar Jha, “Optimization of Quality and Productivity of Wire EDM by Using L9 Orthogonal Array”, Lecture Notes in Mechanical Engineering - Advances in Industrial and Production Engineering, PP : 93-100,  2019. (doi.org/10.1007/978-981-13-6412-9_9; ISBN: 978-981-13-6412-9 ; Scopus; Publisher: Springer Nature)
8. Shailesh Kumar Dewangan, Sanjay Kumar Jha and S. Deepak Kumar, “Analysis of Discharge Characteristics During EDM Process”, Lecture Notes in Mechanical Engineering - Innovative Product Design and Intelligent Manufacturing Systems., PP : 521-527,  2020. (doi.org/10.1007/978-981-15-2696-1_51 ; ISBN: 978-981-15-2696-1; Scopus; Publisher: Springer Nature)
9. S.Rajak, P. Vivek and Sanjay Kumar Jha, “Application of VIKOR for the Selection of Material for the Green and Sustainable Construction”, Lecture Notes in Mechanical Engineering - Innovative Product Design and Intelligent Manufacturing Systems., PP : 777-785,  2020. (doi.org/10.1007/978-981-15-2696-1_75 ; ISBN: 978-981-15-2696-1; Scopus; Publisher: Springer Nature)
10. Deepak Sahini,J. Ghose, Sanjay Kumar Jha, A. Behara and A. Mandal, “Optimization and Simulation of Additive Manufacturing Processes: Challenges and Opportunities – A Review”, Additive Manufacturing Applications for Metals and Composites - Advances in Civil and Industrial Engineering, PP : 187-209,  2020. (doi.org/10.4018/978-1-7998-4054-1.ch010 ; ISBN: 9781799840541; Scopus; Publisher: IGI Global)
11. Purnanand Pathak, Ghanshyam Das and Sanjay Kumar Jha, “Influence of RollWear in Hot Rolling of Steel at Hot Strip Mills”, Lecture Notes in Mechanical Engineering - Recent Advances in Manufacturing Processes., PP : 153-170,  2021. (doi.org/10.1007/978-981-16-3686-8 ; ISBN: 978-981-16-3685-1 ; Scopus; Publisher: Springer)
12. Deepak Kumar, S. Dewangan, Sanjay Kumar Jha, S. K. Pareda and Ajit Behara, “3D and 4D Printing in Industry 4.0: Trends, Challenges, and Opportunities”, Next Generation Materials and Processing Technologies, PP : 579-587,  2021. (doi.org/10.1007/978-981-15-2696-1_75 ; ISBN: 978-981-15-2696-1; Scopus; Publisher: Springer Nature)
13. Shatrudhan Pandey,  Kirtika Kiran,  Shreyanshu Parhi,  Abhishek Kumar Singh  & Sanjay Kumar Jha, “Safety Management in the Era of Emerging Industrial Revolution: The Conceptualisation of Safety 4.0”, Fostering Sustainable Development in the Age of Technologies, PP : 579-587,  December, 2023. (doi.org/10.1108/978-1-83753-060-120231017; ISBN: 978-1-83753-061-8; Scopus; Publisher: Emerald)

LISTED IN THE EDITORIAL BOARD / PANEL OF REVIEWERS OF NATIONAL/INTERNATIONAL JOURNALS.

1. International Journal of Innovative Research in Science, Engineering and Technology.
2. International Journal of Education and Development using Information and communication technology.
3. International Journal of Technical Research (IJTR).
4. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD).
5. Journal of Production Research and Management.
6. International Journal of Productivity and Quality Management (Inderscience Publisher)