Birla Institute of Technology, Mesra
Faculty Image

Dr. Kaushik Kumar

Joined Institute on : 19-Sep-2001

  • Professor
  • Mechanical Engineering
  • Ph.D.
Contact Address

QTR No. DI/26, BIT Campus, Birla Institute of Technology, Mesra, Ranchi - 835215

Flat No. 104; "Nirmala Apartment"; 2, Rajendra Avenue; 1st Lane, P.O. Uttarpara, Dist. Hooghly, West Bengal, Pin: 712258

  • Phone Office - 06512275444
  • Phone Residence - 9431597463
  • Email - kkumar@bitmesra.ac.in
Work Experience

Teaching : 24 Years

Research : 16 Years

Individual: 11 Years
Research Areas

Virtual Manufacturing, Non Conventional Machining, CAD CAM, Rapid Prototyping, Composites, Functionally Graded Materials, Optimization, Quality Management System

DOCTORAL

AWARDED

  1. Study of Tribological Properties of Some Thermoplastic Composites (2014) – Jayapalan Sudeepan
  2. Study of Surface Roughness and Material Removal Rate in Non- Conventional Machining of EN31 Steel (2015) – Milan Kumar Das
  3. Study of Tribological Properties and Thermal Degradation Kinetics of Natural Fibre Reinforced Polymeric Composites (2024) – Chikesh Ranjan

ONGOING

  1. Design, Development & Performance Analysis of a Solar Box Cooker With Thermal Energy Storage – Birendra Kishore
  2. Role of Hybrid Nano Fillers on the Physio – Mechanical and Tribological Behaviour of Polymer Nano Composites – Jeenendra Kumar Shiv
  3. Organic Matrix Based Ablative Composites – Development, Analysis and Optimization – Amit Kumar

MASTERS’

AWARDED

  1. Development of ISO 17025: 2005 Quality System for an Air Borne Target Test Range Establishment (2012) – Sanjeev Kumar
  2. Optimization Of Machine Process Parameters In EDM For EN41 Material Using Taguchi (2014) – Vikas
  3. Optimization of Machine Process Parameters in EDM for EN19 Material using Response Surface Methodology (2014) – Shashikant
  4. Design Analysis Of A Mixed Flow Pump Impeller Using Ansys And Its Validation Using Artificial Neural Network (2014) - Sambhrant Srivastava
  5. Analysis Of Different Beams Using ANSYS And Its Validation Using Artifical Neural Network (2014) - Gargi Majumder
  6. Study of Mechanical and Wear Resistance properties of Silica Gel Reinforced Aluminium Composite (2015) – Anuj Dixit
  7. Optimization of Machine Process Parameters in Electro Chemical Machining for EN 19 Material using Taguchi Method (2015) – Abhishek Tiwari
  8. Optimization of Machining Characteristics in Die Sinking Electrode Process Parameters in Electro Discharge Machine for EN 45 Tool Steel (2015) – Sumit Raj
  9. Study of Mechanical and Tribological Properties for Keoline Reinforced Epoxy Composite (2015) – Arnab Prakash
  10. Design and Optimization of Mixed Flow Pump Impeller Using ANSYS (2015) – Santosh Shukla
  11. Design Modification for Performance Enhancement of Base Valve Assembly in Twin Tube Shock Absorber (2016) – Dheeman Bhuyan
  12. Design and Multi-body Dynamic Analysis of Opposed Piston Engine (2016) – Sunil Sataba Hebbalkar.
  13. Design and Weight Optimization of Front Axle for Heavy Vehicle (2016) – Rajendra Mahto
  14. Stress, Buckling And Fatigue Analysis, And Shape Optimization Of Connecting Rod Using Different Materials (2016) – Prakash Shanker Kumar
  15. Quality management System for Software Organization (2016) – Monika
  16. Design of Mixed Flow pump Impeller Blade using Mean Streamline Method and its Analysis (2016) - Divya Zindani
  17. Design and Analysis of Powered Ankle Foot Prosthesis Mechanism (2017) – Sanghamitra Debta
  18. Application od Composite Material for Othotic Callipers (2017) – Nisha Kumari
  19. Design and Optimization of Mixed flow Pump Impeller Blades (2017) – Nehal Dash
  20. Optimization Of Machine Process Parameters In EDM For EN 31 Using Evolutionary Optimization Techniques (2018) – Nadeem Faisal
  21. Numerical Investigation of Heat Transfer around Rotating Circular Cylinder (2018) – Sumit Chandra
  22. CFD Simulation of Film Cooling Effectiveness over Turbine blade using Slot Injection (2018) – Kunal
  23. Generating a Machining Program Employing Slip Line Field Model using MATLAB (2019) – Hridayjit Kalita
  24. Path Planning of a Two Link Robotic Manipulator Using Local and Global Optimization Techniques (2021) – Ranjan Kumar
  25. Numerical Investigation on Heat Conduction / Diffusion in Isotropic and Orthotropic Materials (2022) – Ashutosh Ranjan
Award and Honours

AWARDS AND HONOURS

AWARDS

  1. Distinguished Alumnus Award for Professional Excellence 2023 under Academic and Research by the Board of Governors and the Management of National Institute of Technology, Warangal.
  2. Best Research Paper Award at ICARAE2021 for Paper titled “Numerical Analysis of Heat Conduction Through an Orthotropic Material Employing Python"
  3. Best Paper Presentation Award at ICARAE2021 for Paper titled “Comparative Study on Controllable Electro-Magneto Rheological Fluids – A brief Review”
  4. Best Paper Award at ICMMSE 2019 for Paper titled “Forced Convection Heat Transfer in a Twin Cylinder System under Static Condition using Computational Approach”
  5. Best Paper Award at ICIPDIMS 2019 for Paper titled “Generation of slip line fields incorporating BUE and shear zone to model machining using MATLAB”
  6. Innovative Researcher Award 2018 by RULA International Awards, Malaysia
  7. Award for Research Excellence by The Indus Foundation Inc., New Jersey, USA
  8. Indo Global Education Excellence Award 2017 in the field of Technical Education by Indo Global Chamber of Commerce, Industries and Agriculture; International Benevolent Research Foundation and Confederation of Indian Universities, New Delhi.
  9. Distinguished Faculty (Quality Management) Award by the VIF Board of Trustees, in recognition of Role, Outstanding Contributions, Significant Achievements and Sustained Excellence in the field of Quality Management.
  10. Certificate of Recognition from Engineering Innovative Solutions, 1044 SW Pigeon Plum Way Palm City Florida USA In recognition for willingness to lead multiple projects at the Birla Institute of Technology and for ability to achieve results.
  11. Best Paper Award at ICEMS 2013 for Paper titled “Comparison of design validation of a mixed flow pump impeller blade using CATIA and ANSYS”.

PROFESSIONAL MEMBERSHIP

  1. Life Member of Indian Carbon Society, New Delhi (LM – 617)
  2. Fellow of Institute of Engineers (I), Kolkata (F – 1310883)

EXAMINER

Doctoral Dissertation

  1. Department of Mechanical Engg. Jadavpur University, Kolkata.
  2. Department of Mechanical Engg. Prist University, Thanjavur.
  3. Department of Mechanical Engg. National Institute of Technology, Silchar.
  4. Department of Mechanical Engg. National Institute of Technology, Rourkela.
  5. Department of Mechanical Engg. KIIT, Bhubaneshwar.
  6. Department of Mechanical Engg. WPU-MIT, Pune
  7. Department of Mechanical Engg. Savitribai Phule Pune University, Pune

Master’s Thesis

  1. Department of Mechanical Engg. Jadavpur University, Kolkata.
  2. Department of Mechanical Engg. National Institute of Technology, Silchar.
  3. Department of Mechanical Engg. National Institute of Technology, Rourkela.
  4. Department of Industrial Design, National Institute of Technology, Rourkela.
  5. Department of Mechanical Engg. WPU-MIT, Pune
  6. Department of Mechanical Engg. Vivekananda University, Kolkata

RESEARCH RECOGNITION COMMITTEE

  1. School of Mechanical Engineering, WPU–MIT, Pune, INDIA.

MEMBER BOARD OF STUDIES

  1. School of Mechanical Engineering, WPU–MIT, Pune, INDIA.

CONVENER

  1. 9th International Conference on Materials Processing and Characterization - 2019 (ICMPC'19), 8th – 15th March – 2019, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad-500090 Telangana, INDIA.

ORGANIZING SECRETARY

  1. 10th International Conference on Materials Processing and Characterization - 2020 (ICMPC'20), 21st – 23rd February – 2020, GLA University, Mathura, UP, INDIA.

KEYNOTE SPEAKER

  1. Keynote Lecture during 3rd International Conference on Multifunctional Materials (ICMM-22), December 19th – 21st, 2024, Geethanjali College of Engineering and Technology, Hyderabad, INDIA
  2. Keynote Lecture during 1st International Conference on Applied Artificial Intelligence and Machine Learning (ICAAIML-2024), August 30th–31st, 2024, Vignan institute of Technology and Science, Hyderabad, INDIA
  3. Keynote Lecture during 6th International Conference on Manufacturing, Material Science and Engineering–2024 (ICMMSE '24), 16th–17th, August 2024, Vignan institute of Technology and Science, Hyderabad, INDIA
  4. Keynote Lecture during All India Seminar on ‘Emerging Trends in Digital Manufacturing using 3D Printing and Flexible Manufacturing Systems’, 10th–11th August, 2024, Institute of Engineers, Jharkhand State Chapter, Ranchi, INDIA
  5. Keynote Lecture during 1st International Conference on Computational Technique and Smart Manufacturing–2024 (ICCTSM'24), 21st–22nd, June 2024, VEMU Institute of Technology, Tirupati, INDIA
  6. Keynote Lecture during 16th International Conference on Materials Processing and Characterization - 2024 (ICMPC'24), 27th–29th, June 2024, Nirma University, Gandhinagar, Ahmedabad, INDIA
  7. A. P. Roy Memorial Keynote Lecture during one day workshop on "World Environment Day", 5th June, 2024, Institution of Engineers, Jharkhand State Centre, Ranchi
  8. Keynote Lecture during 2nd International Conference on Multifunctional Materials (ICMM-22), December 22nd – 24th, 2022, Geethanjali College of Engineering and Technology, Hyderabad, INDIA
  9. Keynote Lecture during 4th Innovative Product Design and Intelligent Manufacturing Systems (IPDIMS) during 25th – 26th Nov. 2022., National Institute of Technology, Rourkela, INDIA
  10. Keynote Lecture on 3D Printing Coupled Non-Traditional Machining Technique: A New Form of Hybrid Manufacturing Process, 2nd International Conference on Applied Research and Engineering (ICARAE2022) during 18th – 20th November 2022, Cape Peninsula University, Cape Town, SOUTH AFRICA.
  11. Keynote Lecture on Effective Research Paper Writing and Publishing, 1st International Conference on Sustainable Materials Science, Structures and Manufacturing (ICSMSM-2022) during 27th - 28th May 2022, Sri Venkateswara College of Engineering & Technology, Chittoor, INDIA.
  12. Keynote Lecture on Recent Advances in Rapid Prototyping Technologies, International Conference on Advances in Material Science, Mechanical and Civil Engineering (ICAMMCE 2022) during 14th – 15th February, 2022, Anna Saheb Dange College of Engineering and Technology, Ashta, Sangli, INDIA
  13. Keynote Lecture on Virtual Manufacturing with Emphasis on Gear Manufacturing, International Conference on Thermofluids and Manufacturing Science (ICTMS 2022) during 24th – 25th January 2022, Kalinga Institute of Industrial Technology, Bhubaneswar, INDIA.
  14. Keynote Lecture on Software for Optimization, International Conference on Advanced Manufacturing Systems (ICAMS 2022) during 24th – 25th January 2022, Techno Manufacturing and Consultancy Services, Srikakulam, INDIA
  15. Keynote Lecture on Additive Manufacturing Processes at 3rd Innovative Product Design and Intelligent Manufacturing Systems (IPDIMS) during 30th – 31st December 2021, National Institute of Technology, Rourkela, INDIA
  16. Keynote Lecture on Advances in Additive Manufacturing Processes at 1st International Conference on Applied Research and Engineering (ICARAE2021) during 26th – 28th November 2021, Cape Peninsula University, Cape Town, SOUTH AFRICA.
  17. Keynote Lecture on Additive Manufacturing: A Journey From 2D to 5D, 3rd International Conference on Materials, Manufacturing and Modelling (ICMMM – 2021) during 19th – 21st March 2021, VIT University, Vellore, INDIA.
  18. Keynote Lecture on 3D and 4D Printing with Emphasis with Bioprinters at 4th International Conference on Innovations in Mechanical Engineering (ICIME-2021) during 26th - 27th February, 2021, Guru Nanak Institute of Technology, Hyderabad, INDIA
  19. Keynote Lecture on Virtual Manufacturing at 2nd Innovative Product Design and Intelligent Manufacturing Systems (IPDIMS) during 12th – 13th Feb. 2021, National Institute of Technology, Rourkela, INDIA
  20. Keynote Lecture on Recycling of Oil Sludge at 5th International Online Conference on Reuse and Recycling of Materials (Polymers, Wood, Paper, Leather, Glass, Metals, Ceramics, Semi-Conductors, Water etc) and their products (ICRM – 2020), 11th – 13th December, 2020 Mahatma Gandhi University, Kottayam, Kerala, INDIA
  21. Keynote Lecture on Design Thinking at 1st International Conference on Research and Advances in Mechanical Engineering (ICRAME 2020), 10th – 11th December, 2020 Vignan Institute of Technology & Science, Deshmukhi, Hyderabad, INDIA
  22. Keynote Lecture on Engineering Materials at 2nd International Conference on Manufacturing, Material Science and Engineering 2020 (ICMMSE2020), August 7 – 8, 2020, CMR Institute of Technology, Hyderabad, INDIA
  23. Keynote Lecture on Fabrication of Functionally Graded Materials: A Review at International Conference on Recent Advances in Mechanical Engineering (ICRAME-2020), February 26–28, 2020, Andhra University College of Engineering, Visakhapatnam, INDIA
  24. Keynote Lecture on Material Characterization Using Spectroscopic and Microscopic Instruments at 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), 12 – 14 December 2019, National Institute of Technology, Rourkela, INDIA
  25. Keynote Lecture on Rapid Prototyping Coupled Non-Traditional Machining Technique – A New Form of Hybrid Manufacturing Process at 1st International Conference on Manufacturing, Material Science and Engineering 2019 (ICMMSE2019), August 16–17, 2019 CMR Institute of Technology, Hyderabad, INDIA
  26. Keynote Lecture on Virtual Manufacturing at 1st International Conference on Innovative Product Design and Intelligent Manufacturing System (ICIPDIMS-2019), May 17–18, 2019 National Institute of Technology, Rourkela, INDIA
  27. Keynote Lecture on Rapid Prototyping Coupled Non-Traditional Machining Technique at National Conference on Advancements in Materials, Design and Manufacturing Methods (AMDMM-2019), March 29 -30, 2019 National Institute of Technology, Rourkela, INDIA
  28. Keynote Lecture on Functionally Graded Materials at 9th International Conference on Materials Processing and Characterization - 2019 (ICMPC'19) March 8 - 10 2019, GRIET, Hyderabad, INDIA
  29. Keynote Lecture on Optimization Techniques at National Conference on “Application of Optimization Techniques to Engineering and Management Sciences” November 15 – 16, 2018, NSHM Knowledge Campus, Durgapur, INDIA
  30. Keynote Lecture on Additive Manufacturing at National Conference on “Recent Developments in Mechanical Engineering” (Theme: Coupled-Field Problems in Engineering), July 27 -29, 2018 National Institute of Technology, Rourkela, INDIA
  31. Keynote Lecture on Functionally Graded Materials and their Manufacturing Methods at International Conference on Emerging trends in Manufacturing, Engines and Modelling (ICEMEM 2015), 28th February-2015, NMIMS University, Shirpur, Dist. Dhule, Maharashtra, INDIA.
  32. Keynote Lecture on Optimization Techniques at International Conference on Advanced Polymeric Materials (ICAPM 2013), 11th - 13th October 2013 at Mahatma Gandhi University, Kottayam, Kerala, India.

RESOURCE PERSON

  1. One-week AICTE sponsored FDP on ‘Recent Advances in Business Analytics and Management Research’, 8th – 12th January, 2025, IIIT Ranchi.
  2. SVU Faculty Lecture Series, 24th December 2024, Swami Vivekananda University, Kolkata.
  3. SERB Sponsored Two Days Workshop On “Blockchain Technology and its application in secured energy management for Microgrid”, 14th – 15th December, 2024, BIT Mesra
  4. One-week short term Programme on ‘Sustainable Product Design and Manufacturing’, 22nd–27th July, 2024, Shri Mata Vaishno Devi University (SMVDU) Katra, INDIA
  5. Special Lecture on ‘5S’, 23rd July, 2024, JGTR, Ranchi.
  6. 5–days Faculty Development Programme on ‘Material Characterization’, 2nd – 6th July, 2024, Malla Reddy Engineering College, Hyderabad, INDIA
  7. 5–Days National Workshop on ‘Sustainable Manufacturing and Industry 4.0’, 1st–5th July, 2024, National Institute of Technology Rourkela, INDIA.
  8. 5–Days Bootcamp on ‘Drone Technologies’, 22nd–26th June, 2024, National Institute of Technology Rourkela, INDIA.
  9. One Month Summer Internship Programme on “Advanced Instrumentation Techniques for Scientific Research”, 27th May–28th June 2024, Central Instrumentation Facility (CIF), BIT Mesra
  10. 5–Days Online Training Program on "Research and Development-I,", 16th–23rd March 2024, Shri Mata Vaishno Devi University, Katra, Jammu, INDIA.
  11. 5–Days Bootcamp on ‘Drone Technologies’, 4th – 8th March 2024, National Institute of Technology Rourkela, INDIA.
  12. 5–Days Online Training Program on "Sustainable Green Manufacturing,", 4th–8th March 2024, Shri Mata Vaishno Devi University, Katra, Jammu, INDIA
  13. ICSSR Sponsored two weeks Capacity Building Programme (CBP), 8th January 2023, Dr. Rajendra Prasad Central Agricultural University, Pusa.
  14. One day Workshop on Intellectual Property Right, 4th November 2023 Radha Govind University, Ramgarh.
  15. Guest Lecture on “Writing Quality Research Papers and Publishing”, 11th October 2023 IQAC – GCET, Hyderabad.  
  16. Expert Lecture on “Additive Manufacturing”, 11th October 2023 GRIET, Hyderabad.  
  17. 5-day Bootcamp on ‘Drone Technologies’, 2nd–6th September 2023 National Institute of Technology Rourkela, INDIA.
  18. One day Workshop on Intellectual Property Right, 11th August 2023 RTC Institute of Technology, Ranchi.
  19. Expert Lecture on Effective Research Paper Writing – Augmenting Students’ employability, 10th August 2023 RKDF University, Ranchi.  
  20. One day Workshop on Paper Writing – The State of Art, 4th August 2023 RTC Institute of Technology, Ranchi.
  21. 5-day National Workshop on “3D Printing: State-of-Art and Future Prospects (3DP-2023)”, 15th–19th July 2023. National Institute of Technology Rourkela, INDIA.
  22. 5-day National Workshop on “Realizing Key-Enablers to Achieve the 21st Century Vision in Academies: In the Context of Indian Technical Institutions (RKE-21CVA 2023)”, 08th – 12th Jul 2023. National Institute of Technology Rourkela, INDIA.
  23. 5-day National Workshop on “Additive Manufacturing: Knowledge and Skill Development towards Industry 4.0 (AM-KSD 2023)”, 10th–14th June 2023. National Institute of Technology Rourkela, INDIA.
  24. Five Days Workshop on “Advances in Natural Fiber Reinforced Polymer Composites (ANFRPC-2023)”, 24th–28th April 2023 National Institute of Technology Rourkela, INDIA.
  25. One day seminar and hands-on-training on Machining, 20th April 2023 Usha Martin University, Ranchi.
  26. One day FDP, 18th April 2023, Xavier Institute of Polytechnique and Technology, Ranchi.
  27. 5-day Bootcamp on ‘Drone Technologies’, 18th–22nd March 2023 National Institute of Technology Rourkela, INDIA.
  28. Technical Review meeting on 23rd March 2023, ARCI Hyderabad, India
  29. One day Lecture on Professional Approach on Mould Design, 15th March 2023, JGTR, Ranchi.
  30. One day Lecture on 5S, 21st January 2023, JGTR, Ranchi.
  31. One-week High End Workshop (KARYASHALA) on ‘Artificial Intelligence Techniques for Machinery Condition Monitoring', 9th–15th January 2023, National Institute of Technology Rourkela, INDIA.
  32. Expert Talk in One day Workshop on Intellectual Property Right, 8th January 2023 Nutan Mahavidyalaya, Selu.
  33. ATAL Faculty Development Program on “Innovations in Computer Aided Design Simulations”, December 12th – 23rd 2022, National Institute of Technology Rourkela, INDIA.
  34. Resource Person for Skilling Workshop on 3D Printing, 14th – 18th December 2022, AICTE IDEA Lab, Birla Institute of Technology, Mesra, Ranchi, INDIA.
  35. Resource Person for MBA Induction Programme 2022, 7th – 9th December 2022, Sidho Kanho Birsha University, Purulia, INDIA.
  36. One-week High End Workshop (KARYASHALA) on ‘Joining Techniques for Modern Transportation Sector’, December 5th – 11th 2022, Birla Institute of Technology, Mesra, Ranchi, INDIA.
  37. Faculty Development Programme (FDP) on “Teaching, Learning & Research", November 1st - 7th 2022, Usha Martin University, Ranchi, INDIA
  38. Resource Person for one day workshop on Effective research paper writing, September 3rd 2022, Usha Martin University, Ranchi, INDIA
  39. Resource Person for one day workshop on Project Proposal Writing, July 30th 2022, Cambridge Institute of Technology, Ranchi, INDIA
  40. Five Days Short Term Programme on “Research Methodology in Engineering: A Practical Insight for Researchers”, July 23rd – 27th 2022, National Institute of Technology Rourkela, INDIA
  41. Faculty Development Programme (FDP) on “Manufacturing & Characterization of Advanced Materials”, March 14th – 21st 2022, National Institute of Technology Warangal, INDIA
  42. Five Days On-Line Faculty Development Programme on “Advances in Research, Professional Development and Academic Leadership” under GURU-DAKSHTA Scheme, February 21st – 25th, 2022. Amity Institute of Applied Sciences, Amity University, Sector-125, Noida, INDIA   
  43. Faculty Development Program (Online) under Pandit Madan Mohan Malaviya National Mission on Teachers and Teaching of MOE, GOI, on “Sustainable Product Design and Manufacturing”, January 10th – 14th, 2022. Shri Mata Vaishno Devi University, Katra, Jammu, INDIA
  44. ONLINE-Faculty Development Program on “Application of Artificial Intelligence in Mechanical Engineering”, June 2nd - June 4th, 2021. Dr N.G.P. Institute of Technology, Coimbatore, Tamilnadu, INDIA
  45. TEQIP - III Sponsored workshop on “Human Values and Ethics for Engineers” February 25th – March 1st, 2021. Jaipur Institute of Technology, Jaipur, INDIA
  46. Two Week FDP on “Artificial Intelligence for Industry 4.0” February 22nd – March 9th, 2021. CMR Institute of Technology, Hyderabad, INDIA
  47. One Day FDP on “Effective Paper Writing and Publishing”, February 20th, 2021. Dr. B. C. Roy Engineering College, Durgapur, INDIA. 
  48. AICTE Sponsored One week FDP on “Advanced Materials in Modern Manufacturing and Sustainability”, February 8th – 12th, 2021. Poojya Doddappa Appa College of Engineering, Karnataka,INDIA.
  49. Orientation Session on NEP 2020, January 8th, 2021. Guru Nanak Institutions, Khanapur Village, Manchal Mandal, Ibrahimpatnam, Telangana, INDIA
  50. AICTE Sponsored QIP on “Research Methodology and Statistical Data Analysis”, December 14th – 26th, 2020. Chaitanya Bharathi Institute of Technology, Hyderabad, INDIA
  51. AICTE Sponsored FDP on “Frontier of 3D Printing Technology and its Industrial Applications”, November 7th – December 19th, 2020. Lakireddy Balireddy college of Engineering, Kakinada, INDIA
  52. AICTE-under AQIS Scheme- Funded-STTP on Advance of Materials Design, Machining and Characterization (AMDMC-2020), November 22nd, 2020. Veer Surendra Sai University of Technology Burla, Odisha, INDIA
  53. AICTE Sponsored One Week Online Short-Term Training Program on “Research Aspects of Powder Metallurgy Based Direct Digital Manufacturing” November 2nd, 2020. Mepco Schlenk Engineering College, Sivakasi, INDIA
  54. Faculty Development Programme (FDP) on “Multiobjective Optimization Design and Industrial Applications”, September 4th, 2020, Baba Institute of Technology and Science, Vishakhapatnam, INDIA
  55. AICTE Sponsored One Week Online Short-Term Training Program on “Powder Metallurgy Technologies For 3d Printing” August 17th, 2020. Mepco Schlenk Engineering College, Sivakasi, INDIA 
  56. One Day Webinar on Effective Research Paper Writing and Publishing, Aug 15, 2020. CMR Institute of Technology, Hyderabad, India
  57. Five Days Faculty Development Programme on Recent Trends in Mechanical Engineering, Aug 10 – 14, 2020. Department of Technical Education (Government of Andhra Pradesh), Prasadampaadu, Vijayawada, Krishna District, A.P, India
  58. One Day Webinar on Design Thinking and Digital Thinking, Aug 8, 2020. CMR Institute of Technology, Hyderabad, India
  59. AICTE Sponsored One Week Online Short-Term Training Program on 3D Printing merges with Nano materials in Medical Applications, Aug 3 – 8, 2020. Guru Nanak Institutions, Khanapur Village, Manchal Mandal, Ibrahimpatnam, Telangana, India
  60. AICTE Sponsored One Week Online Short-Term Training Programme on Recent Advances in Materials and Manufacturing: Part1 (RAMM 2020:1), Aug 3 – 8, 2020. Gayatri Vidya Parishad College of Engineering, Madhurawada, Visakhapatnam, Andhra Pradesh, India.
  61. One Week Online Faculty Development Program on Optimization Techniques for Mechanical Engineers, July 27 – Aug 1, 2020. Vignan Institute of Technology and Science, Deshmukhi, Hyderabad, India.
  62. Online Faculty Development Programme (Webinar) on Demystify Design Thinking in Multidisciplinary Engineering: IT Approaches, July 27 – Aug 1, 2020, Ramaiah Institute of Technology, Bangalore, Karnataka, India
  63. AICTE Sponsored Two-week QIP, March 06th – 19th, 2020. Birla Institute of Technology, Mesra, INDIA.
  64. One day Lecture on Industry 4.0, 14th February 2020, JGTR, Ranchi.
  65. Short Term Course on Artificial Intelligence Techniques for Vibration Signal Processing (AITVSP-2019), December 9–13, 2019, National Institute of Technology, Rourkela, Odisha, India.
  66. Two Days Workshop on 3D Printing Technology & Art of Project Proposal and Technical Article/Journal Writing, December 6–7, 2019, Karunya Institute of Technology and Sciences, Karunya University, Coimbatore, Tamilnadu
  67. Faculty Development Programme on Research Project Proposal and Research Paper writing, 11-13 July 2019, Amity University Jharkhand, Ranchi, India. 
  68. Faculty Development Programme on Advanced Manufacturing Technologies, 10–11 May, 2019, CMR Institute of Technology, Hyderabad, Telangana, India.
  69. Eight Days Hands – on – Workshop on Application of Robotics & Automation Technology for Industrial Development, April 22–29, 2019, RTC Institute of Technology, Ranchi, Jharkhand, India 
  70. TEQIP-III Sponsored Short-Term Course on Advances in Computer Aided Design and Manufacture (ACADM-2018), May 21–25, 2018, National Institute of Technology, Rourkela, Odisha, India.
  71. AICTE Sponsored QIP 2018 organized by Department of Production Engineering, 25th June–7th July, 2018, Veer Surendra Sai University of Technology, Odisha.
  72. TEQIP sponsored Workshop on Advances of Mechanical Engineering, 24th – 25th February – 2016, Narula Institute of Technology, Kolkata.
  73. TEQIP sponsored One Week Short Term Training on Analysis of Composite Materials, 19th–23rd January, 2015, BIT Mesra.
  74. AICTE Sponsored QIP 2014 organised by Department of Pharmaceutical Science and Technology, 21st November–4th December, 2014, BIT Mesra.
  75. Two days’ workshop on Fundamental on Quality Management System and Test & Evaluation of Range Instrumentation, September 1st – 2nd, 2011, ITR Chandipur, Odisha

SESSION CHAIR

  1. 3rd International Conference on Multifunctional Materials (ICMM-24), December 19th – 21st, 2024, Geethanjali College of Engineering and Technology, Hyderabad, INDIA
  2. 14th International Conference on Materials Processing and Characterization - 2023 (ICMPC'23), 14th ICMPC, Hyderabad, March 24th–26th, 2023, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad-500090 Telangana, INDIA.
  3. 2nd International Conference on Multifunctional Materials (ICMM-22), December 22nd – 24th, 2022, Geethanjali College of Engineering and Technology, Hyderabad, INDIA
  4. International Conference on Recent Advances in Mechanical Engineering (ICRAME-2020), February 26–28, 2020, Andhra University College of Engineering, Visakhapatnam, INDIA
  5. 2nd International Conference on Processing and Characterization of Materials (ICPCM-2019), 12 – 14 December 2019, National Institute of Technology, Rourkela, INDIA
  6. 1st International Conference on Manufacturing, Material Science and Engineering 2019 (ICMMSE2019), August 16–17, 2019 CMR Institute of Technology, Hyderabad, INDIA
  7. 1st International Conference on Innovative Product Design and Intelligent Manufacturing System (ICIPDIMS-2019), 17th – 18th May – 2019, National Institute of Technology, Rourkela, INDIA
  8. 9th International Conference on Materials Processing and Characterization - 2019 (ICMPC'19), 8th - 10th March – 2019, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad-500090 Telangana, INDIA.
  9. National Conference on “Recent Developments in Mechanical Engineering” (Theme: Coupled-Field Problems in Engineering), July 27–29, 2018, National Institute of Technology, Rourkela, INDIA.
  10. 8th International Conference on Materials Processing and Characterization - 2018 (ICMPC'18), 16th - 18th March – 2018, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad-500090 Telangana, INDIA.
  11. 7th International Conference on Materials Processing and Characterization (ICMPC'17), 17th - 19th March – 2017, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad-500090 Telangana, INDIA.
  12. 1st International Conference on Chemical Engineering & Advanced Polymeric Materials - 2016 (ICEAPM'16), 18th - 20th August-2016, Birla Institute of Technology, Mesra, Ranchi, Jharkhand, India.
  13. 6th International Conference on Materials Processing and Characterization (ICMPC'16), 14th - 15th March – 2016, Gokaraju Rangaraju Institute of Engineering & Technology, Hyderabad-500090 Telangana, INDIA.
  14. International Conference on Advances in Applied Engineering and Technology - 2015 (ICAAET'15), 14th - 16th May-2015, Syed Ammal Engineering College, Ramanathapuram, Tamilnadu, India.
  15. International Conference on Emerging trends in Manufacturing, Engines and Modelling (ICEMEM 2015), 27th - 28th February-2015, NMIMS University, Shirpur.
  16. 12th Global Congress on Manufacturing and Management (GCMM 2014), 8th - 10th December-2014, VIT University, Vellore.
  17. International Conference on Modeling, Optimization and Computing (ICMOC 2014), (10th – 11th April, 2014), NI University, Kanyakumari.
  18. International Conference on Advances in Manufacturing and Materials Engineering (ICAMME-2014), (27th – 29th March, 2014), NITK Surathkal
  19. International Conference on Design and Manufacturing (IConDM-2013), (18th – 20th July, 2013), IIITD&M, Kancheepuram, Chennai.

EDITOR, EDITORIAL BOARD MEMBER, REVIEWER

  1. Editorial Advisory Board Member AMME book series for International Publisher of Progressive Information Science and Technology Research (IGI Global), USA
  2. Research Insights Editorial Advisory Board Member for International Publisher of Progressive Information Science and Technology Research (IGI Global) , USA.
  3. Editorial Board Member and Reviewer for REST Journal on Emerging trends in Modelling and Manufacturing.
  4. Editorial Board Member and Reviewer for International Journal of Scientific Engineering and Technology.
  5. Editorial Board Member and Reviewer for Indian Journal of Scholarly Research.
  6. Editorial Board Member and Reviewer for Journal of Mechanics & Industry Research.
  7. Editorial Board Member and Reviewer for International Journal of Innovative Research in Science, Engineering and Technology.
  8. Reviewer for Mathematical Problems in Engineering.
  9. Reviewer for Shock and Vibration.
  10. Reviewer for Materials Today: Proceedings.
  11. Reviewer for Materials Science for Energy Technologies.
  12. Reviewer for Journal of Computational Design and Engineering.
  13. Reviewer for Multidiscipline Modelling in Materials and Structures
  14. Reviewer for International Journal of Numerical Methods for Heat and Fluid Flow
  15. Reviewer for Scientia Iranica Journal.
  16. Reviewer for Journal of Engineering.
  17. Reviewer for American Journal of Materials Engineering and Technology.
  18. Reviewer for Advances in Manufacturing.
  19. Reviewer for Journal of the Taiwan Institute of Chemical Engineers.
  20. Reviewer for International Journal of Advanced Material Processing and Characterization

 

TECHNICAL COMMITTEE MEMBER

  1. Member, Institute Innovation Council of CMR Institute of Technology, Hyderabad, INDIA

CONFERENCE TECHNICAL COMMITTEE MEMBER

  1. International Conference on Material Engineering and Manufacturing (ICMEM2017)
  2. International Conference on Material Engineering and Advanced Manufacturing Technology (MEAMT 2017)
  3. International Conference on Emerging Technology in Structural Engineering (ICETSE-2017)
  4. International Conference on Innovations & Developments for Future Smart Cities (ICIDSC-17)
  5. International Conference on Advances in Mechanical Engineering (ICAMES-2017)
  1. International Conference on Process of Electrical Power and Energy Systems (ICEPES-2017)
Publications

International Journal Publications (170)

Journals Indexed in SCI / SCIE/ ESCI (41)

2025

  1. Tribological Performances of Hybrid Polybutylene Terephthalate based Polymer Composites with Nano Inorganic Reinforcements, Jeenendra Kumar Shiv, Kaushik Kumar and Sudeepan Jayapalan, Surface Review and Letters (Under Review), ISSN: 1793-6667 (IF 1.2)
  2. Hybrid Optimization of Electrical Discharge Machining Parameters with Indigenously Developed Software: A Study on Surface Roughness and Material Removal, Bikash Panja, Sanjiv Tiwari, Ritesh Singh and Kaushik Kumar. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture (Under Review), ISSN: 0954–4054 (IF 1.9)
  3. Influence of TiB2 Wt.% on the Microstructural and Mechanical Properties of Aluminium 6061 (X wt. %) TiB2 Composites: A Comparative Study, Anshu Anand, Sanjiv Kumar Tiwari, Ved Prakash, Sujeet Kumar Gautam, Ritesh Kumar Singh and Kaushik Kumar, Journal of Polymer and Composites (Accepted) ISSN: 2321–2810 (IF NA)
  4. Computational Investigation on Ablation Kinetics of Graphene and Carbon Nanotube Reinforced Thermoset Polymeric Composites, Karan Kumar, Dhrub Narnolia, Rahul Raj, P.K. Jain and Kaushik Kumar, International Journal of Computational Methods https://doi.org/10.1007/s12008-024-02208-z ISSN: 1793–6969 (IF 1.4)

2024

  1. Flight of Inspiration: Mimicking Nature's Mastery in Micro Air Vehicle Design, Jeenendra Kumar Shiv, Kaushik Kumar and Chikesh Ranjan, International Journal on Interactive Design and Manufacturing; 18, 3603–3611; ISSN: 2600-7916. (IF 2.1) https://doi.org/10.1007/s12008-024-01967-z
  2. State-of-the-art on Advancements in Carbon–Phenolic and Carbon–Elastomeric Ablatives, Amit Kumar, Chikesh Ranjan, Kaushik Kumar, M Harinatha Reddy, B Sridhar Babu, Jitendra Kumar Katiyar, Polymers; 16(11), 1461; https://doi.org/10.3390/polym16111461; ISSN: 2073-4360 (IF 5.0)
  3. Optimizing Stir Casting Parameters for Aluminium Metal Matrix Composite Fabrication: A Hybrid Approach, Anshu Anand, Sanjiv Kumar Tiwari, Ved Prakash, Ritesh Kumar Singh and Kaushik Kumar, International Journal on Interactive Design and Manufacturing; https://doi.org/10.1007/s12008-024-01895-y ISSN: 2600-7916. (IF 2.1)

2023

  1. Comparative Study on Controllable Electro-Magneto Rheological Fluids - a Brief Review, Ranjan Kumar, Apurba Kumar Roy and Kaushik Kumar, Journal of Molecular and Engineering Materials; 11 (1 & 2) (Article ID 2330002 (11 pages)) https://doi.org/10.1142/S2251237323300024; ISSN: 2251-2381
  2. Investigation of Mechanical, Tribological and Electrical Properties of Silk Reinforced Polymeric Composite, Chikesh Ranjan, Gautam Sarkhel and Kaushik Kumar, Advances in Materials Science and Engineering; https://doi.org/10.1155/2023/1507891 (Article ID 1507891); ISSN: 1687-8442 (IF 2.098)
  3. Mathematical and Simulation Based Investigation Towards Deformation Behavior of Bombyx Mori Moth Silk /Vinyl Ester Reinforced Laminated Composite, Chikesh Ranjan, Gautam Sarkhel and Kaushik Kumar, Advances in Materials and Processing Technologies; 10 (2), 596–607, https://doi.org/10.1080/2374068X.2023.2180908; ISSN: 2374-0698 (IF 1.76)
  4. Recent Advances in Polymer Using Metal Oxides Nanocomposite and Its Hybrid Fillers for Tribological Application, Jeenendra Shiv, Kaushik Kumar, Sudeepan Jayapalan, Advances in Materials and Processing Technologies; 10 (4), 2720–2731, https://doi.org/10.1080/2374068X.2023.2171673; ISSN: 2374-0698 (IF 1.76)
  5. Heat Conduction in an Orthotropic Material – Numerical Analysis Using Python, Arpan Kumar, Apurba Kumar Roy and Kaushik Kumar, International Journal on Interactive Design and Manufacturing; https://doi.org/10.1007/s12008-022-01051-4; 17 (3), 1089–1097, 2023 ISSN: 2600-7916 (IF 2.681)
  6. Virtual Prediction and Estimation of the Tensile Properties of Engineering Materials, Hridayjit Kalita and Kaushik Kumar, International Journal on Interactive Design and Manufacturing; https://doi.org/10.1007/s12008-022-01040-7; 17 (1), 407–419, 2023 ISSN: 2600-7916. (IF 2.639)

2022

  1. Piezoelectric Smart Material Based Self-Charging Supercapacitor – An Extensive Review, Ranjan Kumar and Kaushik Kumar, Indian Journal of Engineering & Materials Sciences; 29, pp. 738–743; https://doi.org/10.56042/ijems.v29i6.70245; ISSN: 0975-1017 (IF 0.615)
  2. Residual Stress Distribution in Selective Laser Melting of SS316L Parts, Harinadh Vemanaboina, Paolo Ferro, B Sridhar Babu, Edison Gundabattini, Kaushik Kumar and Filippo Berto, Advances in Materials Science and Engineering 2022 (Article ID 5687407); https://doi.org/10.1155/2022/5687407, ISSN: 1687-8442 (IF 2.098)
  3. Effect of Macro, Micro and Nano Loads on The Indentation Behaviour of Ti-6Al-4V And Haynes 242 Alloys, B Sridhar Babu, A Kumaraswamy and Kaushik Kumar, International Journal of Automotive and Mechanical Engineering (IJAME); 19(2), 9816–9822, 2022, https://doi.org/10.15282/ijame.19.2.2022.15.0757; ISSN: 2180–1606 (IF 0.331)
  4. Priority Flow Divider Valve and its dynamic analysis using various hydraulic drive systems: A Bond Graph approach, Dharmendra Kumar, Anil C Mahato, Om Prakash, and Kaushik Kumar, Mechanical Sciences, 13, 459–472, 2022, https://doi.org/10.5194/ms-13-459-2022; ISSN: 2191 - 916X (IF 1.086) 
  5. Python Assisted Numerical Analysis of Heat Conduction for an Orthotropic Material, Ashutosh Ranjan, Arpan Kumar, Apurba Kumar Roy and Kaushik Kumar, Advances in Materials and Processing Technologies; 8 (S4), 2014–2028, 2022,    https://doi.org/10.1080/2374068X.2022.2031561 ISSN: 2374-0698 (IF 1.76)
  6. Visualization Of Thermal Distribution During Machining of Dental Implants, Apurba Kumar Roy and Kaushik Kumar, Biointerface Research in Applied Chemistry, 12 (4), (2022); 4637 – 4648. https://doi.org/10.33263/BRIAC124.46374648; ISSN: 2069-5837 (IF 1.949).

2021

  1. Effect of Heat Input on Distortions and Residual Stresses Induced by Gas Tungsten Arc Welding in SS 316L To INCONEL625 Multipass Dissimilar Welded Joints, Harinadh Vemanaboina, Edison Gundabattini, B Sridhar Babu, Paolo Ferro and Kaushik Kumar, Advances in Materials Science and Engineering (Special Issue: Processing, Characterization, and Applications of Lightweight Materials) 2021 (Article ID 1028461); https://doi.org/10.1155/2021/1028461, ISSN: 1687-8442 (IF 2.098)
  2. Thermal and Residual Stress Distributions in Inconel 625 Butt-Welded Plates: Simulation and Experimental Validation, Harinadh Vemanaboina, Edison Gundabattini, Kaushik Kumar, Paolo Ferro and B Sridhar Babu, Advances in Materials Science and Engineering (Special Issue: Processing, Characterization, and Applications of Lightweight Materials) 2021 (Article ID 3948129), 12 pages; https://doi.org/10.1155/2021/3948129  ISSN: 1687-8442. (IF 2.098)

2020

  1. A Brief Review on Cryogenics in Manufacturing Process, Divya Zindani and Kaushik Kumar, SN Applied Sciences, 2, 1107 (2020). https://doi.org/10.1007/s42452-020-2899-5, ISSN:  2523-3971
  2. Perspective on the response of cellulosic agro waste based toughened epoxy composite under diverse constraints: Mechanical behaviour, Rahul Kumar, Kaushik Kumar and Sumit Bhowmik, Polymer Bulletin, 77 (8); 4105–4129, ISSN: 1436-2449, (SCI Indexed) (IF 2.87) (http://doi.org/10.1007/s00289-019-02952-3)
  3. Design of Mixed Flow Pump Impeller Blade using Mean Stream Line Theory and its Analysis, Divya Zindani, A. K. Roy and Kaushik Kumar, Scientia Iranica Transactions B: Mechanical Engineering, 27(1); 350–360, ISSN: 2345–3605 (SCI Indexed) (IF 0.475) (http://doi.org/10.24200/sci.2018.20829)
  4. A Machining Program Employing Slip Line Field Modelling Technique Over Other Constitutive Models, Hridayjit Kalita and Kaushik Kumar, International Journal of Manufacturing, Materials, and Mechanical Engineering, 10 (2); 18-48, ISSN: 2156-1680; (ESCI Indexed) (IF 0.165)  (http://doi.org/10.4018/IJMMME.2020040102)  

2019

  1. Advanced Production Techniques and Designing of Porous Titanium Bio Implants and Scaffolds, Hridayjit Kalita and Kaushik Kumar, Letters in Applied NanoBioScience, 8(4), 2019, pp. 698–703, https://doi.org/10.33263/LIANBS84.698703, ISSN:  2284-6808 (SCIE Indexed).
  2. Temperature Dependence of Indentation Behavior of Ti-6Al-4V Alloy for Bio Medical Applications, B. Sridhar Babu and Kaushik Kumar, Biointerface Research in Applied Chemistry, 9 (6), 2019, pp. 4629–4634; https://doi.org/10.33263/BRIAC96.629634; ISSN: 2069-5837. (SCI Indexed) (IF 1.949).
  3. Graphene-Based polymeric Nano-composites: An Introspection into Functionalization, Processing Techniques and Biomedical Applications, Divya Zindani and Kaushik Kumar, Biointerface Research in Applied Chemistry, 9 (3) (2019) 3926 - 3933; http://doi.org/10.33263/BRIAC93.926933; ISSN: 2069-5837. (SCI Indexed) (IF 1.949).
  4. Tailoring the performance of bamboo filler reinforced epoxy composite: Insights into fracture properties and fracture mechanism, Rahul Kumar, Kaushik Kumar, Sumit Bhowmik and Gautam Sarkhel, Journal of Polymer Research, 26 (2), Article Number: 54, 1 – 15; http://doi.org/10.1007/s10965-019-1720-x; (SCI Indexed) (IF 1.434)
  5. Sustainability in Bio-Metallic Orthopedic Implants, Apurba Kumar Roy and Kaushik Kumar, Biointerface Research in Applied Chemistry, 9 (1) (2019) 3825 – 3829; http://doi.org/10.33263/BRIAC91.825829; ISSN: 2069-5837. (SCI Indexed) (IF 1.949).

2018

  1. Experimental Studies on Hydrodynamic Characteristics using an Oblique Plunging Liquid Jet, Apurba Kumar Roy and Kaushik Kumar, Physics of Fluids, 30, 122107 (2018); http://doi.org/10.1063/1.5058123; ISSN: 1089 – 7666 (SCI Indexed) (IF 3.521).
  2. Mechanical characterization and quantification of tensile, fracture and viscoelastic characteristics of wood filler reinforced epoxy composite, Rahul Kumar, Kaushik Kumar and Sumit Bhowmik, Wood Science and Technology, 2018, 52 (3), 677-699, ISSN: 1432–5225 (http://doi.org/10.1007/s00226-018-0995-0) (SCI Indexed) (IF 2.109)
  3. Optimization of Machine Process Parameters in EDM for EN 31 Using Evolutionary Optimization Techniques, Nadeem Faisal and Kaushik Kumar, Technologies, 2018, 6, 54. (http://doi.org/10.3390/technologies6020054), ISSN 2227-7080 (SCI Indexed)
  4. Assessment and Response of Functionalized Cocos Nucifera Reinforced Toughened Epoxy Composite Towards Fracture and Viscoelastic Properties, Rahul Kumar, Kaushik Kumar and Sumit Bhowmik, Journal of Polymers and the Environment, 2018, Vol. 26 (6), pp 2522 – 2535, ISSN: 1572-8900 (https://doi.org/10.1007/s10924-017-1150-y). (SCI Indexed) (IF 3.667)
  5. Maximization of Cooling Effectiveness of Turbine Blade Surfaces Using Different Arrangement of Cooling Holes and Various Blowing Ratios, Madhurima Dey, Prakhar Jindal, Apurba Kumar Roy and Kaushik Kumar, Journal of Engineering Science and Technology, https://jestec.taylors.edu.my/Vol%2013%20issue%204%20April%202018/13_4_6.pdf, 2018, Vol. 13 (4), pp 909 – 924, ISSN: 1823-4690. (SCI Indexed) (IF 0.19)
  6. 3D Printing of Biomaterials: A Review, Divya Zindani and Kaushik Kumar, Biointerface Research in Applied Chemistry, 2018, Vol. 8 (1), pp 3023 – 3033, ISSN: 2069-5837. (SCI Indexed) (IF 1.949).
  7. Mechanical and Tribological Behaviour of Nano Scaled Silicon Carbide Reinforced Aluminium Composites, Nadeem Faisal and Kaushik Kumar, Journal of Experimental Nanoscience (Special Issue “Nano Material Reinforced Hybrid Composites and their Applications”), 2018, Vol. 13 (Sup 1), pp S1 – S13 (http://doi.org/10.1080/17458080.2018.1431846), ISSN: 1745-8099. (SCI Indexed) (IF. 0.863)
  8. Mechanical Behavior of Graphene and Carbon fibre Reinforced Epoxy Based Hybrid Nano Composites for Orthotic Calipers, Nisha Kumari and Kaushik Kumar, Journal of Experimental Nanoscience (Special Issue “Nano Material Reinforced Hybrid Composites and their Applications”), 2018, Vol. 13 (Sup 1), pp S14 – S23 (http://doi.org/10.1080/17458080.2018.1431847), ISSN: 1745-8099. (SCI Indexed) (IF. 0.863)

2017

  1. Polymer and metal nanocomposites in biomedical applications, Nadeem Faisal and Kaushik Kumar, Biointerface Research in Applied Chemistry, 2017, Vol. 7 (6), pp 2286 – 2294, ISSN: 2069-5837 (SCI Indexed) (IF 1.949).
  2. Establishment and effect of constraint on different mechanical properties of bamboo filler reinforced epoxy composite, Rahul Kumar, Sumit Bhowmik and Kaushik Kumar, International Polymer Processing, 2017, Vol. 32 (3), pp 308 – 315, https://doi.org/10.3139/217.3311, ISSN: 0930-777X (SCI Indexed) (IF 0.824)

2012

  1. Virtual manufacturing of various types of gears and validation of the technique using rapid prototype, Goutam Pohit and Kaushik Kumar, Virtual and Physical Prototyping, 2012, 7(2), pp 153 – 171, https://doi.org/10.1080/17452759.2012.686696, ISSN: 1745-2767 (SCI Indexed) (IF 8.092)

2008

  1. Virtual manufacturing of gears with chip formation, Kaushik Kumar, Sanat Kumar Mukherjee & Goutam Pohit, International Journal of Computer Applications in Technology (special issue on: “virtual design of industrial systems with manufacturing and assembling errors”), 33(1), 63-71, 2008, DOI: 10.1504/IJCAT.2008.021886, ISSN: 1741–5047 (SCI Indexed) (IF. 0.27)

Journals Indexed in SCOPUS/ WoS (114)

2024

  1. The Impact of Blockchain Technology on Supply Chain Efficiency: A Review, Shraddha Agrawal, Sanjiv Kumar Tiwari, Ritesh Kumar Singh and Kaushik Kumar, E3S Web Conf.; 552; 01013; ISSN: 2267-1242 https://doi.org/10.1051/e3sconf/202455201013  

2023

  1. COVID-19: Implications for Social Sustainability Through Artificial Intelligence – A Critical Review, Arpan Kumar, Harinadh Vemanaboina, B Sridhar Babu and Kaushik Kumar, AIP Conference Proceedings; 2869, 050010; https://doi.org/10.1063/5.0168262; ISSN: 0094-243X
  2. An Optimized Approach of Intelligent Path Planning of a Robot Manipulator using PSO Algorithm, Ranjan Kumar and Kaushik Kumar, AIP Conference Proceedings; 2548, 030024; https://doi.org/10.1063/5.0118788; ISSN: 0094-243X 
  3. Efficacy of Natural Fibres Reinforced Biodegradable Composite Towards Industrial Products – An Extensive Review, Chikesh Ranjan, Gautam Sarkhel and Kaushik Kumar, Materials Today: Proceedings, 92 (2), 2023, 1047-1054, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2023.04.689.
  4. Design and Numerical Simulation of a Solar Cooker with Aluminium Absorber Plate, Birendra Kishore, Apurba Kumar Roy and Kaushik Kumar, Materials Today: Proceedings, 92 (2), 2023, 1040-1046, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2023.04.688.
  5. Recent Advances in Tribological Properties of Silicon Based Nanofillers Incorporated Polymer Nanocomposites, Jeenendra Shiv, Kaushik Kumar, Sudeepan Jayapalan, Materials Today: Proceedings, 92 (2), 2023, 1231-1239, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2023.05.328.
  6. Factory Discharge Impacts on the Qualitative Nature of River Water – A Case with Tungbhadra River, M. Mohan Babu, B. Damodhara Reddy, Anand V. Shivapur, S. Ranjith, P. Narasimha Reddy, Bode Venkata Kavyateja and Kaushik Kumar, International Journal of Environmental Science and Development (IJESD); International Journal of Environmental Science and Development, 14 (2), 160–169; ISSN: 2010–0264; https://doi.org/10.18178/ijesd.2023.14.2.1429 (IF 0.54)

2021

  1. A State-of-The-Art Review on All Constitutive Models in Simulating Mechanical Behaviour of Metals and Alloys, Hridayjit Kalita and Kaushik Kumar, International Journal of Materials Engineering Innovation; 12 (4), 337 – 363; ISSN: 1757-2762; https://doi.org/10.1063/5.0057931
  2. Design and Control of a Two-Link Robotic Manipulator: A Review, Ranjan Kumar and Kaushik Kumar, AIP Conference Proceedings 2358, 050020 (2021); ISSN: 0094-243X;  https://doi.org/10.1063/5.0057931
  3. Numerical and thermal modelling of machining implants: A case with Ti6Al4V alloy with unsteady heat diffusion; Apurba Kumar Roy, P. Jeyapandiarajan and Kaushik Kumar, Materials Today: Proceedings, 46 (17), 7695–7700; ISSN: 2214-7853;  https://doi.org/10.1016/j.matpr.2021.02.145)  

2020

  1. 2D Heat Conduction on A Flat Plate with Ti6Al4V Alloy Under Steady State Conduction: A Numerical Analysis; Apurba Kumar Roy and Kaushik Kumar, Materials Today: Proceedings, 46 (1), 896 – 902; ISSN: 2214-7853; https://doi.org/10.1016/j.matpr.2020.12.1152
  2. Experimental Investigation and Comparative Analysis of Mechanical Properties of Cross Layer Rice Straw Fibers Filled Reinforced Epoxy Biodegradable Composite Chikesh Ranjan, Zaid Ahmed, Sonu R Kumar, Abhishek Kumar, Abhay Kumar and Kaushik Kumar, Materials Today: Proceedings, 46 (1), 340–344; ISSN: 2214-7853 https://doi.org/10.1016/j.matpr.2020.08.342.
  3. Fabrication and Strength analysis of Rice Straw Fibers Reinforced Epoxy Biodegradable Composite. Chikesh Ranjan, Zaid Ahmed, Sonu R Kumar, Abhishek Kumar, Abhay Kumar and Kaushik Kumar, Materials Today: Proceedings, 46 (1), 331–335; ISSN: 2214-7853 https://doi.org/10.1016/j.matpr.2020.08.299.
  4. Estimation of Tribological Properties of Orthotic Callipers Fabricated using Bamboo Reinforced Epoxy Composite, Nisha Kumari and Kaushik Kumar, Materials Today: Proceedings, 46 (1), 243–245; ISSN: 2214-7853; https://doi.org/10.1016/j.matpr.2020.07.625.
  5. Bioremediation of Oily Sludge: A Case Base Analysis to Sustainable Supply Chain, Bhaskar Sinha, Supriyo Kumar Roy and Kaushik Kumar, Resources, Environment and Sustainability, 2 (Article no. 100008); ISSN 2666-9161 https://doi.org/10.1016/j.resenv.2020.100008.
  6. Time-Temperature-Cure Process Window of Epoxy-Vinyl Ester Resin for Applications in Liquid Composite Moulding Processes, Raghu Raja Pandiyan Kuppusamy, Anita Zade and Kaushik Kumar, Materials Today: Proceedings, 39 (4), 1407-1411; ISSN: 2214-7853; https://doi.org/10.1016/j.matpr.2020.05.048.
  7. Effect of Change of Material Model in Mooney Rivlin Hyper-elastic Material, Suraj, Abhishek Kumar, Bikas Prasad and Kaushik Kumar, Materials Today: Proceedings, 26 (2), 2511 – 2514; ISSN: 2214-7853; https://doi.org/10.1016/j.matpr.2020.02.534.
  8. Strategic Planning of Optimizing Productivity: a '5S' under Lean Quality Approach, Supriyo Roy, Kaushik Kumar and Biswajit Satpathy, International Journal of Productivity and Quality Management, 32 (1), 53–71, ISSN: 1746-6482  https://doi.org/10.1504/IJPQM.2020.10028393
  9. Modeling and Simulation of Film Cooling Effectiveness on a Flat Plate, Anuj Minz, Apurba Kumar Roy and Kaushik Kumar, Materials Today: Proceedings, 22, 3261–3267; ISSN: 2214-7853 https://doi.org/10.1016/j.matpr.2020.03.287.
  10. Efficacy of Vehicle Chassis of Polymeric Composite, Nipun Sinha, and Kaushik Kumar, Materials Today: Proceedings, Vol 22 (4), pp 2638–2646; https://doi.org/10.1016/j.matpr.2020.03.395;   ISSN: 2214–7853.

2019

  1. Manufacturing Systems: Their Simulation Modelling Methods and Other Intelligent Systems, Hridayjit Kalita and Kaushik Kumar, Journal of Manufacturing Technology Research, 11 (3–4), 173 – 184 ISSN: 1943-8095.
  2. Analysis of Film Cooling Effectiveness Using Computational Approach, Anuj Minj, Kaushik Kumar and Apurba Kumar Roy, AIP Conference Proceedings 2200, 020003 (2019); https://doi.org/10.1063/1.5141173; ISSN: 0094-243X
  3. Forced Convection Heat Transfer in a Twin Cylinder System under Static Condition using Computational Approach, Sumit Chandra, Kaushik Kumar and Apurba Kumar Roy, AIP Conference Proceedings 2200, 020006 (2019); ISSN: 0094–243X https://doi.org/10.1063/1.5141176.
  4. An Insight into Additive Manufacturing of Fiber Reinforced Polymer Composite, Divya Zindani and Kaushik Kumar, International Journal of Lightweight Materials and Manufacture, 2, 267 – 278, https://doi.org/10.1016/j.ijlmm.2019.08.004; ISSN: 2588-8404
  5. Significance of Slip Line Field Model in Accommodating All Machining Complex Behaviour, Hridayjit Kalita and Kaushik Kumar, Materials Today: Proceedings, 18 (7), 2353–2360; https://doi.org/10.1016/j.matpr.2019.07.019; ISSN: 2214-7853.
  6. CFD Assisted Investigation on Adiabatic Film Cooling Effectiveness over a Flat Plate, Kunal, Apurba Kumar Roy and Kaushik Kumar, Materials Today: Proceedings, 18 (7), 3711–3716; https://doi.org/10.1016/j.matpr.2019.07.305;   ISSN: 2214–7853.
  7. Optimization of Volumetric Composition and Cross-Section of Carbon Reinforced Epoxy based Polymeric Composite Tubes in Space frame Chassis, Nipun Sinha, and Kaushik Kumar, Materials Today: Proceedings, 18(7), 3812–3820; ISSN: 2214-7853. https://doi.org/10.1016/j.matpr.2019.07.319.
  8. Application of Heuristic Optimization towards Optimal Process Parameters in Advanced Machining Process, Nadeem Faisal and Kaushik Kumar, Journal of Manufacturing Technology Research, 10 (3–4), 143–163, ISSN: 1943-8095

2018

  1. Design and Development of Hydraulic System for Rail-Road Breakdown Crane, Aditya Sethi, Shivangi Chopra and Kaushik Kumar, Materials Today: Proceedings, 2018, 5 (9/3), 20314–20320, https://doi.org/10.1016/j.matpr.2018.06.404, ISSN: 2214-7853.
  2. Material Selection for Turbine Seal Strips using PROMETHEE-GAIA Method, Divya Zindani and Kaushik Kumar, Materials Today: Proceedings, 2018, 5 (9/3), 17533 – 17539, https://doi.org/10.1016/j.matpr.2018.06.069, ISSN: 2214-7853.
  3. Design and Evaluation of Adjustable Calipers Using CAD Tools, Nisha Kumari and Kaushik Kumar, Materials Today: Proceedings, 2018, Vol. 5 (5/2), pp 13658 – 13663, https://doi.org/10.1016/j.matpr.2018.04.004, ISSN: 2214-7853.
  4. Static Structural Analysis of a Powered Ankle Foot Prosthesis Mechanism, Sanghamitra Debta and Kaushik Kumar, Materials Today: Proceedings, 2018, Vol. 5 (5/2), pp 11616 – 11621, https://doi.org/10.1016/j.matpr.2018.02.131, ISSN: 2214-7853.
  5. Design and Optimization of Mixed Flow Pump Impeller Blades with Hydrostatic Loading and Varying Semi-cone Angle, Nehal Dash, A. K. Roy and Kaushik Kumar, Materials Today: Proceedings, 2018, Vol. 5 (5/2), pp 11608–11615, https://doi.org/10.1016/j.matpr.2018.02.130, ISSN: 2214-7853.
  6. Design and Optimization of Mixed Flow Pump Impeller Blades by varying Semi-cone Angle, Nehal Dash, A. K. Roy and Kaushik Kumar, IOP Conf. Series: Materials Science and Engineering, 2018, Vol. 330, 012095, https://doi.org/10.1088/1757-899X/330/1/012095, ISSN: 1757-899X.
  7. Suitability of Composite Material for Orthotic Calipers – Tribological Study, Nisha Kumari, Samir Kumar Pradhan and Kaushik Kumar, Materials Today: Proceedings, 2018, Vol. 5, pp 5608 – 5614, https://doi.org/10.1016/j.matpr.2017.12.152, ISSN: 2214-7853.
  8. Design validation & stress analysis of mixed flow pump impeller blades under applied uniformly distributed and uniformly varying loads, Sambhrant Srivastava, A. K. Roy and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2017.12.036, 2018, Vol. 5, pp 4446 – 4452, ISSN: 2214-7853.
  9. Design and Optimization of Mixed Flow Pump Impeller Blades – A Review, Nehal Dash, A. K. Roy and Kaushik Kumar, Materials Today: Proceedings, 2018, Vol. 5, pp 4460 – 4466, https://doi.org/10.1016/j.matpr.2017.12.015, ISSN: 2214-7853.
  10. Biomedical Design of Powered Ankle- Foot Prosthesis – A Review, Sanghamitra Debta and Kaushik Kumar, Materials Today: Proceedings, 2018, Vol. 5, pp 3273 – 3282, https://doi.org/10.1016/j.matpr.2017.11.569, ISSN: 2214-7853.
  11. Design and Analysis of Powered Ankle Foot Prosthesis Mechanism Using Hydraulic System, Sanghamitra Debta and Kaushik Kumar, Applied Mechanics and Materials, Trans Tech Publications, https://doi.org/10.4028/www.scientific.net/AMM.877.384; 2018, Vol. 877, pp 384-390, ISSN: 1662-7482.
  12. Application of Composites in Orthotic Calipers and its Experimental Validations, Nisha Kumari and Kaushik Kumar, Applied Mechanics and Materials, Trans Tech Publications, https://doi.org/10.4028/www.scientific.net/AMM.877.44, 2018, Vol. 877, pp 44-49, ISSN: 1662-7482.
  13. Static Structural Analysis of Piston Valve of Twin Tube Dampers, Dheeman Bhuyan and Kaushik Kumar, IEEE Explore Digital Library, https://doi.org/978-1-5090-4307-1/17/$30.00, 2018, pp 9 – 11.
  14. Mechanisms and Materials of Orthotic Calipers for Polio Infected Patients – A Review, Nisha Kumari and Kaushik Kumar, IEEE Explore Digital Library, https://doi.org/978-1-5090-4307-1/17, 2018, pp 12 – 19.

2017

  1. Comparison of Stresses in Blade of a Mixed Flow Pump Impeller Designed Using Mean Stream Line Method and Free Vortex Method, Divya Zindani, Apurba Kumar Roy and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2017.07.293, 2017, Vol. 4 (8), pp 9333 – 9340, ISSN: 2214-7853.
  2. 3D CAD modelling and computational ?uid analysis of piston valve of twin tube shock absorbers, Dheeman Bhuyan and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2017.07.073, 2017, Vol. 4 (8), pp 7420 – 7425, ISSN: 2214-7853.
  3. Effect of Process Parameters on MRR and Surface Roughness in ECM of EN 31 Tool steel Using WPCA: MRR and Surface Roughness in ECM of EN 31 steel, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, International Journal of Materials Forming and Machining Processes, https://doi.org/10.4018/IJMFMP.2017070104, 2017, Vol. 4, No. 2, pp 45 – 63,
  4. Material Analysis for Blade of a Mixed Flow Pump Impeller Designed Through Mean Stream Line Method, Divya Zindani, Apurba Kumar Roy and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2017.01.181, 2017, Vol. 4 (4/A), pp 1580 – 1589, ISSN: 2214-7853. 
  5. Computational Fluid Flow Analysis of Base Valve for Twin Tube Shock Absorbers, Dheeman Bhuyan and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2017.02.079, 2017, Vol. 4 (4/A), pp 2308 – 2313, ISSN: 2214-7853.

2016

  1. Mechanical and tribological behavior of ABS/TiO2 polymer composites and optimization of tribological properties using grey relational analysis, J. Sudeepan, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Journal of the Institution of Engineers (India): Series C, 2016 Vol. 97(1), pp 41–53 https://doi.org/10.1007/s40032-015-0192-y, ISSN: 2250-0553
  2. Design of Blade of Mixed Flow Pump Impeller Using Mean Stream Line Method, Divya Zindani, Apurba Kumar Roy and Kaushik Kumar, Procedia Technology, 2016 Vol.23, pp 464–471, https://doi.org/10.1016/j.protcy.2016.03.051, ISSN: 2212-0173.
  3. Strategic Process Optimization for Tribological Behavior of Silica Gel Reinforced Aluminum Composite material by Neuro-Grey Modeling, Anuj Dixit, Supriyo Roy and Kaushik Kumar, International Journal of Process Management and Benchmarking, https://dx.doi.org/10.1504/IJPMB.2016.10000283, 2016 Vol. 6(4), pp 544 – 560, ISSN: 1741-816X.
  4. Vibration Analysis of Mixed Flow Pump Impeller Blade Designed Using Mean Stream Line Method, Divya Zindani, Apurba Kumar Roy and Kaushik Kumar, Applied Mechanics and Materials, https://doi.org/10.4028/www.scientific.net/AMM.852.476,  2016, Vol. 852, pp 476 – 482, ISSN: 1662-7482.
  5. Design and Analysis of Base Valve of Twin Tube Dampers, Dheeman Bhuyan and Kaushik Kumar, Applied Mechanics and Materials, https://doi.org/10.4028/www.scientific.net/AMM.852.504, 2016, Vol. 852, pp 504 – 510, ISSN: 1662-7482.
  6. Designing of a Balanced Opposed Piston Engine, Sunil Sataba Hebbalkar and Kaushik Kumar, Applied Mechanics and Materials, https://doi.org/10.4028/www.scientific.net/AMM.852.719, 2016, Vol. 852, pp 719 – 723, ISSN: 1662-7482.

2015

  1. Optimization and Prediction of Surface Roughness in Die Sinking Electro-Discharge Machining of EN45 Steel Tool, Sumit Raj and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaer_spl/ijaerv10n11spl_03.pdf, 2015, Vol. 10, No.11, pp. 10054 – 10057, ISSN: 0973-4562.
  2. Optimization of Wear Characteristics of Silica Gel Reinforced Aluminium Metal Matrix Composite Using Taguchi Method, Anuj Dixit and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaer_spl/ijaerv10n11spl_04.pdf, 2015, Vol. 10, No. 11, pp. 10058 – 10062, ISSN: 0973-4562.
  3. Optimization of Overcut and MRR in Electrochemical Machining of EN 19 Tool Steel using Grey-Taguchi Approach, Abhishek Tiwary, Amitava Mandal and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaer_spl/ijaerv10n11spl_06.pdf, 2015, Vol. 10, No. 11, pp. 10070 – 10074, ISSN: 0973-4562.
  4. Optimization of Surface Roughness in Electrochemical Machining for EN 19 Using Artificial Neural Network, Abhishek Tiwary, Amitava Mandal and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaer_spl/ijaerv10n11spl_07.pdf, 2015, Vol. 10, No. 11, pp. 10075 – 10079, ISSN: 0973-4562.
  5. Study of Mechanical Properties of Kaolin Reinforced Epoxy Composite, Arnav Prakash, Gautam Sarkhel and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaer_spl/ijaerv10n11spl_08.pdf, 2015, Vol. 10, No. 11, pp. 10080 – 10084, ISSN: 0973-4562.
  6. Prediction of Surface Roughness in Plasma Arc Cutting of EN31 Steel Using Artificial Neural Network, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaer_spl/ijaerv10n11spl_09.pdf, 2015, Vol. 10, No. 11, pp. 10085 – 10089, ISSN: 0973-4562.
  7. Analysis of Mixed Flow Pump Impeller of Stainless-Steel Material Using ANSYS, Santosh Shukla, Apurba Kumar Roy and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaer_spl/ijaerv10n11spl_27.pdf, 2015, Vol. 10, No. 11, pp. 10181 – 10186, ISSN: 0973-4562.
  8. Optimization of Wear rate and Coefficient of Friction in Silica Gel Reinforced Aluminium Metal Matrix Composites Using Grey-Taguchi Technique, Anuj Dixit and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaer_spl/ijaerv10n11spl_32.pdf, 2015, Vol. 10, No. 11, pp. 10208 – 10212, ISSN: 0973-4562.
  9. Optimization of WEDM Process Parameters for MRR and Surface Roughness using Taguchi-Based Grey Relational Analysis, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, International Journal of Materials Forming and Machining Processes, http://doi.org/10.4018/ijmfmp.2015010101, 2015, Vol. 2, No. 1, pp. 1 – 25.
  10. Prediction of Surface Roughness in EDM using Response Surface Methodology and Artificial Neural Network, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman, and Prasanta Sahoo, Journal of Manufacturing Technology Research, ISSN: 2250-0553, 2015, Vol.6, No. 3/4, pp. 93 – 112.
  11. Study of mechanical and tribological properties of ABS/clay polymer composite using Taguchi optimization method, J. Sudeepan, K. Kumar, T. K. Barman, and P. Sahoo, Journal of Manufacturing Technology Research, ISSN: 2250-0553, 2015, Vol.6, No. 3/4, pp. 153 – 175.
  12. Optimization of MRR and Overcut in Die Sinking Electro-Discharge Machining of EN45 Material Using Grey-Taguchi Technique, Sumit Raj and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_703.pdf, 2015, Vol. 10, No. 55, pp. 3652 – 3656, ISSN: 0973-4562.
  13. Optimization of Thickness of Blades of Different Materials in a Mixed Flow Pump Impeller, Santosh Shukla, Apurba Kumar Roy and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_704.pdf, 2015, Vol. 10, No. 55, pp. 3657 – 3661, ISSN: 0973-4562.
  14. Genetic Algorithm Based Optimization for Decision Making on Process Parameters: A Soft Computing Approach, Supriyo Roy and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_705.pdf, 2015, Vol. 10, No. 55, pp. 3662 – 3667, ISSN: 0973-4562.
  15. Optimization of Tensile Strength and Flexural Strength in Silica Gel Reinforced Aluminium Metal Matrix Composites Using grey-Taguchi Method, Anuj Dixit and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_706.pdf, 2015, Vol. 10, No. 55, pp. 3667 – 3672, ISSN: 0973-4562.
  16. Multi-objective Strength Optimization for Kaolin Reinforced Epoxy Composite Using Grey-Taguchi Approach, Arnav Prakash, Gautam Sarkhel and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_707.pdf, 2015, Vol. 10, No. 55, pp. 3673 – 3677, ISSN: 0973-4562.
  17. Optimization of ECM Process for machining of EN-19 with Multiquality Characteristics via Grey–Taguchi Approach, Abhishek Tiwari, Amitava Mandal and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_708.pdf, 2015, Vol. 10, No. 55, pp. 3678 – 3682, ISSN: 0973-4562.
  18. Optimization of Material Removal Rate in Electrochemical Machining for EN 19 Material Using Fuzzy logic, Abhishek Tiwari, Amitava Mandal and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_709.pdf, 2015, Vol. 10, No. 55, pp. 3683 – 3688, ISSN: 0973-4562.
  19. Management of Micro Irrigation System in Arid Areas of India: A Conceptual Framework, R.K.Vyas, Supriyo Roy and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_710.pdf, 2015, Vol. 10, No. 55, pp. 3689 – 3693, ISSN: 0973-4562.
  20. Optimization of process parameters in Electro-Discharge Machining of Aluminium Carbide composite based on MRR using Taguchi Technique, Utkarsh and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_713.pdf, 2015, Vol. 10, No. 55, pp. 3707 – 3711, ISSN: 0973-4562.
  21. Optimization of Wear Characteristics of Silica Gel Reinforced Aluminium Metal Matrix Composites Based on Taguchi Coupled Fuzzy Logic, Anuj Dixit and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_718.pdf, 2015, Vol. 10, No. 55, pp. 3736 – 3740, ISSN: 0973-4562.
  22. Application of Grey-Taguchi Technique for Optimization of Overcut and Surface Roughness in Die Sinking Electro-Discharge Machining of EN45 Material, Sumit Raj and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_719.pdf, 2015, Vol. 10, No. 55, pp. 3741 – 3745, ISSN: 0973-4562.
  23. Design Optimization of a Mixed Flow Impeller Blade Adopting Taguchi Technique, Santosh Shukla, Apurba Kumar Roy and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_739.pdf, 2015, Vol. 10, No. 55, pp. 3855 – 3858, ISSN: 0973-4562.
  24. Multi-objective Optimization of Wear Properties for Kaolin Reinforced Epoxy Composite with Grey-Taguchi Technique, Arnav Prakash, Gautam Sarkhel and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_740.pdf, 2015, Vol. 10, No. 55, pp. 3859 – 3864, ISSN: 0973-4562.
  25. Role of Microfinance for Improving Quality of Life by Providing Financial Services to Low-income Group: A Critical Review, Ram Kumar Rudrabatla, Supriyo Roy and Kaushik Kumar, International Journal of Applied Engineering Research, https://www.ripublication.com/ijaerspl3/ijaerv10n55spl_796.pdf, 2015, Vol. 10, No. 55, pp. 4136 – 4142, ISSN: 0973-4562.
  26. Analysis of Mechanical Properties of Wood Dust Reinforced Epoxy Composite Using Response Surface Methodology. Rahul Kumar, Kaushik Kumar and Sumit Bhowmik, Advanced Materials Research 2015, Vol 1119, pp 258-262 https://doi.org/10.4028/www.scientific.net/AMR.1119.258 
  27. Material Selection for blades of Mixed Flow Pump Impeller Using ANSYS, Santosh Shukla, Apurba Kumar Roy and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2015.07.172, 2015 Vol. 2, pp 2022 – 2029, ISSN: 2214-7853.
  28. Optimization of Overcut in electrochemical machining of EN19 Material Using Taguchi Method, Abhishek Tiwary, Amitava Mandal and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2015.07.293, 2015 Vol. 2, pp  2337 – 2345, ISSN: 2214-7853.
  29. Optimization and Prediction of Material Removal Rate in Die Sinking Electro Discharge Machining of EN45 Steel Tool, Sumit Raj and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2015.07.296, 2015 Vol. 2, pp  2346 – 2352, ISSN: 2214-7853.
  30. Optimization of Mechanical Properties of Silica Gel Reinforced Aluminium MMC by using Taguchi Method, Anuj Dixit and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2015.07.301, 2015 Vol. 2, pp 2359 – 2366, ISSN: 2214-7853.
  31. Strength Optimization for Kaolin Reinforced Epoxy Composite Using Taguchi Method, Arnav Prakash, Gautam Sarkhel and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2015.07.175, 2015 Vol. 2, pp 2380 – 2388, ISSN: 2214-7853.
  32. Multi-Objective Optimization of Electro-Chemical Machining by Non-Dominated Sorting Genetic Algorithm, Abhishek Tiwary, Amitava Mandal and Kaushik Kumar, Materials Today: Proceedings, https://doi.org/10.1016/j.matpr.2015.07.208, 2015 Vol. 2, pp  2569 – 2575, ISSN: 2214-7853.
  33. Mass Optimization of Mixed Flow Pump Impeller Blade based on Thermal and Structural Loading Conditions Blade Designed Using Mean Stream Line Theory, Divya Zindani, Apurba Kumar Roy and Kaushik Kumar, International Journal of Applied Engineering Research, 2015, Vol. 10, No. 93, pp. 195 – 198, ISSN: 0973-4562.

2014

  1. Optimization of EDM Process Parameters Using Grey-Taguchi Technique, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, International Journal of Machining and Machinability of Materials, 15(3/4), 235-261, 2014, ISSN: 1748-5711
  2. Tribological behavior of ABS/TiO2 polymer composite using Taguchi statistical analysis, J. Sudeepan, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Procedia Material Science, 2014, Vol. 5C, pp. 41-49, ISSN: 2211-8128.
  3. Optimization of Mechanical properties of epoxy based wood dust reinforced green composite using Taguchi method, Rahul Kumar, Kaushik Kumar & Sumit Bhowmik, Procedia Material Science, 2014, Vol. 5C, pp. 688-696, ISSN: 2211-8128
  4. Optimization of Process Parameters in Plasma Arc Cutting of EN 31 Steel Based on MRR and Multiple Roughness Characteristics Using Grey Relational Analysis, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Procedia Material Science, 2014, Vol. 5C, pp. 1552-1561, ISSN: 2211-8128.
  5. Effect and Optimization of Various Machine Process Parameters on the Surface Roughness in EDM for an EN19 Material using Response Surface Methodology, Shashikant, A. K. Roy & Kaushik Kumar, Procedia Material Science, 2014, Vol. 5C, pp. 1704-1711, ISSN: 2211-8128.
  6. Effect and Optimization of various Machine Process Parameters on the Surface Roughness in EDM for an EN41 Material using Grey-Taguchi, Vikas, A. K. Roy & Kaushik Kumar, Procedia Material Science, 2014, Vol. 6C, pp. 383-390, ISSN: 2211-8128.
  7. Study of friction and wear of ABS/ZnO polymer composite using Taguchi technique, J. Sudeepan, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Procedia Material Science, 2014, Vol. 6C, pp. 391-400, ISSN: 2211-8128.
  8. Design of a mixed flow pump impeller blade and its validation using stress analysis, Sambhrant Srivastava, A. K. Roy & Kaushik Kumar, Procedia Material Science, 2014, Vol. 6C, pp. 417-424, ISSN: 2211-8128.
  9. Study of mechanical properties of wood dust reinforced epoxy composite, Rahul Kumar, Kaushik Kumar, Prasanta Sahoo & Sumit Bhowmik, Procedia Material Science, 2014, Vol. 6C, pp. 551-556, ISSN: 2211-8128.
  10. Study of tribological behaviour of ABS/ CaCO3 composite using grey relational analysis, J. Sudeepan, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Procedia Material Science, 2014, Vol. 6C, pp. 682-691, ISSN: 2211-8128.
  11. Optimization of surface roughness and MRR in electrochemical machining of EN31 tool steel using Grey-Taguchi approach, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Procedia Material Science, 2014, Vol. 6C, pp. 729-740, ISSN: 2211-8128.
  12. Application of artificial bee colony algorithm for optimization of MRR and surface roughness in EDM of EN31 tool steel, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Procedia Material Science, 2014, Vol. 6C, pp. 741-751, ISSN: 2211-8128.
  13. Design of a mixed flow pump impeller and its validation using FEM analysis, Sambhrant Srivastava, Apurba Kumar Roy & Kaushik Kumar, Procedia Technology, 2014, Vol. 14C, pp. 181-187.
  14. Study of friction and wear properties of ABS/Kaolin polymer composites using grey relational technique, J. Sudeepan, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Procedia Technology, 2014, Vol. 14C, pp.196-203, ISSN: 2212-0173.
  15. Effect and Optimization of Machine Process Parameters on MRR for EN19 & EN41 materials using Taguchi, Vikas, Shashikant, Apurba Kumar Roy & Kaushik Kumar, Procedia Technology, 2014, Vol. 14C, pp. 204-210, ISSN: 2212-0173.
  16. Optimization of MRR and Surface Roughness in PAC of EN 31 Steel Using Weighted Principal Component Analysis, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Procedia Technology, 2014, Vol. 14C, pp. 211-218, ISSN: 2212-0173.
  17. Optimization of Material Removal Rate During Turning of SAE 1020 Material in CNC Lathe using Taguchi Technique, Sayak Mukherjee, Anurag Kamal, Kaushik Kumar, Procedia Engineering, 2014, Vol. 97, pp. 29 – 35, ISSN: 1877-7058.
  18. Design and Optimization of Portable Foot Bridge, Rahul and Kaushik Kumar, Procedia Engineering, 2014, Vol. 97, pp. 1041 – 1048, ISSN: 1877-7058.
  19. Investigation on Electrochemical Machining of EN31 Steel for Optimization of MRR and Surface Roughness using Artificial Bee Colony Algorithm, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Procedia Engineering, 2014, Vol. 97, pp. 1587 – 1596, ISSN: 1877-7058.
  20. Design analysis of Mixed Flow Pump Impeller Blades Using ANSYS and Prediction of its Parameters using Artificial Neural Network, Sambhrant Srivastava, Apurba Kumar Roy & Kaushik Kumar, Procedia Engineering, 2014, Vol. 97, pp. 2022 – 2031, ISSN: 1877-7058.
  21. Optimization of surface roughness in WEDM process using artificial bee colony algorithm, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, International Journal of Applied Engineering Research, 2014, Vol. 9, No.26, pp. 8748-8751, ISSN 0973-4562 
  22. Study of tribological properties of ABS/Kaolin polymer composite using Taguchi technique, J. Sudeepan, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, International Journal of Applied Engineering Research, 2014, Vol. 9, No.26, pp. 8755-8758, ISSN 0973-4562.
  23. Optimization of friction and wear properties for ABS/clay polymer composite using Grey relational technique, J. Sudeepan, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, International Journal of Applied Engineering Research, 2014, Vol. 9 No.26, pp. 8777-8780, ISSN 0973-4562.
  24. Optimization of Mixed Flow Pump Impeller Blade Thickness Using Artificial Neural Network, Sambhrant Srivastava, Apurba Kumar Roy & Kaushik Kumar, International Journal of Applied Engineering Research, 2014, Vol. 9, No.26, pp. 8815-8817, ISSN 0973-4562 
  25. Prediction of MRR in EDM of EN31 Steel Using Artificial Neural Network, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, International Journal of Applied Engineering Research, 2014, Vol. 9 No.26 pp. 8822-8825, ISSN 0973-4562.
  26. Effect and Optimization of various Machine Process Parameters on the MRR, Over-cut and Surface Roughness in EDM for an EN41 Material using Grey-Taguchi Approach, Vikas, Apurba Kumar Roy & Kaushik Kumar, International Journal of Applied Engineering Research, 2014, Vol. 9 No.26 pp. 8963-8966, ISSN 0973-4562.
  27. Artificial Neural Network Modeling for the Prediction of Surface Roughness in ECM, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, International Journal of Applied Engineering Research, 2014, Vol. 9 No.26, pp. 9251-9254, ISSN 0973-4562.

2013

  1. Optimization of Material Removal Rate in EDM Using Taguchi Method, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Advanced Materials Research, 2013, 626, pp. 270-274, ISSN: 1662-8985.
  2. Optimization of surface roughness and MRR in EDM using WPCA, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, Procedia Engineering, 2013, 64, pp. 446–455, ISSN: 1877-7058.

Journals Indexed in Others (27)

2020

  1. Cooling of Rotating Turbine Blades – A Novel Approach, Apurba Kumar Roy and Kaushik Kumar, International Journal of Advanced Materials Manufacturing & Characterization, 2020, Vol. 10 (1), pp 14 – 28, ISSN: 2277-3886
  2. Performance Evaluation of a Low Head Hydraulic Air Compressor: A Prospective Source of Renewable Energy, Apurba Kumar Roy and Kaushik Kumar, International Journal of Advanced Materials Manufacturing & Characterization, 2020, Vol. 10 (1), pp 1 – 13, ISSN: 2277-3886

2018

  1. Utilization of Particle Swarm Optimization Technique for Process Parameter Optimization in Electrical Discharge Machining, Nadeem Faisal and Kaushik Kumar, International Journal of Advanced Materials Manufacturing & Characterization, 2018, Vol. 8 (1), pp 58 – 68, ISSN: 2277-3886

2017

  1. Analysis Of Sheet Metal Forming of Interstitial-Free Steel and Extra-Deep-Drawing Steel Using ABACUS, Prakash Shanker Kumar, Prince Kumar Singh and Kaushik Kumar, International Journal of Advanced Materials Manufacturing & Characterization, 2017, Vol. 7 (2), pp 66 – 72, ISSN: 2277-3886

2016

  1. Effect of Geometry and Array of Cooling Holes in Film Cooling Over an Adiabatic Flat Plate – A Computational Approach, Madhurima Dey, Prakhar Jindal, Apurba Kumar Roy and Kaushik Kumar, REST Journal on Emerging trends in Modelling and Manufacturing, 2016 Vol.2(1), pp 10–20, ISSN: 2455-4537
  2. Buckling Analysis and Shape Optimization of Connecting Rod using FEA, Prakash Shanker Kumar and Kaushik Kumar, REST Journal on Emerging trends in Modelling and Manufacturing, 2016 Vol.2(2), pp 44–50, ISSN: 2455-4537.

2015

  1. Optimization of Tensile And Flexural Modulus of Silica Gel Reinforced Aluminium MMC by Using Taguchi Method, Anuj Dixit and Kaushik Kumar, International Journal of Research in Engineering and Technology, 2015 Vol. 04 Special Issue: 10, pp  39-43, DOI: 10.15623/ijret.2015.0422011, eISSN: 2319-1163 pISSN: 2321-7308
  2. Study of mechanical and tribological properties of ABS/ZnO polymer composites, J. Sudeepan, K. Kumar, T. K. Barman, and P. Sahoo, Advanced Materials Manufacturing & Characterization, 2015, Vol.5, Issue 1, pp. 125 – 135.
  3. Stress Analysis and Shape Optimization of Connecting Rod using Different Materials, Prakash Shanker Kumar and Kaushik Kumar, REST Journal on Emerging trends in Modelling and Manufacturing, 2015 Vol.1(2), pp 20–28, ISSN: 2455-4537

2014

  1. Quality standards for a software industry – A review, Monika Yadav & Kaushik Kumar, IOSR Journal of Computer Engineering, 16(2), 87-94, 2014, ISSN: 2278-0661.
  2. Analyzing the Conceptual Approach of ISO/IEC 15504 (Software Process Assessment) Model for Software industry, Monika Yadav & Kaushik Kumar, International Journal of Science, Technology and Engineering, 1(1), 26-30, 2014, ISSN: 2349-3046
  3. CMM or CMMI, which is more appropriate for a software industry?, Monika Yadav & Kaushik Kumar, International Journal in IT & Engineering, 2(1), 24 - 33, 2014, ISSN: 2348-0513.
  4. ISO 9000-3 OR CMM: which is more extensive for the quality systems in a software industry?, Monika Yadav & Kaushik Kumar, International Journal of Advanced Research in  Engineering and Applied Sciences, 3(1), 21 – 27, 2014, ISSN: 2278-6252
  5. Optimization of Machine Process Parameters on Overcut in EDM for EN19 Material using RSM, Shashikant, Apurba Kumar Roy & Kaushik Kumar, International Journal of Current Engineering and Technology, Special Issue-3, 50-53, 2014, ISSN: 2277-4106

2013

  1. Effect and optimization of machine process parameters on material removal rate in EDM for EN41 material using Taguchi, Vikas, Apurba Kumar Roy & Kaushik Kumar, International Journal of Mechanical Engineering and Computer Applications, 2013, 1(5), pp. 35-39, ISSN: 2320-6349.
  2. Design and Stress Analysis of a Mixed Flow Pump Impeller, Arunangsu Das, Apurba Kumar Roy & Kaushik Kumar, International Journal of Mechanical Engineering and Computer Applications, 2013, 1(5), pp 1–7, ISSN: 2320-6349.
  3. Efficacy of ISO 9000 standards conversely CMM for a software organization, Monika Yadav & Kaushik Kumar, International Journal of Management, Information Technology and Engineering, 2013, 1(2), pp 13-20, ISSN: 2348-0513
  4. Study of tribological properties of ABS / CaCO3 polymer composites using Taguchi method, J. Sudeepan, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, IOSR Journal of Mechanical and Civil Engineering, 2013, 6, pp 38 – 42, ISSN: 2278-1684.
  5. Optimization of WEDM process parameters on EN31steel by weighted principal component analysis, Milan Kumar Das, Kaushik Kumar, Tapan Kumar Barman & Prasanta Sahoo, IOSR Journal of Mechanical and Civil Engineering, 2013, 6, pp 30 – 33, ISSN: 2278-1684.
  6. Optimization of machine process parameters on material removal rate in EDM for EN19 material using RSM, Shashikant, Apurba Kumar Roy & Kaushik Kumar, IOSR Journal of Mechanical and Civil Engineering, 2013, 5, pp 24 – 28, ISSN: 2278-1684.
  7. Comparison of design validation of a mixed flow pump impeller blade using CATIA and ANSYS, Sambhrant Srivastava, Arunangsu Das, Apurba Kumar Roy & Kaushik Kumar, International Journal of Management and Technical Research, 2013, pp 1(1), 33 – 42, ISSN: 2347-9035.
  8. Deflection and stress analysis of a cantilever and its validation using ANSYS, Gargi Majumdar & Kaushik Kumar, International Journal of Mechanical Engineering and Research, 2013, 3(6), pp 655-662, ISSN 2249-0019.
  9. Deflection and stress analysis of a simply supported beam and its validation using ANSYS, Gargi Majumdar & Kaushik Kumar, International Journal of Mechanical Engineering and Computer Applications, 2013, 1(5), pp 17-20, ISSN 2320-6349.

2012

  1. Steps for Achieving ISO 17025 Accreditation in an Air Borne Target Test Range Establishment Laboratory, Kaushik Kumar & Sanjeev Kumar, International Journal of Engineering Research and Applications, 2012, 2 (3),  pp 987-990, ISSN : 2248-9622.
  2. Steps for implementation of 5S, Kaushik Kumar & Sanjeev Kumar, International Journals of Management, IT & Engineering, 2012, 2(6), pp 402 – 416, ISSN: 2249-0558.
  3. Development of documents for ISO 17025:2005 quality system for an air borne target test range establishment, Kaushik Kumar & Sanjeev Kumar, International Journal of Engineering Research and Industrial Applications, 2012, 5(II), pp 1 – 16, ISSN : 2248-9622.
  4. ISO 9001 or ISO 17025: which is more appropriate for an air borne target test range establishment laboratory, Kaushik Kumar & Sanjeev Kumar, International Journal of Management Studies, Statistics and Applied Economics, 2012, 2 (I), pp 95-106, ISSN 2250-0367.

International Conference Publications (21)

2018

  1. Adiabatic Film Cooling Effectiveness over a Flat Plate: A Computational Approach, Proceedings of 2nd International Conference on Emerging Trends in Mechanical Engineering, March, 2018, Bhopal
  2. Optimization of Forced Convection Heat Transfer in a Twin Cylinder System Under Static Condition, Proceedings of 2nd International Conference on Emerging Trends in Mechanical Engineering, March, 2018, Bhopal

2015

  1. Optimization of Material Removal Rate in electrochemical machining of EN19 Material Using Taguchi Method, Proceedings of the International Conference on Advances in Materials and Materials Processing (AMMP – ’15), January 2015, Coimbatore.
  2. Study of Mechanical Properties of Silica Gel Reinforced Aluminium Metal Matrix Composite, Proceedings of the International Conference on Advances in Materials and Materials Processing (AMMP – ’15), January 2015, Coimbatore.
  3. Optimization and Prediction of Overcut in Die Sinking Electro Discharge Machining of EN45 Steel Tool, Proceedings of the International Conference on Advances in Materials and Materials Processing (AMMP – ’15), January 2015, Coimbatore.

2014

  1. Effectiveness of ISO 9000 family of Standards for a Software Organization, Proceedings of Second International Conference on Advances In Industrial Engineering Applications (ICAIEA 2014), Chennai, January 2014.
  2. Design and FEM Analysis of a Mixed Flow Pump Impeller, Proceedings of IC MEETS – 2014, Bhopal, January 2014.
  3. Modeling and Analysis of Process Parameters on Surface Roughness in EDM of EN 31 Tool Steel by RSM Approach, Proceeding of International Conference on Mechanical Engineering 2013 (Bangladesh), June2014.
  4. Study of tribological and mechanical properties of compression molded ABS / ZnO composites, Proceeding of International Conference on Mechanical Engineering 2013 (Bangladesh), June 2014.
  5. Optimization of MRR in ECM of EN31 Tool Steel Using Taguchi Method, Proceedings of International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2014) December 2014, Kolaghat.
  6. Optimization of Mechanical Properties of Wood Dust-reinforced Epoxy Composite Using Grey Relational Analysis, Proceedings of Fourth International Conference on Soft Computing for Problem Solving, Advances in Intelligent Systems and Computing 2015, December 2014, NIT Silchar.

2013

  1. Study of tribological and mechanical properties of ABS / CaCO3 composites, International Conference on Recent Advances in Composite Materials (ICRACM-2013), Goa, February 2013. 
  2. Study of tribological and mechanical properties of compression molded ABS-TiO2 composites, International Conference on Advancements in Polymeric Materials Innovation in Materials and Product Development, (APM2013), Lucknow, March, 2013. 
  3. Comparative studies on tribological and mechanical properties of ABS-CaCO3 and ABS-TiO2 composites, International Conference on Advanced Manufacturing and Automation (INCAMA-2013), Madurai, March, 2013. 

2012

  1. Optimization of Surface Roughness in EDM of EN31 Tool Steel Using Taguchi Method, Proceedings of 8th International Conference on Industrial Tribology, Pune December, 2012
  2. Surface Roughness Modeling in Wire Electrical Discharge Machining (WEDM) Using Response Surface Methodology, Proceedings of International Conference on Advances in Mechanical Engineering and its Interdisciplinary Areas (ICAMEI-2012), Kolaghat December 2012.
  3. Design of a mixed flow pump impeller and its validation using CATIA, International Conference of Engineering and Management Sciences (ICEMS 2013), NCR, December 2013
  4. ISO 9000 for a software organization, 2013, International Conference of Engineering and Management Sciences (ICEMS 2013), NCR, December 2013.
  5. Effect and Optimization of Machine Process Parameters on Overcut in EDM for EN41 materials using Taguchi, Proceedings of Advances in Engineering and Technology (AET 2013), NCR, December 2013.

2007

  1. Virtual manufacturing of helical gears with chip formation, Proceedings of ECHDEM 2007, Satyabhama University, Chennai, November, 2007.
  2. Virtual manufacturing of spur gears with chip formation, Proceedings of International Conference on Advanced Manufacturing Technology 2007 (ICAMT 2007), CMERI Durgapur, November, 2007.

National Conference Publications (1)

  1. Modelling and analysis of process parameters on MRR in EDM of EN31 Tool steel using response surface methodology, Proceedings National Conference on Advances in Simulation and Optimization Techniques in Mechanical Engineering (NASOME-2012), Bhubaneswar, 18-19 February.
Member of Professional Bodies
  1. Life Member of Indian Carbon Society, New Delhi (LM – 617)
Current Sponsored Projects

CONSULTANCY PROJECT

Project (under Industry Institute relationship) undertaken for Amiantit Oman, MUSCAT (a company at MUSCAT, Sultanate of Oman manufacturing plastic products). The project was for existing design validation, design modification and its validation using ANSYS for their product ‘MANHOLE’

SPONSORED PROJECT (RECEIVED)

  • Principal Investigator of the project titled “Role of Hybrid Nanofillers on The Physio-Mechanical and Tribological Behaviour of Polymer Nanocomposites for Load Bearing Advanced Mechanical Component Applications (DST under SERB CRG, New Delhi, India) (45.84L)
  • Co-investigator of the project titled “Bobbin Tool Friction Stir Welding of Aluminium to Copper (Received under CRS from MHRD under TEQIP III, New Delhi, India) (10.67L)

SPONSORED PROJECT (APPLIED)

  • Co-investigator of the project titled “Development of toughened epoxy cryo-compatible resin system (Applied to ISRO, India) (44.93L)
Text and Reference Books

PUBLICATIONS

BOOKS (56)

AUTHORED BOOKS PUBLISHED (29)

International Publisher

2025

  1. Kumar, K. and Ranjan, C., Writing Skills for Scientific Communication, CRC Press (A Taylor & Francis Company), INDIA (e ISBN: 978–1–003–48582–7)

2024

  1. Kumar, K., Ranjan, C., Smart Materials – Electro-Rheological Fluids, Piezoelectric Smart Materials, Shape – Memory Alloys, Verlag Walter de Gruyter GmbH, GERMANY. (ISBN 978-3111379012), (https://www.degruyter.com/document/isbn/9783111379623/html)

2023

  1. Kumar, K. and Zindani, D. Engineering Material Characterizations, Verlag Walter de Gruyter GmbH, GERMANY. (ISBN 978–3–110–99759–0), (https://www.degruyter.com/document/isbn/9783110997590/html)   

2021

  1. Kumar, K., Ranjan, C. and Davim, J. P., Understanding CATIA – Through Tutorials, (Catalogue No. # K367807, ISBN 978–0–367–48794–2), CRC Press (A Taylor & Francis Company), USA (https://www.routledge.com/Understanding-CATIA-A-Tutorial-Approach/Kumar-Ranjan-Davim/p/book/9780367487942)

2020

  1. Kumar, K. Zindani, D. and Davim, J. P., Rapid Prototyping, Rapid Tooling and Reverse Engineering - From Biological Models to 3D Bio-Printers, (ISBN 978–3–11–066324–2), Verlag Walter de Gruyter GmbH, GERMANY. (https://www.degruyter.com/view/title/558463?language=en)
  2. Kumar, K., Zindani, D. and Davim, J. P., Mastering SOLIDWORKS—Through Examples, (ISBN 978–3–03–038900–0), Springer Nature Singapore Pte Ltd, Singapore (https://www.springer.com/gp/book/9783030389000)
  3. Kumar, K., Ranjan, C. and Davim, J. P., CNC Programming for Machining – An Introduction, (ISBN 978–3–030–41278–4) Springer Nature Singapore Pte Ltd, Singapore (https://www.springer.com/gp/book/9783030412784)

2019

  1. Kumar, K. Roy, S. and Davim, J. P., Soft Computing Techniques for Engineering Optimization, (Taylor & Francis Catalogue #K413022; ISBN 978–0–367–14861–4) CRC Press (A Taylor & Francis Company), USA (https://www.routledge.com/Soft-Computing-Techniques-for-Engineering-Optimization/Kumar-Roy-Davim/p/book/9780367148614)
  2. Kumar, K., Zindani, D. and Davim, J. P., Industry 4.0 - Developments towards the Fourth Industrial Revolution, (ISBN 978–981–13–8164–5), Springer Nature Singapore Pte Ltd, Singapore (https://www.springer.com/gp/book/9789811381645)
  3. Kumar, K., Kalita, H., Zindani, D. and Davim, J. P., Materials and Manufacturing Processes, (ISBN 978–3–030–21065–6), Springer Nature Singapore Pte Ltd, Singapore (https://link.springer.com/book/10.1007/978-3-030-21066-3)
  4. Kumar, K., Zindani, D. and Davim, J. P., Optimizing Engineering Problems through Heuristic Techniques, (Catalogue No. # K349318, ISBN 978–1–138–48536–5) CRC Press (A Taylor & Francis Company), USA (https://www.routledge.com/Optimizing-Engineering-Problems-through-Heuristic-Techniques/Kumar-Zindani-Davim/p/book/9781138485365)

2018

  1. Kumar, K., Zindani, D. and Davim, J. P., Advanced Machining and Manufacturing Processes (ISBN 978-3-319-76074-2), Springer International Publishing AG, Switzerland (https://www.springer.com/gp/book/9783319760742)

BOOKS UNDER SUBMISSION (1)

  1. Kumar, K., Ranjan, C., Advances in Coating Technologies, Verlag Walter de Gruyter GmbH, GERMANY. (ISBN 978-3111379012)

National Publisher

2024

  1. Ranjan, C., Jha, S. K. and Kumar, K. Computer Applications in Design CAD/CAM: With Modeling & Analysis Software (ISBN 978–93–58708–00–4), S. Chand and Company Limited, New Delhi, INDIA (https://www.schandpublishing.com/books/tech-professional/computer-science/computer-applications-design-cadcam-with-modelling-analysis-software/9789358708004/)
  2. Ranjan, C. and Kumar, K., Robotics (ISBN 978–93–58706–16–1), S. Chand and Company Limited, New Delhi, INDIA (https://www.schandpublishing.com/books/tech-professional/computer-science/robotics-students-btech-be-bsc-engg-aicte-pattern/9789358706161/)

2020

  1. Kumar, K., Roy, A. K. and Dash, N., Material Science and Engineering (ISBN 978–93–89583–08–3), Wiley (I), New Delhi, INDIA (https://www.wileyindia.com/materials-science-and-engineering-3.html)
  2. Kumar, K., Roy, A. K. and Kumari, N., Understanding CREO Parametric Through Examples (ISBN 978–93–89583–13–7), Wiley (I), New Delhi, INDIA (https://www.wileyindia.com/understanding-creo-parametric-through-examples.html)
  3. Kumar, K., Zindani, D., Industrial Engineering and Management (ISBN 978–93–89633–19–1), Wiley (I), New Delhi, INDIA (https://www.wileyindia.com/industrial-engineering-and-management.html)
  4. Kumar, K., Roy, A. K. and Debta, S., Basic Mechanical Engineering (ISBN 978–93–89583–91–5), Wiley (I), New Delhi, INDIA (https://www.wileyindia.com/basic-mechanical-engineering-2.html)
  5. Zindani, D., Roy, A. K. and Kumar, K. 2016. Working with ANSYS – A Tutorial Approach (ISBN 978–93–89698–65–7), Wiley (I), New Delhi, INDIA (https://www.wileyindia.com/working-with-ansys-a-tutorial-approach.html)

 

2019

  1. Kumar, K. and Kalita, H., Workshop Practices (ISBN 978–93–5338–741–0), Vikas Publishing House Private Limited, New Delhi, INDIA (https://www.vikaspublishing.com/books/engineering/mechanical-engineering/workshopmanufacturing-practices/9789353387419/)
  2. Kumar, K., Zindani, D., Industrial Engineering and Management (ISBN 978–93–86768–50–6), I.K. International Publishing House Pvt. Ltd., New Delhi, INDIA (https://www.ikbooks.com/books/book/engineering-computer-science/industrial-engineering-management/9789386768506/)

2018

  1. Kumar, K., Roy, A. K. and Dash, N., Material Science and Engineering (ISBN 978–93–85909–64–1), I.K. International Publishing House Pvt. Ltd., New Delhi, INDIA (https://www.ikbooks.com/books/book/engineering-computer-science/mechanical-production-industrial-engineering/materials-science-engineering/9789385909641/)
  2. Kumar, K., Roy, A. K. and Kumari, N., Understanding CREO Parametric Through Examples (ISBN 978–93–85909–82–5), I.K. International Publishing House Pvt. Ltd., New Delhi, INDIA (https://www.ikbooks.com/books/book/engineering-computer-science/mechanical-production-industrial-engineering/understanding-creo-parametric-through-examples/9789386768049/)
  3. Kumar, K., Roy, A. K. and Ranjan, C., Engineering Graphics and Design, (ISBN 978–93–52718–72–6) Vikas Publishing House Private Limited, New Delhi, INDIA (https://www.vikaspublishing.com/books/engineering/mechanical-engineering/engineering-graphics-design-with-demonstrations-autocad-catia-ansys/9789352718726/)
  4. Kumar, K., Roy, A. K. and Ranjan, C., Engineering Graphics (For JNTU, Hyderabad), (ISBN 978–93–52718–88–7) Vikas Publishing House Private Limited, New Delhi, INDIA.

2017

  1. Kumar, K., Roy, A. K. and Debta, S., Basic Mechanical Engineering (ISBN 978–93–85909–68–9), I.K. International Publishing House Pvt. Ltd., New Delhi, INDIA (https://www.ikbooks.com/books/book/engineering-computer-science/mechanical-production-industrial-engineering/basic-mechanical-engineering/9789385909689/)

2016

  1. Zindani, D., Roy, A. K. and Kumar, K. 2016. Working with ANSYS – A Tutorial Approach (ISBN 978–93–85909–26–9), I.K. International Publishing House Pvt. Ltd., New Delhi, INDIA (https://www.ikbooks.com/books/book/engineering-computer-science/mechanical-production-industrial-engineering/working-with-ansys-tutorial-approach/9789385909269/)
  2. Kumar, K. and Roy, S. 2016. Total Quality Management (ISBN 978–81–80142–34–5), Standard Publishers Distributors, New Delhi, INDIA.

EDITED BOOK PUBLISHED (29)

International Publisher

2024

  1. Kumar, K. Advances in Industrial Engineering in the Industry 4.0 Era, (ISBN 978–1–03–253782–5) CRC Press (A Taylor & Francis Company), INDIA. (https://www.routledge.com/Advances-in-Industrial-Engineering-in-the-Industry-40-Era/Kumar/p/book/9781032537825)

2022

  1. Kumar, K. and Sridhar Babu, B., Hybrid Composites: Processing, Characterization and Applications, (ISBN 978–3–11–072468–4) Verlag Walter de Gruyter GmbH, GERMANY (https://www.degruyter.com/document/isbn/9783110724684/html)  
  2. Kumar, K. and Sridhar Babu, B., Industrial Automation and Robotics, (ISBN 978–0–36–748797–3) CRC Press (A Taylor & Francis Company), USA. (https://www.routledge.com/Industrial-Automation-and-Robotics-Techniques-and-Applications/Kumar-Babu/p/book/9780367487973)
  3. Kumar, K., Engineering Pedagogy towards Outcome Based Education, (ISBN 978–0–36–753743–2) CRC Press (A Taylor & Francis Company), USA (https://www.routledge.com/Engineering-Pedagogy-Towards-Outcome-Based-Education/Kumar/p/book/9780367537432)
  4. Kumar, K. and Kurni, M., Design Thinking: A Forefront Insight, (ISBN 978–1–03–203905–3), CRC Press (A Taylor & Francis Company), USA (https://www.routledge.com/Design-Thinking-A-Forefront-Insight/Kumar-Kurni/p/book/9781032039053).
  5. Kumar, K., Kakandikar, G., B. and Davim, J. P., Computational Intelligence in Manufacturing, (ISBN: 978–0–32–391854–1) Elsevier Inc. USA (https://www.elsevier.com/books/computational-intelligence-in-manufacturing/kumar/978-0-323-91854-1)
  6. Kumar, K., Sridhar Babu, B. and Davim, J. P., Light Weight Materials: Processing and Characterization, (ISBN: 978–1–78–630797–2) ISTE Science Publishing Ltd. UK. (http://iste.co.uk/book.php?id=1810)

2021

  1. Kumar, K., Sridhar Babu, B. and Davim, J. P., Advancements in the Processing, Characterization, and Application of Lightweight Materials, IGI Global, USA (https://www.igi-global.com/book/handbook-research-advancements-processing-characterization/266361)
  2. Kumar, K., Zindani D. and Davim, J. P., Artificial Intelligence in Mechanical and Industrial Engineering (Under book series Artificial Intelligence in Engineering), CRC Press (A Taylor & Francis Company), USA (https://www.routledge.com/Artificial-Intelligence-in-Mechanical-and-Industrial-Engineering/Kumar-Zindani-Davim/p/book/9780367441760)
  3. Sridhar Babu, B. and Kumar, K., Nanomaterials and Nanocomposites: Characterization: Processing, and Applications (Under book series Engineering Materials) (Catalogue #364177; ISBN: 978-0-367-48389-0, CRC Press (A Taylor & Francis Company), USA (https://www.routledge.com/Nanomaterials-and-Nanocomposites-Characterization-Processing-and-Applications/Babu-Kumar/p/book/9780367483890)
  4. Kumar, K., Sridhar Babu, B. and Davim, J. P., Coatings – Materials, Processes, Characterization and Optimization (Under book series Materials Forming, Machining and Tribology) (978–3–030–62162–9), Springer Nature, Germany (https://www.springer.com/gp/book/9783030621629)
  5. Kumar, K., and Davim, J. P., Plant and Animal Based Composites, (Under book series Advanced Composites), (ISBN: 978–3–11–069521–2) Verlag Walter de Gruyter GmbH, GERMANY (http://www.degruyter.com/books/978-3-11-069521-2)
  6. Kumar, K., Zindani D. and Davim, J. P., Sustainable Manufacturing and Design, (ISBN: 978–0–12–822124–2) Elsevier Inc. USA (https://www.elsevier.com/books/sustainable-manufacturing-and-design/kumar/978-0-12-822124-2)

2020

  1. Kumar, K. and Davim, J. P., Engineering and Technological Pedagogy – Methodology and Outcome, (ISBN: 978–1–79–982245–5) IGI GLOBAL, USA (https://www.igi-global.com/book/methodologies-outcomes-engineering-technological-pedagogy/235720)
  2. Kumar, K. and Davim, J. P., Polymers and Composites Manufacturing (Under book series Advanced Composites), (ISBN: 978–3–11–065193–5) Verlag Walter de Gruyter GmbH, GERMANY (https://www.degruyter.com/view/title/554135?language=en)
  3. Kumar, K. and Davim, J. P., Supply Chain Intelligence: Application and Optimization (Under book series Management and Industrial Engineering) (ISBN: 978–3–030–46425–7), Springer Nature, Germany (https://www.springer.com/gp/book/9783030464240)
  4. Kumar, K. and Davim, J. P., Modern Manufacturing Processes, (ISBN: 978–0–12–819496– 6) Elsevier Inc. USA (https://www.elsevier.com/books/modern-manufacturing-processes/kumar/978-0-12-819496-6)

2019

  1. Kumar, K., Davim, J. P., Design, Development and Optimization of Bio-Mechatronic Engineering Products (Under book series Advances in Bioinformatics and Biomedical Engineering (ABBE), (ISBN 978–1–52–258235–9), International Publisher of Progressive Information Science and Technology Research, USA (https://www.igi-global.com/book/design-development-optimization-bio-mechatronic/216515)
  2. Kumar, K. and Davim, J. P., Biodegradable Composites – Materials, Manufacturing and Engineering (Under book series Advanced Composites), (ISBN 978–3–11–060369–9), Verlag Walter de Gruyter GmbH, GERMANY (https://www.degruyter.com/view/title/538092)
  3. Kumar, K., Zindani, D. and Davim, J. P., Sustainable Engineering Products and Manufacturing Technologies, (ISBN: 978–0–128–16564–5) Elsevier Inc. USA. (https://www.elsevier.com/books/sustainable-engineering-products-and-manufacturing-technologies/kumar/978-0-12-816564-5)
  4. Kumar, K., Zindani, D. and Davim, J. P., Digital Manufacturing and Assembly Systems in Industry 4.0 (Under Book Series Science, Technology, and Management), (ISBN: 978–1–138–61272–3), CRC Press (A Taylor & Francis Company), USA (https://www.routledge.com/Digital-Manufacturing-and-Assembly-Systems-in-Industry-40/Kumar-Zindani-Davim/p/book/9780367779474)   
  5. Kumar, K., Zindani, D. and Davim, J. P., Additive Manufacturing Technologies from an Optimization Perspective, (Under Book Series Advances in Logistics, Operations, and Management Science (ALOMS)), (ISBN: 978–1–522–59167–2), International Publisher of Progressive Information Science and Technology Research, USA (https://www.igi-global.com/book/additive-manufacturing-technologies-optimization-perspective/219365)  
  6. Kumar, K., and Davim, J. P., Optimization using Evolutionary Algorithms and Metaheuristics: Applications in Engineering (Under Book Series Science, Technology, and Management), (ISBN: 978-0-367-26044-6), CRC Press (A Taylor & Francis Company), USA (https://www.routledge.com/Optimization-Using-Evolutionary-Algorithms-and-Metaheuristics-Applications/Kumar-Davim/p/book/9780367260446)
  7. Kumar, K. and Davim, J. P., Optimization for Engineering Problems, (ISBN: 978–1–786–30474–2), ISTE Science Publishing Ltd. UK. (http://www.iste.co.uk/book.php?id=1513)

2018

  1. Kumar, K., Davim, J. P., Design and Optimization of Engineering Products (Under book series Advances in Mechatronics and Mechanical Engineering (AMME)) (ISBN 978–15–22534–01–3), International Publisher of Progressive Information Science and Technology Research, USA (https://www.igi-global.com/book/design-optimization-mechanical-engineering-products/180658)
  2. Kumar, K., Davim, J. P., Hierarchical Composite Materials (Under book series Advanced Composites) (ISBN 978–31–10544–02–2), Verlag Walter de Gruyter GmbH, GERMANY (https://www.degruyter.com/view/title/528985?language=en)
  3. Kumar, K., Davim, J. P., Composites and Advanced Materials for Industrial Applications (Under book series Advances in Chemical and Materials Engineering (ACME) (ISBN 978–15–22552–16–1), International Publisher of Progressive Information Science and Technology Research, USA (https://www.igi-global.com/book/composites-advanced-materials-industrial-applications/187124)
  4. Kumar, K., Kumari, N. and Davim, J. P., Non-Conventional Machining in Modern Manufacturing Systems, (Under book series Advances in Mechatronics and Mechanical Engineering (AMME)), (ISBN 978–15–22561–61–3), International Publisher of Progressive Information Science and Technology Research, USA (https://www.igi-global.com/book/non-conventional-machining-modern-manufacturing/197445)
  5. Kumar, K., Zindani, D., Kumari, N. and Davim, J. P., Micro and Nano Machining of Engineering Materials – Recent Developments (Under book series Materials Forming, Machining and Tribology), (ISBN 978–3–319–99900–5), Springer Nature, Germany (https://www.springer.com/gp/book/9783319998992)

SERIES EDITOR

  1. Engineering Optimization for Cambridge Scholars Publishing, UK.
  2. Artificial Intelligence (AI) in Engineering for CRC Press (A Taylor & Francis Company), USA
  3. Engineering Materials for CRC Press (A Taylor & Francis Company), USA
  4. Maritime Engineering: Science, Technology, and Applications for CRC Press (A Taylor & Francis Company), USA

GUEST EDITOR

  1. Proceedings of the 3rd International Conference on Multifunctional Materials (ICMM-2024), AIP Proceedings (Scopus Indexed)
  2. Proceedings of the 2nd International Conference on Multifunctional Materials (ICMM-2022), Materials Today – Proceedings (Scopus and CPCI Indexed)
  3. ‘International Journal of Integrated Engineering (IJIE)’ Special Issue: 4th International Conference on Manufacturing, Material Science and Engineering 2022 (ICMMSE 2022) (SCIE Indexed)
  4. Proceedings of the 4th International Conference on Manufacturing, Material Science and Engineering 2022 (ICMMSE 2022), AIP Proceedings (Scopus Indexed)
  5. ‘Advances in Materials Science and Engineering’ Special Issue: Processing, Characterization, and Applications of Lightweight Materials 2023, Hindawi (SCIE Indexed)
  6. Proceedings of the International Conference on Sustainable Material Science, Structures and Manufacturing" (ICSMSM 2022), AIP Proceedings (Scopus Indexed)
  7. Proceedings of the International Conference on Thermo-Fluids and System Design (ICTFSD 2022), Materials Today – Proceedings (Scopus and CPCI Indexed)
  8. Proceedings of the International Conference on Thermo-Fluids and System Design (ICTFSD 2022), AIP Proceedings (Scopus Indexed)
  9. Proceedings of the 1st International Conference on Advances in Material Science, Mechanical and Civil Engineering (ICAMSMCE 2022), AIP Proceedings (Scopus Indexed)
  10. ‘Advances in Materials Science and Engineering’ Special Issue: Processing, Characterization, and Applications of Lightweight Materials 2022, Hindawi (SCIE Indexed)
  11. ‘Advances in Materials Processing and Techniques’ a Topical Collection of SN Applied Sciences 2021, Springer Nature (ESCI Indexed)
  12. Proceedings of 3rd International Conference on Manufacturing, Material Science and Engineering (ICMMSE 2021), AIP Proceedings (Scopus Indexed)
  13. Proceedings of International Conference on Research and Advances in Mechanical Engineering (ICRAME 2020), IOP Conference Series: Materials Science and Engineering.
  14. Proceedings of 2nd International Conference on Manufacturing, Material Science and Engineering (ICMMSE 2020), Materials Today – Proceedings (Scopus and CPCI Indexed).
  15. Proceedings of 2nd International Conference on Manufacturing, Material Science and Engineering (ICMMSE 2020), AIP Proceedings (Scopus Indexed)
  16. Proceedings of 1st International Conference on Manufacturing, Material Science and Engineering (ICMMSE'19), Materials Today – Proceedings (Scopus and CPCI Indexed).
  17. Proceedings of 1st International Conference on Manufacturing, Material Science and Engineering (ICMMSE'19), AIP Proceedings (Scopus Indexed)
  18. Proceedings of 9th International Conference on Materials Processing and Characterization - 2019 (ICMPC'19), Materials Today – Proceedings (Scopus and CPCI Indexed).

BOOK CHAPTERS (92)

All Book Chapters are Scopus Indexed­

2025

  1. Ranjan, C., Balaji, P.S., and Kumar, K., Advancements in Computer Vision for Autonomous Drone Navigation: Techniques and Applications. In eds. Shah, I. A. and Jhanjhi, N. Computer Vision and Edge Computing Technologies for the Drone Industry, IGI Global USA. (Under Review)
  2. Ranjan, C., and Kumar, K., Quadrotor Control Systems: A Theoretical and Experimental Perspective In ed. Mellal, M. A. Innovations and Developments in Unmanned Aerial Vehicles, IGI Global USA. (Under Review)
  3. Singh, R. K., Tiwari, S. K., Ranjan, C. and Kumar, K. Practical Applications of Supply Chain Analytics in Agriculture. In eds. Srivastava, P., Mall, R. K., Pradhan, B. and Pandey, M. K. Big Data Analytics in Agriculture: Algorithms and Applications, Academic Press Inc (Under Review)
  4. Ranjan, C., and Kumar, K. Innovations in Autonomous Drones for Precision Agriculture Techniques and Applications. In eds Bora, D. and Bania, R. Computer Vision Techniques for Agricultural Advancements, IGI Global USA. (Accepted)
  5. Ranjan, C. and Kumar, K., Precision Agriculture: Leveraging Artificial Intelligence and Drones for Eco-Friendly Farming. In eds. Tariq, M. U. Cases on AI-Driven Solutions to Environmental Challenges, IGI Global USA. (Accepted)
  6. Singh, R. K., Tiwari, S. K. and Kumar, K., Multi-Product CONWIP System Performance Analysis: Modeling and Analysis. In eds. Chiwaridzo, O. and Dzingirai, M. Repositioning in Times of Corporate Crisis: Green Management and Technology Adoption, IGI Global USA. (Accepted)
  7. Ranjan, C., Roy, A. K. and Kumar, K. Application of Artificial Intelligence in Wind Energy Generation. In ed. Roy, Paul, C. Next Generation Artificial Intelligence Driven Smart and Renewable Energy CRC Press Inc (Accepted)

2024

  1. Ranjan, C. and Kumar, K., Crafting a Comprehensive Research Proposal: A Guide for Academicians in Higher Education. In ed. Mdikana, A. Enhancing Research for Academicians in Higher Education, IGI Global USA. https://doi.org/10.4018/979-8-3373-0806-7.ch010
  2. Ranjan, C., Chakraborty, B., Srinivas, J. and Kumar, K., Ethical Considerations in Privacy-Preserving Industrial Security: of Cognitive Internet of Things Enabled Drones, In eds. Garg, A., Al-Turjman, F., Khan, S. Innovations in Blockchain-Powered Intelligence and Cognitive Internet of Things (CIoT), IGI Global USA. https://doi.org/10.4018/979-8-3693-2157-7.ch002
  3. Singh, R. K., Tiwari, S. K. and Kumar, K. Optimizing Ordering Policies for Bullwhip Effect Mitigation in a Simple Supply Chain: within the Framework of Industry 6.0, In eds. Sharma, A., Moses, O., Sharma, R. B. and Gupta, S. Sustainable Innovation for Industry 6.0, IGI Global USA. https://doi.org/10.4018/979-8-3693-3140-8.ch009
  4. Ranjan, C., Srinivas, J. and Kumar, K., Transformation from Robots to COBOTS: A Journey towards Sustainable Manufacturing, In eds. Singh, S., Gupta, S. and Jagtap, S., Emerging Technologies for Sustainable Manufacturing, IGI Global USA. https://doi.org/10.4018/979-8-3693-1862-1.ch013.  
  5. Roy, A. K. and Kumar, K., Performance Evaluation of a Low Head Hydraulic Air Compressor: A Prospective Source of Renewable and Green Energy, In Hazra, S., Sultana, S. and Roy, P. eds. Optimization Techniques for Hybrid Power Systems: Renewable Energy, Electric Vehicles, and Smart Grid, IGI Global USA. https://doi.org/10.4018/979-8-3693-0492-1.ch009.
  6. Ranjan, C., Chakraborty, B., Srinivas, J. and Kumar, K., Drone Swarms in Industry 5.0, In eds. Singh, C. and Gatti, R. R. Drone Applications for Industry 5.0, IGI Global USA. https://doi.org/10.4018/979-8-3693-2093-8.ch003   
  7. Ranjan, C., Singh, R. and Kumar, K., Efficient Machining Strategies for Polymer Matrix Composites, In Cabrera, F. M. and Hanafi, I. eds. Machining Polymer Matrix Composites: Tools, Techniques, and Sustainability, pp 117–144 IGI Global USA. https://10.4018/978-1-6684-9927-6.ch005.
  8. Ranjan, C. Kumar, K., Revolutionizing Industrial Engineering: Exploring Additive Manufacturing Technologies in the Era of Industry 4.0, In Kumar, K. ed. Advances in Industrial Engineering in the Industry 4.0 Era, CRC Press https://doi.org/10.1201/9781003486244-10    

2023

  1. Apoorv, S., Shankar, A., Chatterjee, S., Acherjee, B. and Kumar, K., Solving Multiple Traveling Salesmen Problem using Prim’s and Dijkstra’s Algorithms: A Case Study on Emergency Medical Supplies, In Gandomi A. H. and Kulkarni, A. J., Handbook of Formal Optimization Methods, Springer https://doi.org/10.1007/978-981-19-8851-6_26-1
  2. Kumari, A., Acherjee, B. and Kumar, K., Gear Material Selection using an Integrated PSI-MOORA Method, In Gandomi A. H. and Kulkarni, A. J., Handbook of Formal Optimization Methods, Springer https://doi.org/10.1007/978-981-19-8851-6_23-1
  3. Kumar, R. and Kumar, K., Multi Response Optimization on Process Parameters of WEDM for Ti-6Al-4V Alloy Using Grey Relational Approach, In Kulkarni, A. J., Optimization Methods for Product and System Design, Springer. https://doi.org/10.1007/978-981-99-1521-7_2 pp 29 - 52
  4. Kumar, R., Mishra, S.K., Kumar, K. A Critical Review on Finite Element Models Towards Physico-Mechanical Properties of Bamboo Fibre/Filler-Reinforced Composite Materials. In Palombini, F.L., Nogueira, F.M. (eds) Bamboo and Sustainable Construction. Environmental Footprints and Eco-design of Products and Processes. Springer, Singapore. pp. 241–261. https://doi.org/10.1007/978-981-99-0232-3_9 pp 241–261

2022

  1. Dash, N., Debta, S. and Kumar, K., Application of Artificial Neural Network and Particle Swarm Optimization for Optimization in Advanced Manufacturing – A Case with CNC Lathe. I. (Ed.). Research Anthology on Artificial Neural Network Applications. IGI Global USA. pp. 804 – 823. https://doi.org/10.4018/978-1-6684-2408-7.ch037.
  2. Kumar, K. and Davim, J.P., Identification of Optimal Process Parameters in Electro-Discharge Machining Using ANN and PSO. I. (Ed.). Research Anthology on Artificial Neural Network Applications. IGI Global USA. pp. 824 – 842. https://doi.org/10.4018/978-1-6684-2408-7.ch038.
  3. Kumar, R., Ranjan, C. and Kumar, K., Investigation of Mechanical Properties of Rice Straws and Rice Husk Reinforced Hybrid Polymeric Composite, In Kumar, K. and Sridhar Babu, B. (eds) Hybrid Composites: Processing, Characterization and Applications, De Gruyter, Germany pp. 59–79. https://doi.org/10.1515/9783110724684-004   
  4. Kumari, N. and Kumar, K., Investigations of mechanical properties of a hybrid nanocomposite for the development of lower body orthotic callipers, In Kumar, K. and Sridhar Babu, B. (eds) Hybrid Composites: Processing, Characterization and Applications, De Gruyter, Germany pp. 105–118. https://doi.org/10.1515/9783110724684-006
  5. Kumar, R. and Kumar, K., Development of Forward Kinematics of a Two-DOF Manipulator in MATLAB Environment, In Kumar, K. and Sridhar Babu, B. (eds) Industrial Automation and Robotics: Techniques and Applications, CRC Press, USA. pp. 87–109. http://doi.org/10.1201/9781003121640-8  
  6. Kumar, R. and Kumar, K. Pedagogy Towards Outcome-Based Engineering Education – The State of Art, In K. Kumar (ed) Engineering Pedagogy Towards Outcome-Based Education, CRC Press, USA. pp. 3–21. http://doi.org/10.1201/9781003083160-2  
  7. Kumar, R. and Kumar, K., Design Thinking - Innovation Approaches and Challenges Towards Product Design, In Kumar, K. and Kurni, M. (eds) Design Thinking: A Forefront Insight, CRC Press, USA. pp. 41 – 63. https://doi.org/10.1201/9781003189923-5  
  8. Kalita, H. and Kumar, K., Industrial Internet of Things in Manufacturing. In: Gajrani, K.  K., Prasad, A. and Kumar, A. (eds) Advances in Sustainable Machining and Manufacturing Processes. CRC Press, USA. pp. 251 – 262. https://doi.org/10.1201/9781003284574-17   
  9. Kalita, H., Kumar, K., and Davim, J.P., Machine Learning Applications for the Tensile Property Evaluation of Steel: An Overview. In: Hussain C.M., Di Sia P. (eds) Handbook of Smart Materials, Technologies, and Devices. Springer, Cham. https://doi.org/10.1007/978-3-030-58675-1_64-1

2021

  1. Singh, S., Zindani, D., Roy, A. K., & Kumar, K. Application of Renewable Energy System with Fuzzy Logic. I. (Ed.). Research Anthology on Clean Energy Management and Solutions (3 Volumes). IGI Global USA. pp. 1007-1032. https://doi.org/10.4018/978-1-7998-9152-9.ch043
  2. Kumar, R. and Kumar, K. Intelligence-Assisted COBOTS in Smart Manufacturing. Kumar, A., Gori, Y., Dutt, N., Singla, Y. K. and Kumar, A. M. Eds, Advanced Computational Methods in Mechanical and Materials Engineering, CRC Press, USA. pp. 19 – 41. https://doi.org/10.1201/9781003202233-3
  3. Kalita, H., Kumar, K. and Davim, J. P. An Overview of Machine Learning Implementation in Various Industrial Scenarios- Agriculture, Healthcare and Enterprise, Kumar, K., Zindani D. and Davim, J. P. Eds, Artificial Intelligence in Mechanical and Industrial Engineering, CRC Press, USA. pp. 3 – 20. https://doi.org/10.1201/9781003011248-1 
  4. Kumar, R. and Kumar, K. Intelligent Control Design Schemes of a Two-Link Robotic Manipulator. Kumar, K., Zindani D. and Davim, J. P. Eds, Artificial Intelligence in Mechanical and Industrial Engineering, CRC Press, USA. pp. 65 – 86. https://doi.org/10.1201/9781003011248-5   
  5. Faisal, N. and Kumar, K., Recycling & Reuse of Building Materials from Construction and Demolition: An Environmental Evaluation for Sustainable Growth and Development. IGI Global Research Anthology titled Research Anthology on Environmental and Societal Well-Being Considerations in Buildings and Architecture, IGI Global USA. pp. 460 – 475 https://doi.org/10.4018/978-1-7998-9032-4.ch022.   
  6. Bhuyan, D. and Kumar, K. A Brief History of Prosthetics and Orthotics of the Lower Body and Their Types, IGI Global Research Anthology titled Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement, IGI Global USA. pp. 365 – 380 https://doi.org/10.4018/978-1-7998-8050-9.ch018.
  7. Sridhar Babu, B. and Kumar, K. Characterization of Coatings through Indentation technique. In Kumar, K., Sridhar Babu, B. and Davim, J. P. Eds. Coatings – Materials, Processes, Characterization and Optimization, Springer Nature, Germany Pages 139 – 150 https://doi.org/10.1007/978-3-030-62163-6_6.
  8. Ranjan, C., Kalita, H., Sridhar Babu, B. and Kumar, K., Application of Evolutionary Optimization Techniques Towards Non – Traditional Machining for Performance Enhancement, In Bose, G. K. and Pain, P. eds. Machine Learning Applications in Non-Conventional Machining Processes, IGI Global USA Pages 181–194 https://doi.org/10.4018/978-1-7998-3624-7.ch011.
  9. Ranjan, C., Kalita, H., Vishnu Vardhan, T. and Kumar, K., Programming for Machining in Electrical Discharge Machine – A Non – Conventional Machining Technique, In Bose, G. K. and Pain, P. eds. Machine Learning Applications in Non-Conventional Machining Processes, IGI Global USA Pages 55–75 https://doi.org/10.4018/978-1-7998-3624-7.ch005.
  10. Kumari, N. and Kumar, K. Orthopedic Application of Plant Based Composites: A Case on Orthotic Callipers. In Kumar, K. and Davim, J.P. eds. Plant and Animal Based Composites. De Gruyter, Germany Pages 71–90 https://doi.org/10.1515/9783110695373-005  
  11. Kalita, H., Kumar, K., and Davim, J.P., Current tools and methodology for a sustainable product life-cycle and design. In Kumar, K., Zindani, D. and Davim, J. P. Eds. Sustainable Manufacturing and Design, Woodhead Publishing (an imprint of Elsevier), UK. Pages 3-17 https://doi.org/10.1016/B978-0-12-822124-2.00001-9

2020

  1. Kuppusamy, R. R. P., Rout, S. and Kumar, K., Advanced Manufacturing Techniques for Composite Structures Used in Aerospace Industries. In Kumar, K. and Davim, J.P., eds. Modern Manufacturing Processes, Woodhead Publishing (an imprint of Elsevier), UK. Pages 3-12. https://doi.org/10.1016/B978-0-12-819496-6.00001-4
  2. Roy, S., & Kumar, K. (2020). Strategic Best-in-Class Performance for Voice to Customer: Is Big Data in Logistics a Perfect Match? In Management Association, I. (Ed.), Web Services: Concepts, Methodologies, Tools, and Applications, IGI Global, USA. pp. 2086-2098. http://doi:10.4018/978-1-5225-7501-6.ch107
  3. Zindani, D., & Kumar, K. (2020). Selection of Prototyping Process and Part Orientation for Virtually Manufactured Gears. In Management Association, I. (Ed.), Additive Manufacturing: Breakthroughs in Research and Practice (pp. 353-369). IGI Global. http://doi:10.4018/978-1-5225-9624-0.ch015.
  4. Zindani, D., & Kumar, K. (2020). Integrated Manufacturing System for Complex Geometries: Towards Zero Waste in Additive Manufacturing. In Management Association, I. (Ed.), Additive Manufacturing: Breakthroughs in Research and Practice (pp. 321-331). IGI Global. http://doi:10.4018/978-1-5225-9624-0.ch013
  5. Preeti, Roy, S. and Kumar, K. Radial Data Envelopment Analysis Approach to Performance measurement: Study on Indian banking system, In Kumar, K. and Davim, J.P., eds. Supply Chain Intelligence: Application and Optimization (Under book series Management and Industrial Engineering), Springer Nature, Germany, pp 155 – 171. https://doi.org/10.1007/978-3-030-46425-7_8
  6. Kalita, H., Kumar, K. and Davim, J.P. Classi?cation of Factors Associated with a Closed-Loop Supply Chain System, Their Modelling Methods and Strategies, In Kumar, K. and Davim, J.P., eds. Supply Chain Intelligence: Application and Optimization (Under book series Management and Industrial Engineering), Springer Nature, Germany, pp 19–36 https://doi.org/10.1007/978-3-030-46425-7_2.
  7. Roy, S. and Kumar, K., Strategic Planning of Cold Supply Chain towards Good Manufacturing Practices: Issues and Challenges in Indian Market. In Information Resources Management Association, USA eds. Supply Chain and Logistics Management: Concepts, Methodologies, Tools, and Applications IGI Global USA pp. 1682 – 1694. https://doi.org/10.4018/978-1-7998-0945-6.ch081.
  8. Kalita, H. and Kumar, K., Generation of slip line fields incorporating BUE and shear zone to model machining using MATLAB. In BBVL. Deepak, DRK Parhi and Pankaj C. Jena (eds.), Innovative Product Design and Intelligent Manufacturing Systems, Lecture Notes in Mechanical Engineering, Springer, pp 409 – 419, https://doi.org/10.1007/978-981-15-2696-1_40.  
  9. Kalita, H. and Kumar, K., Digital Technology Integration in Different Educational Fields: Design, Architecture, Tourism and Business Engineering, In Kumar, K. and Davim, J.P., eds. Methodologies and Outcomes of Engineering and Technological Pedagogy, IGI Global USA. pp 112-131. https://doi.org/10.4018/978-1-7998-2245-5.ch008.    
  10. Zindani, D., Kumar, K. and Davim, J.P., Sustainability Manufacturing Systems Design. In Hashmi, S. and Choudhury, I. eds. Encyclopedia of Renewable and Sustainable Materials, Elsevier (USA). vol. 5 pp 512 – 518 https://doi.org/10.1016/B978-0-12-803581-8.11493-6.   

2019

  1. Zindani, D., Kumar, K. and Davim, J.P., Bio Composite for Orthotic Calipers. In Bajpai, P. K., ed. Processing of Natural Fiber Reinforced Bio-Composites. Woodhead Publishing India pp 175 – 187.
  2. Zindani, D., Kumar, K. and Davim, J.P., Fire Performance of Natural Fiber Reinforced Polymeric Composites in Bajpai, Singh eds. Reinforced Polymer Composites Processing, Characterization and Post Life Cycle Assessment, Wiley_VCH, Germany. pp 209 – 224 https://doi.org/10.1002/9783527820979.ch11
  3. Kalita, H., Zindani, D. and Kumar, K., Additive Manufacturing: A Tool for Better Education, In Kumar, K., Zindani, D. and Davim, J.P. eds. Additive Manufacturing Technologies from an Optimization Perspective, IGI Global USA. pp 41 – 76, https://doi.org/10.4018/978-1-5225-9167-2.ch003.
  4. Kalita, H., Zindani, D. and Kumar, K., Industries of Future. In Kumar, K., Zindani, D. and Davim, J.P. eds. Digital Manufacturing and Assembly Systems in Industry 4.0, CRC Press, USA pp. 59 – 71.
  5. Zindani, D., Kumar, K. and Davim, J.P., Metallic Biomaterials – A Review. In Davim, J. P. eds. Mechanical Behaviour of Biomaterials. WoodHead/Elsevier (USA). pp. 83 – 99. https://doi.org/10.1016/B978-0-08-102174-3.00004-8.
  6. Zindani, D., Kumar, K. and Davim, J.P., Mechanical Behaviour of Epoxy Based Green Composite. In Rakesh, P. K. and Singh, I. eds. Processing of Green Composites. Springer Nature Singapore Pte Ltd. pp. 81 – 90. https://doi.org/10.1007/978-981-13-6019-0_6  
  7. Bhuyan, D. and Kumar, K. A Brief History of Prosthetics and Orthotics of the Lower Body and Their Types, In Kumar, K. and Davim, J.P. eds. Design, Development, and Optimization of Bio-Mechatronic Engineering Products, IGI Global USA. pp. 36 – 56 https://doi.org/10.4018/978-1-5225-8235-9.ch002.
  8. Bhuyan, D. and Kumar, K. Design of a Prosthetic Ankle Complex: A Study in Biomimetic System Design, In Kumar, K. and Davim, J.P. eds. Design, Development, and Optimization of Bio-Mechatronic Engineering Products, IGI Global, USA pp. 101 – 125 https://doi.org/10.4018/978-1-5225-8235-9.ch005.
  9. Zindani, D., Kumar, K. and Davim, J.P., An Insight into Plant Based Biodegradable Composites. In Kumar, K., and Davim, J.P. eds. Biodegradable Composites – Materials, Manufacturing and Engineering, De Gruyter, Germany. pp. 3 – 12 https://doi.org/10.1515/9783110603699-001

2018

  1. Zindani, D., Roy, A. K. and Kumar, K., Design of Impeller Blade of Mixed Flow Pump: A Comparative Analysis. In Kumar, K. and Davim, J.P. eds. Design and Optimization of Engineering Products. IGI Global USA. pp. 37 – 66. https://doi.org/10.4018/978-1-5225-3401-3.ch003.
  2. Kumari, N. and Kumar, K., Lower Body Orthotic Calipers with Composite Braces. In Kumar, K. and Davim, J.P. eds. Design and Optimization of Engineering Products. IGI Global USA pp. 133 – 151. https://doi.org/10.4018/978-1-5225-3401-3.ch007.
  3. Zindani, D. and Kumar, K., Selection of Rapid Prototyping Process and Part Orientation for Virtually Manufactured Gears. In Hernández Arellano, J. L., Maldonado Macias, A. A., Castillo Martinez, J. A. and Coronado, P. P. eds. Handbook of Research on Ergonomics and Product Design. IGI Global USA pp. 364 – 380. https://doi.org/10.4018/978-1-5225-5234-5.ch020.
  4. Zindani, D., Kumar, K. and Davim, J.P., Fabrication of Functionally Graded Materials: A Review. In Kumar, K. and Davim, J.P. eds. Hierarchical Composite Materials. De Gruyter, Germany pp. 1 – 20 https://doi.org/10.1515/9783110545104-001.
  5. Zindani, D. and Kumar, K., Industrial Applications of Polymer Composite Materials. In Kumar, K. and Davim, J.P. eds. Composites and Advanced Materials for Industrial Applications IGI Global USA pp. 1 – 15. https://doi.org/10.4018/978-1-5225-5216-1.ch001.
  6. Kumari, N. and Kumar, K., Fabrication of Orthotic Calipers with Epoxy Based Green Composite. In Kumar, K. and Davim, J.P. eds. Composites and Advanced Materials for Industrial Applications IGI Global USA pp. 157 – 176. https://doi.org/10.4018/978-1-5225-5216-1.ch008.
  7. Faisal, N. Kumar, K. and Roy, A. K., Fuzzy Logic Approach for Material Selection in Mechanical Engineering Design, In Ram, M. ed. Advanced Fuzzy Logic Approaches in Engineering Science. IGI Global USA pp. 99 – 116. https://doi.org/10.4018/978-1-5225-5709-8.ch005
  8. Singh, S., Zindani, D., Roy, A. K. and Kumar, K., Application of Renewable Energy System With Fuzzy Logic. In Ram, M. ed. Advanced Fuzzy Logic Approaches in Engineering Science. IGI Global USA pp. 284 – 309. https://doi.org/10.4018/978-1-5225-5709-8.ch013.
  9. Zindani, D., Kumar, K., Roy, A. K. and Davim, J.P., Fuzzy Logic for Machining Applications: Review. In Ram, M. ed. Advanced Fuzzy Logic Approaches in Engineering Science. IGI Global USA pp. 341 – 361. https://doi.org/10.4018/978-1-5225-5709-8.ch016.
  10. Faisal, N., Bhowmik, S. and Kumar, K., Recent Developments in Wire Electrical Discharge Machining       . Kumar, K., Kumari, N and Davim, J.P. eds. Non-Conventional Machining in Modern Manufacturing Systems. IGI Global USA pp. 125 – 152. https://doi.org/10.4018/978-1-5225-6161-3.ch006.
  11. Zindani, D. and Kumar, K., An Investigation into Non-Conventional Machining of Metal Matrix Composites. In Kumar, K., Kumari, N and Davim, J.P. eds. Non-Conventional Machining in Modern Manufacturing Systems. IGI Global USA pp. 175 – 187. https://doi.org/10.4018/978-1-5225-6161-3.ch008.
  12. Faisal, N., Zindani, D. and Kumar, K., Micro and Nano Machining – An Industrial Perspective. In Kumar, K., Zindani, D., Kumari, N and Davim, J.P. eds. Micro and Nano Machining of Engineering Materials - Recent Developments. Springer Nature, pp. 9 – 29. https://doi.org/10.1007/978-3-319-99900-5_2
  13. Faisal, N., Zindani, D., Kumar, K. and Bhowmik, S., Laser Micromachining of Engineering Materials – A Review. In Kumar, K., Zindani, D., Kumari, N and Davim, J.P. eds. Micro and Nano Machining of Engineering Materials - Recent Developments. Springer Nature, pp. 121 – 136. https://doi.org/10.1007/978-3-319-99900-5_6
  14. Zindani, D. and Kumar, K., Integrated Manufacturing System for Complex Geometries: Towards Zero Waste in Additive Manufacturing. In Uthayakumar, M., Aravind Raj, S., Ko, T. J., Thirumalai K. S., Davim, J. P. eds. Green Engineering Techniques for Modern Manufacturing. IGI Global USA pp. 14 – 23. https://doi.org/10.4018/978-1-5225-5445-5.ch002.
  15. Zindani, D., Faisal, N. and Kumar, K., Optimization of Process Parameters for Electro-Chemical Machining of EN19: Using Particle Swamp Optimization. In Uthayakumar, M., Aravind Raj, S., Ko, T. J., Thirumalai K. S., Davim, J. P. eds. Green Engineering Techniques for Modern Manufacturing. IGI Global USA pp. 127 – 142. https://doi.org/10.4018/978-1-5225-5445-5.ch008.
  16. Farrukh, Md., Faisal, N. and Kumar, K., Earthquake Resistant Design: Issues and Challenges. In Belgasmia, M. ed. Optimization of Design for Better Structural Capacity. IGI Global USA pp. 201 – 221. https://doi.org/10.4018/978-1-5225-7059-2.ch008.
  17. Faisal, N. and Kumar, K., Recycling & Reuse of Building Materials from Construction and Demolition: An Environmental Evaluation for Sustainable Growth and Development. In eds. Koç, G. and Christiansen, B. Reusable and Sustainable Building Materials in Modern Architecture. IGI Global USA pp. 60 – 79. https://doi.org/10.4018/978-1-5225-6995-4.ch003.

2017

  1. Kumar, K. and Davim, J.P., 2017. Identification of Optimal Process Parameters in Electro-Discharge Machining Using ANN and PSO. In Ram, M. and Davim, J.P. eds. Soft Computing Techniques and Applications in Mechanical Engineering. IGI Global USA. pp. 72 – 90. https://doi.org/10.4018/978-1-5225-3035-0.ch003.
  2. Dash, N., Roy, A. K., Debta, S. and Kumar, K., Optimization of Process Parameters in Plasma Arc Cutting Applying Genetic Algorithm and Fuzzy Logic. In Ram, M. and Davim, J.P. eds. Soft Computing Techniques and Applications in Mechanical Engineering. IGI Global USA pp. 123 – 139. https://doi.org/10.4018/978-1-5225-3035-0.ch005.
  3. Zindani, D., Roy, A. K. and Kumar, K. Mass Optimization of Mixed Flow Pump Impeller Blade based on Thermal and Structural Loading Conditions Blade Designed Using Mean Stream Line Theory. In Choi, Hongseok ed. Introduction to Mechanical Engineering (ISBN: 978–81–935729–7–9). Research India Publications INDIA pp. 31 – 41.
  4. Dash, N., Debta, S. and Kumar, K., 2017. Application of Artificial Neural Network and Particle Swarm Optimization for Optimization in Advanced Manufacturing – A Case with CNC Lathe. In Vasant, P., Alparslan-Gok, S. Z., and Weber G-W. eds. Emergent Research on the Application of Optimization Algorithms. IGI Global USA pp. 386 – 406. https://doi.org/10.4018/978-1-5225-2990-3.ch017.
  5. Kumar, K. and Davim, J.P., 2017. Comparative Study of Mechanical and Tribological Behaviour of Thermoplast based Composites: with Inorganic and Natural Particulate Fillers. In Somashekar, R. and Thejas Urs G. eds. Emergent Research on Polymeric and Composite Materials. IGI Global USA pp. 78 – 98. https://doi.org/10.4018/978-1-5225-3023-7.ch003.
  6. Kumari, N. and Kumar K., 2017. Efficacy of Composites for Fabrication of Orthotic Calipers. In Somashekar, R. and Thejas Urs G. eds. Emergent Research on Polymeric and Composite Materials. IGI Global USA pp. 267 – 286. https://doi.org/10.4018/978-1-5225-3023-7.ch012.
  7. Roy, S. and Kumar, K. 2017. Strategic Planning of Cold Supply Chain towards Good Manufacturing Practices: Issues and Challenges in Indian Market. In Rishi, O.P. and Sharma, A. eds. Maximizing Business Performance and Efficiency through Intelligent Systems. IGI Global USA pp. 200 – 215. https://doi.org/10.4018/978–1–5225–2234–8.ch011.    
  8. Roy, S. and Kumar, K. 2017. Strategic Best-in-Class Performance For Voice To Customer: Is Big Data in Logistics a Perfect Match? In Trivedi, S.K., Dey S., Kumar, A. and Panda, T.K. eds. Advanced Data Mining Techniques and Applications for Business Intelligence. IGI Global USA pp. 287 – 299. https://doi.org/10.4018/978-1-5225-2031-3.ch017.   
  9. Roy, S., Kumar, K. and Davim, J.P. 2017. Optimization of Process Parameters Using Soft Computing Techniques: A Case with Wire Electrical Discharge Machining. In Shandilya, S. K., Shandilya, S., Kusumdeep, Nagar, A. K. eds. Handbook of Research on Nature-Inspired Soft Computing and Algorithms. IGI Global USA pp. 177 – 220. https://doi.org/10.4018/978-1-5225-2128-0.ch006.   
  10. Das, M.K., Barman, T.K., Sahoo, P. and Kumar K., 2017. Process Optimization in Non-Conventional Processes: Experimentation with Plasma Arc Cutting. In Das, R. and Pradhan, M.K., eds. Manufacturing Process Modelling and Optimization Strategies. IGI Global USA pp. 82 – 119. https://doi.org/10.4018/978-1-5225-2440-3.ch005.

2016

  1. Roy, A. K., Roy, S. and Kumar, K. 2016. Strategic Designing and Optimization of Mixed Flow Impeller Blades for Maritime Applications. In: Zezzatti A. O., Sánchez, J., Campos, G. C. and Lourdes, M. eds. Handbook of Research on Military, Aeronautical, and Maritime Logistics and Operations USA: IGI Global, pp. 470 – 508. https://doi.org/10.4018/978-1-4666-9779-9.ch025.
  2. Roy, S. and Kumar, K. 2016. Optimization of Inventory for Optimal Replenishment Policies and Lead time with Time varying Demand- a Genetic Algorithm Approach. In: Shah, N. and Mittal. M. eds. Optimal Inventory Control and Management Techniques. USA: IGI Global, pp. 201 – 221. https://doi.org/10.4018/978-1-4666-9888-8.ch010.
  3. Vikas, Roy, S. and Kumar, K. 2016. Sustainable Operation Planning in Lean Manufacturing - a case with Non-traditional Electro-Discharge Machining. In  Hernández, G. A., Sánchez-Ramírez, C., and García-Alcaraz, J. L. eds. Handbook of Research on Managerial Strategies for Achieving Optimal Performance in Industrial Processes, IGI Global USA pp. 518 – 544. https://doi.org/10.4018/978-1-5225-0130-5.ch024
  4. Tiwari, A., Roy, S. and Kumar, K. 2016. Sustainable Non Traditional Manufacturing Processes - A Case with Electrochemical Machining (ECM). In Dubey, R. and Gunasekaran, A. eds. Handbook of Research on Strategic Management of Sustainable Manufacturing Operations. IGI Global USA pp. 227 – 271. https://doi.org/10.4018/978-1-5225-0350-7.ch011.
  5. Roy, S., Bhowmik, S., Davim, J.P. and Kumar, K. 2016. Estimation of Mechanical and Tribological Properties of Epoxy Based Green Composites. In Verma, D., Jain, S., Zhang, X. and Gope, P.C. eds. Green Approaches to Biocomposite Materials Science and Engineering, IGI Global USA pp. 96 – 124. https://doi.org/10.4018/978-1-5225-0424-5.ch005.
  6. Roy, S., Davim, J.P. and Kumar, K. 2016. Optimization of Process Parameters Using Taguchi Coupled Genetic Algorithm: Machining in CNC Lathe. In Davim, J.P. and Ram, M. eds. Mathematical Concepts and Applications in Mechanical Engineering and Mechatronics IGI Global USA pp. 67 – 93. https://doi.org/10.4018/978-1-5225-1639-2.ch004.

2014

  1. Chanda, B., Kumar, R., Kumar, K. and Bhowmik, S. 2014. Optimisation of Mechanical Properties of Wood Dust-reinforced Epoxy Composite Using Grey Relational Analysis. In: K.N. Das et al. (eds.), Proceedings of Fourth International Conference on Soft Computing for Problem Solving, Advances in Intelligent Systems and Computing 336, Springer. pp. 13 – 24. https://doi.org/10.1007/978-81-322-2220-0_2.
Intellectual Property Rights (IPR)

PATENTS (39)

INDIAN

UTILITY PATENT

Published (06)

  1. Indian Patent Application no. 1518/KOL/2007 dated 02.11.2007 (Title “Virtual Manufacturing of Transmission Elements”), Official Journal of The Patent Office; Issue 23/2009 dated 05/06/2009 Page No. 26207.
  2. Indian Patent Application no. 1319/KOL/2015 dated 22.12.2015 (Title “Use of Dampers in Prosthetic Ankle”), Official Journal of The Patent Office; Issue 25/2017 dated 23/06/2017 Page No. 21709.
  3. Indian Patent Application no. 1318/KOL/2015 dated 22.12.2015 (Title “Method of Synthesis of Functionally Graded Composite Materials Using a Magnetic Setup”), Official Journal of The Patent Office; Issue 25/2017 dated 23/06/2017 Page No. 21700.
  4. Indian Patent Application no. 201631001502 dated 15.01.2016 (Title “Method of Synthesis of Functionally Graded Composite Materials Using an Electro Chemical Setup”), Official Journal of The Patent Office; Issue 29/2017 dated 21/07/2017 Page no. 24772
  5. Indian Patent Application no. 201631009267 dated 17.03.2016 (Title “Prosthetic Heart Valve”), Official Journal of The Patent Office; Issue 38/2017 Dated 22/09/2017 Page No. 33179
  6. Indian Patent Application no. 202431028924 dated 09.04.2024 (Title “A solar still apparatus and method of use thereof”), Official Journal of The Patent Office; Issue 16/2024 Dated 19/04/2024 Page No. 37568
  7. Indian Patent Application No. 202431097998 Dated 11.12.2024 (Title “A system for Optimizing Process Parameters of An EDM Apparatus”), Official Journal of The Patent Office; Issue 52/2024 Dated 27/12/2024 Page No. 130031

DESIGN PATENT

Applied (3)

  1. Indian Design Application No. 440296-001 dated 11.12.2024 (Title: “Helically Twisted Drill-Type Pin Fin”)
  2. Indian Design Application No. 438639-001 dated 27.11.2024 (Title: “Hovercraft Frame”)
  3. Indian Design Application No. 437719-001 dated 18.11.2024 (Title: “Square threaded pin fin for enhancing heat transfer”)

Granted (12)

  1. Indian Design No. 278564-001 dated 22.12.2015 (Title: “Prosthetic Ankle Joint”)
  2. Indian Design No. 281607-001 dated 17.03.2016 (Title: “Prosthetic Heart Valve”)
  3. Indian Design No. 358450-001 dated 12.02.2022 (Title: “Suction Pad for Assisting Vacuum Operated Vertical Wall Climbing System”)
  4. Indian Design No. 361118-001 dated 23.03.2022 (Title “Design of Solar Cooker Operative Both During Sun Shine and Off-Sun Shine Hours”)
  5. Indian Design No. 361119-001 dated 23.03.2022 (Title “Design of Solar Operated Pedalo Water Boat for Garbage Collection from Lake”)
  6. Indian Design No. 362093-001 dated 06.04.2022 (Title “Machine for Changing Automotive Wheel”).
  7. Indian Design No. 366513-001 dated 21.06.2022 (Title “Design of Automated Egg Incubator Turner”)
  8. Indian Design No. 366514-001 dated 21.06.2022 (Title “Design of Coil Wire Heater for Automated Egg Incubator”)
  9. Indian Design No. 366512-001 dated 21.06.2022 (Title “Design of Automated Solar Steam khoya Making Vessel”)
  10. Indian Design No. 389869-001 dated 05.07.2023 (Title: “Frame for Agricultural Drone”)
  11. Indian Design No. 400427-001 dated 22.11.2023 (Title: “Rear Safety Guard Frame for Non-Gear Type Motorized Vehicles”)
  12. Indian Design No. 389868-001 dated 05.07.2023 (Title: “Bicycle Seat”)

COPYRIGHT

Applied (02)

  1. Copyrights Application No. 39456/2024-CO/SW dated 16.12.2024 (Title: “EDMOptima”)
  2. Copyrights Application No. 26682/2024-CO/SW Dated 24.08.2024 (Title: “Software for Ablative Thermal Protection System Design, Development and Estimation”)

Registered (02)

  1. Copyrights Registration No. L-30685 / 2008 Dated 03.06.2008 (Title: “Virtual manufacturing of transmission elements in particular gears”)
  2. Copyrights Registration No. SW-16283/2023 Dated 24.05.2023 (Title: “Web Scrapper Bot for Downloading and Saving Periodicals”)

FOREIGN

DESIGN PATENT

Granted (04)

  1. UK Design Number 6306109 Dated 28.08.2023 (Title: “Wire Making Tool”)
  2. UK Design Application Number 6366650 Dated 16.05.2024 (Title: “Drone Protective Cage”)
  3. UK Design Application Number 6383640 Dated 09.08.2024 (Title: “Flapping Wings Air Vehicles”)
  4. UK Design Application Number 6393709 Dated 02.10.2024 (Title: “Indoor Drone Flying Apparatus”)

UTILITY PATENT

Granted (08)

  1. Australian Innovation Patent No. 2021103989 Dated 09.07.2021 (Title “A Portable Footbridge Apparatus to Support Transverse Loading”).
  2. German Utility Model Grant no. 202022103948 dated 20.07.2022 (Title “A System for Preparing Polymeric Composite Based Biodegradable Floor Tiles”)
  3. German Utility Model Grant no. 202022103828 Dated 01.08.2022 (Title “A Controller System for Grid-Connected Voltage Source Converters Powered by Distributed Energy Resources”)
  4. German Utility Model Grant no. 202022103058 dated 02.08.2022 (Title “An apparatus for an Automatic Wheel Changing Mechanism”)
  5. German Utility Model Grant no. 202022104023 dated 09.08.2022 (Title “An Unconventional Lossless Data Compression System”)
  6. German Utility Model Grant no. 202022105381 dated 26.09.2022 (Title “A Machine Learning Based Intelligent Dust Suppression System”)
  7. South African Patent Grant no. 2022/07407 dated 28.09.2022 (Title “A Device and A Method for Manufacturing a Functionally Graded Composite Material”)
  8. South African Patent Grant no. 2022/08781 dated 26.10.2022 (Title “A Device for Manufacturing Functionally Graded Composite Material Matrix and A Method Thereof”)

Published (01)

  1. US Patent Application No. 12/000,061 dated 07.12.2007 (Title “Virtual Manufacturing of Transmission Elements”).
Fellow
  1. Fellow of Institute of Engineers (I) (F – 1310883)